Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.     

An improved method to study the impact of pesticide sprays on small song birds

Abstract

Four test groups of small songbirds (Zebra Finch, Poephila guttata) were sprayed in a chamber with varying concentrations of fenitrothion. Exposure levels were assessed by monitoring air concentrations, deposits of the active ingredient (AI) on glass plates and droplets/cm² on Kromekote® cards. All indices of exposure were linearly correlated and the mean AI deposit on glass plates for the four groups tested were equivalent to 38, 51, 139 and 255 g/ha or 14%, 18%, 50% and 91% of the highest permissible emitted rate for broadscale forest spraying in Canada. Significant depression in body weights and brain acetylcholinesterase levels were noted only for the highest exposure group. Fenitrothion residues in blood were detectable only at the highest exposure level, and in liver at the two higher levels. Carcass and feather residues were much higher than those in blood and liver, and were detectable at all exposure levels but the residues did not increase linearly with exposure. For one of the spray groups, we were able to compute an equivalent acute oral dose based on matching acetylcholinesterase inhibition.     

Appendix

Abstract

An atrazine‐degrading bacterial isolate (M91–3) was able to utilize simazine and cyanazine as N sources for glucose‐dependent growth. The degradation of these three 5‐triazine herbicides was also investigated in binary and ternary mixtures. The organism used atrazine and simazine indiscriminately, whereas cyanazine degradation was slow and delayed until the depletion of the two other herbicides. There was no apparent effect of other commonly used herbicides on the rate of atrazine degradation by M91–3.     

Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

Impact of long‐term pesticide applications on some soil biological parameters

Abstract

The soil oxidative and anaerobic processes, as well as, the microbial biomass were followed during three years in a cotton farm (Tatuí) where the recommended pesticides have been used for several years, and in an experimental field (São Paulo) treated first time with the same pesticides. The oxidative process was monitored by the dehydrogenase (DHA)‐activity using triphenyltetrazolium chloride (TTC) as substrate. The anaerobic process was followed by the iron‐oxide reduction, and the microbial biomass was estimated by the substrate (glucose)‐indiced respiration. Increases in DHA‐activity and in the microbial biomass occurred only in the farm soil, with concomitant decreases in iron‐reduction. In the experimental field soil, the increases in DHA‐activity were followed only by decreases in iron‐reduction. Soil characteristics were the determining factor for different biological parameters after pesticide inputs. All the pesticides produced at least one clear but transient effect.     

Swine wastewater treatment in a two stage sequencing batch reactor using real‐time control

Abstract

A laboratory scale two‐stage sequencing batch reactor (TSSBR) was used to study the effectiveness of pH as a real‐time control parameter in swine wastewater treatment. A Ringlace media was inserted into the A/O (Anoxic/Oxic) reactor for bacteria immobilization. The TSSBR was subjected to three levels of organic loading. The pH and ORP (Oxidation Reduction Potential) patterns obtained were consistent with distinct features, enabling the real‐time control strategy to effectively set a flexible aeration time pending on influent concentration, hence resulting in flexible cycle time and HRT (Hydraulic Retention Time) for the system. The real‐time process ensured a removal efficiency of over 99% and 95%, respectively, for ammonia and TOC (Total Organic Carbon). For NO₃ ^‐‐N and PO₄ ^‐3, the run with influent TOC = 4,000 mg/L yielded the most efficient removal of 61% and 95%, respectively. Test results suggest that pH can be a viable tool for on‐line real‐time control of a biological treatment process.     

Effect of fatty acids and oils on photodegradation of azadirachtin‐A

Abstract

Azadirachtin‐A on exposure to UV‐light (254 nm) as a thin film on glass surface gave a isomerised (Z)‐2‐ methylbut‐2‐enoate product. Half‐life of azadirachtin‐A as thin film under UV light was found to be 48 min. Azadirachtin ‐A was irradiated along with saturated and unsaturated fatty acids, and fatty oils under ultra‐violet light as thin film. Saturated fatty acid increased the rate of photodegradation of azadirachtin‐A, whereas unsaturated fatty acids such as oleic, linoleic and elaidic acid reduced the rate of degradation. Castor, linseed and olive oil accelerated the rate of degradation, whereas neem oil showed no or little change in the rate of degradation of azadirachtin‐A. None of these fatty acids and fatty oils were effective in controlling the rate of degradation of azadirachtin‐A under UV‐light as thin film.     

Interpreting the relationship between pheromone component emission from commercial lures and captures of Helicoverpa zea (boddie) in bucket and cone traps

Abstract

Male corn earworm moths, Helicoverpa zea (Boddie), were captured in conical Texas pheromone traps (cone traps) and bucket traps baited with four different commercial lures manufactured by three different manufacturers. Because significant numbers were captured in bucket traps baited with some of the lures, and none with others, the volatile emissions from all of the lures were sampled and analyzed by gas Chromatographic methods. The numbers of males captured in two types of trap were compared with bait emissions in an endeavor to define a more effective lure for bucket traps. The lure from one manufacturer captured the same numbers of males in both trap types; one captured more in bucket traps than in cone traps, and another captured only a small number in bucket traps. The emission rate of all active compounds from each of the different lures was approximately linear for the duration of the assays. A gas‐liquid Chromatographic peak associated with a third compound, (Z)‐9‐tetradecenal, which reduces behavioral responses, was observed in the emissions from all lures evaluated. The effectiveness of the Hercon (Emmigsville, PA) lure in capturing males in both types of trap was associated with a lower emission of (Z)‐l 1‐hexadecenal, (Z)‐9‐hexadecenal and (Z)‐9‐tetradecenal than from the other lures.     

紫外辐照-催化湿式过氧化氢氧化技术处理酸性大红GR染料废水

采用自制的负载型CuO-ZnO-CeO2/γ-Al2O3催化剂,常温常压下通过紫外辐照-催化湿式氧化技术处理酸性大红GR模拟染料废水。考察了催化剂加入量、H2O2加入量、废水pH、反应时间、初始酸性大红GR质量浓度等对废水脱色率的影响。实验得到最佳工艺条件为初始酸性大红GR质量浓度200mg/L,催化剂加入量10.0g/L,H2O2加入量2.0mL/L,废水pH4,反应时间2h。最佳工艺条件下废水脱色率达99.33%。     

某退役后辐照装置的辐射水平监测与评价

依据国家相关标准对某退役后辐照装置周围的辐射水平进行监测与评价,通过数据评价得出该单位辐照装置退役场所未受到放射性污染,其退役后对环境的辐射影响可以忽略。