H₂-rich syngas production by fluidized bed gasification of biomass and plastic fuel

This paper reports the results of gasification tests using a catalytic fluidized bed gasifier to obtain a H₂-rich stream by feeding different pellets made of wood, biomass/plastic and olive husks to the gasifier. The effects of both the steam supply and an in-bed catalyst on gasifier performance have been investigated. In general, pelletization was an effective pre-treatment for improving the homogeneity of the fuel and the reliability of the feeding devices. The use of biomass/plastic pellets in a catalyst bed yielded good results in terms of the hydrogen concentration (up to 32% vol.), even if an increase in tar production and in the fine/carbon elutriation rate was observed in comparison with wood pellets.     

Storage stability of biocrude oils from fast pyrolysis of poultry litter

The unstable nature of biocrude oils produced from conventional pyrolysis of biomass is one of the properties that limits its application. In the disposal of poultry litter via pyrolysis technology, the biocrude oil produced as a value-added product can be used for on farm applications. In this study, we investigated the influence of bedding material (wood shavings) on the storage stability of biocrude oils produced from the fast pyrolysis of poultry litter. The biocrude oils produced from manure, wood (pine and oak), and mixtures of manure and wood in proportions (75:25 50:50, and 25:75 w/w%) were stored under ambient conditions in sealed glass vials for a period of 6 months and their stability were monitored by measuring the changes in viscosity over time. The manure oil had the lowest rate of viscosity change and thus was relatively the most stable and the oils from the 50:50 w/w% litter mixtures were the least stable. The rate of viscosity change of the manure biocrude oil was 1.33 cP/day and that of the 50/50 litter mixture was 7.6 cP/day for pine and 4.17 cP/day for oak.The spectrometric analyses of the biocrude oils showed that the presence of highly reactive oxygenated functionalities in the oil were responsible for the instability characteristic of the litter biocrude oils. The poor stability of the biocrude oil from the 50:50 w/w% litter mixtures was attributed to reactions between nitrogenous compounds (amides) from protein degradation and oxygenated compounds from the decomposition of polysaccharides and lignin. The addition of 10% methanol and 10% ethanol to the oil from 50% manure and 50% pine reduced the initial viscosity of the oil and was also beneficial in slowing down the rate of viscosity change during storage.     

Wood pellet fly ash and bottom ash as an effective liming agent and nutrient source for rye grass (Lolium perenne L.) and oats (Avena sativa)

Fly ash (FA) and bottom ash (BA) from a softwood pellet boiler were characterized and evaluated as soil amendments. In a greenhouse study, two plant species (rye grass, Lolium perenne L. and oats, Avena sativa) were grown in three different treatments (1% FA, 1% BA, non-amended control) of a silty loam soil. Total concentrations of plant nutrients Ca, K, Mg, P and Zn in both ashes were elevated compared to conventional wood ash. Concentrations of Cd, Cr, Pb, Se and Zn were found to be elevated in the FA relative to BA and the non-amended soil. At 28 d, oat above-ground biomass was found to be significantly greater in soil amended with FA. Potassium and Mo plant tissue concentrations were significantly increased by addition of either ash, and FA significantly increased Zn tissue concentrations. Cadmium and Hg tissue concentrations were elevated in some cases. As soil amendments, either pellet ash is an effective liming agent and nutrient source, but high concentrations of Cd and Zn in FA may preclude its use as an agricultural soil amendment in some jurisdictions. Lower ash application rates than those used in this study (i.e. <1%) may still provide sufficient nutrients and effective neutralization of soil acidity.     

Amendment of arsenic and chromium polluted soil from wood preservation by iron residues from water treatment

An iron-rich water treatment residue (WTR) consisting mainly of ferrihydrite was used for immobilization of arsenic and chromium in a soil contaminated by wood preservatives. A leaching batch experiment was conducted using two soils, a highly contaminated soil (1033 mg kg⁻¹ As and 371 mg kg⁻¹ Cr) and slightly contaminated soil (225 mg kg⁻¹ As and 27 mg kg⁻¹ Cr). Compared to an untreated reference soil, amendment with 5% WTR reduced leaching in the highly contaminated soil by 91% for Cr and 98% for As. No aging effect was observed after 103 d. In a small field experiment, soil was mixed with 2.5% WTR in situ. Pore water was extracted during 3 years from the amended soil and a control site. Pore water arsenic concentrations in the amended soil were more than two orders of magnitude lower than in the control for the upper samplers. An increased release of arsenic was observed during winter in both fields, mostly in the deepest samplers. This is likely due to the formation of a pseudo-gley because of precipitation surplus. Stabilization of arsenic and chromium contaminated soil using WTR is a promising method but the transformation of ferrihydrite in soil proves a concern in case of waterlogged soils. Still the amendment minimized the leaching of arsenic, even in cases of seasonal releases.     

木材加工废水处理工程实例分析

针对某木材加工企业生产废水高COD、高氨氮、高色度、含甲醛等特点,采用“芬顿氧化+A/O+沉淀+气浮”组合工艺对原废水处理厂进行扩容提标改造。该工程设计处理规模为600 t/d,总投资为340万元,直接运行成本为4.83元/t。运行效果表明:采用芬顿氧化预处理洗胶废水可有效降解甲醛等高毒性的有机物,增设载体的A/O工艺可提高COD去除效果与抗冲击负荷能力,组合工艺出水COD<400 mg/L,氨氮<20 mg/L,TN<40 mg/L,TP<2 mg/L,甲醛<2 mg/L。     

Characterization of products obtained from pyrolysis and steam gasification of wood waste,RDF, and RPF

Pyrolysis and steam gasification of woody biomass chip (WBC) obtained from construction and demolition wastes, refuse-derived fuel (RDF), and refuse paper and plastic fuel (RPF) were performed at various temperatures using a lab-scale instrument. The gas, liquid, and solid products were examined to determine their generation amounts, properties, and the carbon balance between raw material and products.The amount of product gas and its hydrogen concentration showed a considerable difference depending on pyrolysis and steam gasification at higher temperature. The reaction of steam and solid product, char, contributed to an increase in gas amount and hydrogen concentration. The amount of liquid products generated greatly depended on temperature rather than pyrolysis or steam gasification. The compositions of liquid product varied relying on raw materials used at 500 °C but the polycyclic aromatic hydrocarbons became the major compounds at 900 °C irrespective of the raw materials used. Almost fixed carbon (FC) of raw materials remained as solid products under pyrolysis condition whereas FC started to decompose at 700 °C under steam gasification condition.For WBC, both char utilization by pyrolysis at low temperature (500 °C) and syngas recovery by steam gasification at higher temperature (900 °C) might be practical options. From the results of carbon balance of RDF and RPF, it was confirmed that the carbon conversion to liquid products conspicuously increased as the amount of plastic increased in the raw material. To recover feedstock from RPF, pyrolysis for oil recovery at low temperature (500 °C) might be one of viable options. Steam gasification at 900 °C could be an option but the method of tar reforming (e.g. catalyst utilization) should be considered.     

Dynamics of space use and male vigour amongst wood mice,Apodemus sylvaticus,in the cereal ecosystem

The spatial organisation of male and female wood mice,Apodemus sylvaticus, was investigated in a large-scale radio-tracking study on arable farmland near Oxford, United Kingdom, during the breeding season. Both sexes had significantly larger home ranges in the breeding season than at other times, and the breeding season home ranges of male (X = 1.44 ha) were significantly larger than those of females (X = 0.49 ha). Home range overlap was significantly greater between males, and between males and females, than it was between females. Overlap between males tended to be greatest in heavily utilised areas. Except during sexual consortship, there was minimal evidence of dynamic interaction among individuals. Home range sizes of breeding males varied widely, as did their body weights. There was no relationship between male body weight and home range size or any other movement parameter. However, males with the largest home ranges had the highest scores on all other movement parameters, indicating that they expended more energy in movement. These more vigorous males had access to the home ranges of more females than did males with small home ranges.     

Effects on Wood Quality Characteristics of Hormone Breeding of Beech Seedlings Treated by Polystimulin-A6

Abstract

The aim of this study is to determine the effectiveness of polystimulin-A6 (PS-A6) on the wood quality characteristics of beech (Fagus orientalis L.) seedlings. In order to examine the seedling development, the total of 1200 seedlings treated with PS-A6 at four different concentrations and a total of 300 control seedlings were measured related to seedling height, root collar diameter, stem dry weight, root dry weight, leaf width, and length. It was also counted the leaf numbers. Finally, it was found that there was a very significant difference between PS-A6 treatments and control treatments. The seedlings treated with PS-A6 seem to perform well in comparison to control seedlings.     

Perceptions, attitudes and interest of Swedish architects towards the use of wood frames in multi-storey buildings

Use of wood frames from sustainable forestry instead of non-wood frames in multi-storey buildings can reduce primary energy use and carbon dioxide emissions in construction. However, construction actors might have different perceptions towards wood frames than towards steel and concrete frames. Such perceptions may influence the actors’ decision to adopt wood frames. In this study we use a web-based questionnaire to assess Swedish architects’ perceptions, attitudes and interest towards steel, concrete and wood frames in multi-storey buildings (n = 412). Results indicate that the responding architects find concrete the most suitable frame material in buildings of 3-8 storeys, mainly because of the performance of concrete with regards to the engineering aspects (e.g. stability and fire safety) that were considered important in the choice of frame material. Although wood is considered the least suitable frame material, the overall attitude towards, and interest in, using wood is positive and related to the perceived environmental benefits of wood. This may derive from an increased discussion of and information about the environmental impact of buildings. Wood may be perceived as new and innovative while not considered as adequately proven as steel and concrete with regards to engineering aspects.