Pd/activated carbon sorbents for mid-temperature capture of mercury from coal-derived fuel gas

Higher concentrations of Hg can be emitted from coal pyrolysis or gasification than from coal combustion, especially elemental Hg. Highly efficient Hg removal technology from coal-derived fuel gas is thus of great importance. Based on the very excellent Hg removal ability of Pd and the high adsorption abilities of activated carbon（AC） for H2 S and Hg, a series of Pd/AC sorbents was prepared by using pore volume impregnation, and their performance in capturing Hg and H2 S from coal-derived fuel gas was investigated using a laboratory-scale fixed-bed reactor. The effects of loading amount, reaction temperature and reaction atmosphere on Hg removal from coal-derived fuel gas were studied. The sorbents were characterized by N2 adsorption, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The results indicated that the efficiency of Hg removal increased with the increasing of Pd loading amount, but the effective utilization rate of the active component Pd decreased significantly at the same time. High temperature had a negative influence on the Hg removal. The efficiency of Hg removal in the N2-H2S-H2-CO-Hg atmosphere（simulated coal gas） was higher than that in N2-H2S-Hg and N2-Hg atmospheres, which showed that H2 and CO, with their reducing capacity, could benefit promote the removal of Hg. The XPS results suggested that there were two different ways of capturing Hg over sorbents in N2-H2S-Hg and N2-Hg atmospheres.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

13X分子筛联合强化混凝对微污染水中氨氮去除试验研究

采用0.500,0.200,0.074 mm 3种粒径的13X分子筛联合聚合氯化铝(PAC)去除水中氨氮,比较4种不同投加方式对水中氨氮的去除情况,利用3种强化除浊方案解决因投加分子筛而带来的浊度影响。粒径为0.200 mm的分子筛对水中氨氮去除效果优于其他两种粒径,在投加量为2.5g/L时,氨氮去除率可达76.6%。采用先投加分子筛后投加混凝剂的投加方式优于其他投加方式。缩短快速搅拌时间可以有效去除因投加分子筛带来的浊度增大问题,最大去除率可达96.3%,且对水中氨氮的去除效果影响不大。分子筛联合强化混凝对水中氨氮去除效果明显,粒径不同,去除效果不同,投加方式对于处理效果差别明显,通过缩短快速搅拌的时间,可以有效解决因投加分子筛带来的浊度增加的问题。     

微生物絮凝剂ZS-7的纯化及其结构特征研究

采用透析、乙醇沉淀、凝胶过滤层析对微生物絮凝剂ZS-7进行了纯化.经鉴定纯化后的微生物絮凝剂ZS-7是一种新型的糖蛋白,其产量大约为0.98 g/L发酵液.ZS-7主要由多糖和蛋白质组成,含量分别为91.5%和8.4%.进一步的分析表明ZS-7中含有酸性多糖包括糖醛酸(16.4%)、丙酮酸(7.1%)和乙酸(0.5%).采用凝胶色谱法测得ZS-7的相对分子质量为6.89×104.红外光谱、X射线能谱图和核磁共振图谱说明糖蛋白絮凝剂ZS-7含有羟基、氨基、羧基、甲氧基和磺酸等功能性基团.单糖组成分析说明ZS-7主要由鼠李糖、甘露糖、葡萄糖和半乳糖组成,各单糖的摩尔比大致为:半乳糖∶葡萄糖∶甘露糖∶鼠李糖=142∶2.2∶4.5∶3.4.     

有效微生物技术在渗滤液处理中的应用与发展

介绍了有效微生物(EM)的组成、特点及其处理废水的机理;通过与传统的生化法处理垃圾渗滤液的比较,指出了利用EM技术处理垃圾渗滤液的优势,认为该技术不仅能够提高污染物的去除效率,降低污泥产量,而且能够缩短反应器的响应时间;并介绍了EM制剂在国内外的生产情况,对今后EM技术的发展前景提出了展望.     

Catalysts for decomposing ozone tail gas

The preparation of immobilizing-catalysts for decomposing ozone by using dipping method was studied. XRD, XPS and TEM were used to characterize the catalysts. The three kinds of catalysts were selected preferentially, and their catalytic activities were investigated. The results showed that the catalyst with activated carbon dipping acetate( active components are Mn:Cu = 3:2, active component proportion in catalyst is 15%, calcination temperature is 200℃ ) has the best catalytic activity for ozone decomposing. One gram of catalyst can decompose 17.6g ozone at initial ozone concentration of 2.5g/m^3 and the residence time in reactor of 0.1s. The experimental results also indicated that humidity of reaction system had negative effect on catalytic activity.     

氯化铁絮凝-直接过滤工艺对地下水中As(Ⅴ)的去除机制研究

为探明氯化铁(Fe Cl3)絮凝-直接过滤工艺对地下水中砷(As)的去除过程及机制,分别进行了批吸附实验、现场絮凝-直接过滤实验、扩展X射线精细结构光谱(EXAFS)及电荷分布多位络合(CD-MUSIC)模拟.采集的地下水样品As主要为五价[As(Ⅴ)],浓度为40μg·L-1.现场柱实验直接过滤工艺中Fe投加量为1.5 mg·L-1,出水As(Ⅴ)浓度均低于10μg·L-1,92 h内可提供64 984 L安全饮用水.固体废物毒性浸出实验表明泥饼浸出液中As浓度为3.4μg·L-1,远低于美国环保署限定值(5 mg·L-1).EXAFS和CD-MUSIC模拟表明Fe Cl3絮凝去除地下水中As(Ⅴ)存在两种机制:在p H 3~9.5范围内,As(Ⅴ)主要以双齿双核吸附在氢氧化铁上;p H9.5时,As(Ⅴ)主要与Ca2+和Mg2+形成沉淀而去除.     

X型粉煤灰沸石吸附丙酮及其动力学研究

文章采用碱熔融水热法合成了X型粉煤灰沸石,通过XRD、XRF、SEM、氮气吸附等手段研究了该沸石的结构组成特点,考察了初始浓度、吸附温度和空速对X型粉煤灰沸石吸附丙酮的影响机制,在此基础上,进一步研究了X型粉煤灰沸石对丙酮的吸附动力学及吸附机理。结果表明：合成的X型粉煤灰沸石品质较高,平均粒径为0.83μm,平均孔径为3.2 nm,比表面积为165.8 m²/g,总孔容积为0.133 8 cm2/g,总孔容积为0.133 8 cm³/g;X型粉煤灰沸石吸附丙酮的过程中,初始浓度、空速和温度越高,穿透时间和饱和时间越短;在实验范围内,升高温度会导致吸附量显著降低,增加空速会使吸附量略有下降,而增加初始浓度会使吸附量明显增加,当温度为40℃,初始浓度为777.9 mg/m3/g;X型粉煤灰沸石吸附丙酮的过程中,初始浓度、空速和温度越高,穿透时间和饱和时间越短;在实验范围内,升高温度会导致吸附量显著降低,增加空速会使吸附量略有下降,而增加初始浓度会使吸附量明显增加,当温度为40℃,初始浓度为777.9 mg/m³,空速为75 h3,空速为75 h^(-1)时,X型粉煤灰沸石对丙酮具有最高的吸附量;Bangham模型和准一阶模型能更好地拟合丙酮在X型粉煤灰沸石上的吸附过程,说明丙酮在X型粉煤灰沸石表面的吸附更符合以物理吸附为主的孔道吸附。     

城市污水厂污泥碱性热水解的分离特性

为考察碱性热水解技术分离城市污水厂污泥中有机物和无机物的特性,设计单因素试验研究了Na OH投加量、反应温度和反应时间对分离效果的影响。结果发现:随着Na OH投加量升高,无机物先增多后减少,有机物变化趋势反之;反应温度升高,无机物变化不一致,有机物含量减少;反应时间延长,无机物增多,有机物减少。试验得出:最佳反应条件为Na OH投加量10%、反应温度150℃、反应时间2 h。在此条件下,固相中无机物和有机物含量分别为76.6%和23.4%,液相中COD、NH3-N、TN和TP分别为139 733,446,3 326,238 mg/L。由电子扫描显微镜(scanning electron microscope,SEM)表征结果可知,反应后细胞结构破碎,有机物和无机物均被释放减少;由X射线荧光光谱(X-ray fluorescence,XRF)可知,反应后金属元素含量增加;而GC-MS分析结果表明,水解后有机化合物的种类、含量均有减少。     

Fabrication and photoelectrocatalytic properties of nanocrystalline monoclinic BiVO4 thin-film electrode

Monoclinic bismuth vanadate(BiVO4) thin film was fabricated on indium-tin oxide glass from an amorphous heteronuclear complex via dip-coating.After annealation at 400,500,and 600°C,the thin films were characterized by X-ray diffraction,field emission scanning electron microscopy,X-ray photoelectron spectroscopy,and UV-Vis spectrophotometry.The BiVO4 particles on the ITO glass surface had a monoclinic structure.The UV-Visible diffuse reflection spectra showed the BiVO4 thin film had photoabsorption propertie...