废钢震荡盘整加剧 后期价格渐趋弱化

探讨了废钢行业目前面临的焦点问题,分析了2012年国内废钢消耗使用现状及价格走势,指出随着我国钢材市场供过于求局面的长期存在,2013年的废钢行情依然复杂多变。     

零价铁法处理含EDTA-Cu(Ⅱ)废水

为了探索含络合铜电镀废水的处理新方法,以废铁屑为材料,研究其去除EDTA-Cu(Ⅱ)的有效性和作用机制。对铁屑进行XRD表征的结果表明,铁屑中含有零价铁和少量碳,实验发现,铁屑对Cu(Ⅱ)和EDTA能同步去除,90 min的去除率分别达到93.51%,52.55%,且降低了体系的生物毒性,提高了生物降解性。对反应机制进行探讨,结果表明铁屑以直接还原、沉淀吸附和微电解作用实现对EDTA-Cu(Ⅱ)的有效去除。     

Aniline removal by Photocatalytic reaction of iron(iii) mediated with dissolved organic matter

When light (> 370 nm) was allowed to interact with an aqueous solution containing dissolved organic matter (DOM) and Fe(III), removal of aniline (AN) was observed. This was due to the photocatalytic reaction of Fe(III) mediated by DOM. Syringic acid (SYA) and humic acid (HA) were used as DOM in the present study. The ¹⁵N‐NMR spectrum of the product mixture from the light irradiation of the SYA/Fe(III) system demonstrated that AN was covalently bound to SYA. The kinetics of AN removal were, therefore, interpreted by assuming covalent binding between DOM and AN. The amounts of covalent binding sites and the apparent second‐order rate constants could be evaluated, and the amounts of covalent binding sites decreased with the increases of the concentration of DOM. This is attributed that the polymerization of DOM by the photo‐oxidation competed with the covalent binding between AN and DOM.     

ZVI强化厌氧处理高浓度颜料废水

通过向两相厌氧反应器产甲烷段添加零价铁,考察零价铁对厌氧产甲烷反应器(R1)处理颜料废水效果的强化作用。与未添加零价铁的传统产甲烷反应器(R2)相比,R1的COD去除率和甲烷产量分别提高了27%和53%。在进水负荷发生变化的情况下,R1的COD去除率仍保持在69%,而传统反应器只有31%.因此,R1具有良好的抗冲击负荷。     

钢铁企业经营困难废钢行情依然脆弱

结合国内外宏观经济形势走势，以及近日分别在中天、马钢举行的废钢网络信息会，对现阶段钢铁工业发展状况，包括钢材市场走势、废钢和冶金炉料行情以及废钢经营企业的处境等问题进行分析探讨。     

Investigation of a pyrophoric iron fire in a Visbreaker fractionation column provides better cleaning work procedure

An unexpected ignition of pyrophoric iron sulphide deposits took place in the fractionator of a Visbreaker unit. The distillation column had been chemically decontaminated prior to the event. The investigation of the event leads to conclusions concerning chemical decontamination limitations in vessels in coking service. Based on the lessons learned from this case, a prioritization of manual vessel cleaning works in coking service is proposed.     

利用零价铁去除挥发性氯代脂肪烃的试验

选用四氯乙烯(PCE)、三氯乙烯(TCF)与四氯化碳(CT)为靶污染物,研究不同组合下,零价铁系统对各污染物降解的有效性及反应进行的影响因素.结果表明:实验选用的废料生铁可有效去除水中的有机氯代脂肪烃类,尤其对氯代烷烃具有较强的降解功能,且反应符合准一级反应动力学方程;当PCE和TCE共存时,PCE和TCE的反应速率常数K分别为0.0624mL·(m²·h)^-1和0.0357mL·(m²·h),说明氯代程度高的PCE脱氯快;当CT和PCE共存时,二者的K分别为0.1341mL·(m2·h)^-1和0.0129mL·(m²·h)^-1,CT的脱氯快且彻底,说明氯代程度相同时烷烃的脱氯优于烯烃;无论是哪种氯代烃,单独存在时其反应的半衰期均短于与其它组分共存时.     

处理含铁尘泥的DRI工艺优选及废气污染防治

将高炉炼铁及炼钢时产生的含铁尘泥作为配料回用于烧结生产是目前较常使用的方法,但是这些尘泥之中的重金属Zn和Pb可能会对烧结和后续的高炉炼铁产生不良影响,通过对直接还原铁的工艺和设备进行综合对比,确定以转底炉为主要设备的煤基直接还原工艺较为适合处理炼铁及炼钢的含铁尘泥,并对转底炉工艺的原理及污染防治措施进行了讨论,最后提出了该工艺和钢铁联合企业之间的循环经济产业链。     

钢铁行业碳排放量核算方法的实证性研究

介绍了碳排放量核算的基本原理与通用方法。以某钢铁公司焦化厂CO2排放量计算为实例,对比分析了物料衡算法和经验计算法的合理性和准确性。研究发现,对于钢铁企业来说,采用IPCC方法进行CO2排放量的计算是可行的。     

江汉油田老二站提高水质达标率研究

江汉油田老二站采出水经典处理后回注,出水悬浮物、Fe2+和细菌均超标严重,水质达标率低.通过工艺调整,工艺前段利用SRB的除铁作用大幅度降低Fe2+含量;絮凝沉降阶段依据Fenton反应原理,借助H2O2的氧化除铁与杀菌作用,提高絮凝沉降效率,降低悬浮物含量;工艺末段选用多种杀菌剂交替杀菌.结果表明,工艺调整后以100 mg/L的H2O2代替原絮凝剂,间歇添加100 mg/L的杀菌剂Ⅱ,出水含铁1.5 mg/L、悬浮物3.0 mg/L、SRB 10个/mL,老二站水质达到注水水质标准要求,水质达标率达80％.