我国铜、铅和锌冶炼过程中危险废物产生与污染特性

我国有色金属冶炼行业工艺和反应多样,废物种类繁多,产生环节迥异,易出现此类危险废物管控过程中废物产生节点识别困难、废物指向不明确以及污染特性不清晰等问题,进而导致管理误判。通过梳理和分析《国家危险废物名录(2021年版)》规定的HW48大类中铜、铅、锌冶炼共22种废物的来源,以及铅滤饼和砷渣等重点废物的污染特性,明确废物指向,并提出完善我国有色金属冶炼危险废物管理的建议。     

The presence of zinc in Swedish waste fuels

Zinc (Zn) is a chemical element that has gained more attention lately owing to its possibility to form corrosive deposits in large boilers, such as Waste-to-Energy plants. Zn enters the boilers in many different forms and particularly in waste, the amount of Zn is hard to determine due to both the heterogeneity of waste in general but also due to the fact that little is yet published specifically about the Zn levels in waste. This study aimed to determine the Zn in Swedish waste fuels by taking regular samples from seven different and geographically separate waste combustion plants over a 12-month period. The analysis shows that there is a relation between the municipal solid waste (MSW) content and the Zn-content; high MSW-content gives lower Zn-content. This means that waste combustion plants with a higher share of industrial and commercial waste and/or building and demolition waste would have a higher share of Zn in the fuel. The study also shows that in Sweden, the geographic location of the plant does not have any effect on the Zn-content. Furthermore, it is concluded that different seasons appear not to affect the Zn concentrations significantly. In some plants there was a clear correlation between the Zn-content and the content of other trace metals.     

袋式除尘器在蒸气干燥机烟气净化中的应用

介绍了铜冶炼蒸气干燥机高浓度粉尘的特点,总结了应用低压脉冲布袋除尘器治理铜冶炼蒸气干燥机高浓度粉尘烟气的成功经验,通过合理设计袋式除尘器各系统,可保证铜冶炼蒸气干燥机废气达标排放。     

Systematic control technologies for gaseous pollutants from non-ferrous metallurgy

Air pollutant emissions represent a critical challenge in the green development of the non-ferrous metallurgy industry.This work studied the emission characteristics,formation mechanisms,phase transformation and separation of typical air pollutants,such as heavy metal particles,mercury,sulfur oxides and fluoride,during non-ferrous smelting.A series of purification technologies,including optimization of the furnace throat and hightemperature discharge,were developed to collaboratively control and...     

The transport of Cu and Zn from agricultural soils to surface water in a small catchment

Long-term manure-borne copper and zinc inputs (18-324 mg Cu m⁻² yr⁻¹ and 100-800 mg Zn m⁻² yr⁻¹) to grassland soils resulted in their catchment in water concentrations that often exceeded the surface water quality criteria (2 μg Cu l⁻¹ and 5 μg Zn l⁻¹). This paper compares retention and release of Cu and Zn by two types of soil, a mineral soil (MS) and a dark colored soil rich in organic matter (OS). On the basis of dry soil mass, the OS has a higher retention/affinity for Cu and Zn than the MS, but much less Zn accumulated in the MS when compared on an areal basis. This is largely because of the much smaller bulk OS density and larger dissolved metal concentrations in the OS drainage than that for the MS. However, because of the greater water retention capacity of the OS, elevated metal concentrations in the soil solution do not necessarily cause greater loss to water. It is concluded that artificially drained OS can contribute significantly to the observed elevated Cu and Zn concentrations of the river, especially during relatively dry weather conditions when the contribution of water seeping from OS to the total river water discharge becomes increasingly important.     

Soft and sour: The challenge of setting environmental quality standards for bioavailable metal concentration in Fennoscandinavian freshwaters

The European Union Water Framework Directive (WFD) requires member states to ensure that all inland and coastal waters achieve ‘good’ water quality status. To this end, the WFD has set environmental quality standards (EQS) or Water quality criteria (WQC) for priority pollutants that include the four metals Cd, Ni, Pb and Hg. Many states have also chosen to set EQS for Cu and Zn. The use of bioavailability models to set EQS, paves the way for accepting higher local metal concentrations in waters where metal bioavailability is deemed low. The Biotic Ligand Model (BLM) concept has been proposed as a tool for estimating metal bioavailability and for calculating local EQS in the EU guidance document. The BLM estimates metal bioavailability based on the dissolved metal concentration and key ancillary water chemistry parameters (acidity, hardness and organic carbon content). The BLMs developed so far, have only been validated for water chemistry input parameters typical of Central Europe. However, the pH, alkalinity and dissolved organic carbon levels of a significant fraction of Fennoscandinavian (Finland, Norway and Sweden) freshwaters are outside the calibration range of currently available BLMs. The levels of Ca²⁺, alkalinity and pH in 75%, 29% and 22%, respectively, of the ca. 2500 Fennoscandinavian freshwater bodies investigated in this survey were outside the calibration range of tested BLMs. Moreover, a comparison of the ability of the tested BLMs to predict the acute and chronic copper toxicity to Daphnia magna and Rainbow trout indicated that the BLMs should be used with caution outside their current validation range. We conclude that more work is needed to extend the application of BLMs in the practical risk assessment to encompass a broader range of European freshwater bodies.     

关中西部某铅锌冶炼区周边土壤重金属污染特征与生态风险评价

以关中西部某铅锌冶炼区周边土壤为研究对象,采用潜在生态危害指数法对冶炼厂周边土壤的重金属污染特征和潜在生态风险进行了研究。结果表明:某铅锌冶炼区周边土壤中Pb、Zn、Cu、Cd、Cr、Hg、As、Ni的平均含量均高于陕西省土壤元素背景值。除Cr元素以外,其余7种重金属元素存在两两之间的极显著或显著的相关性。土壤中重金属污染物总的潜在生态风险指数为轻微生态风险。因此该铅锌冶炼区周边土壤存在不同程度复合污染组合类型,生态风险总体水平较低,但局部有中重度污染。     

某有色冶炼企业周围土壤中汞等重金属分布的特征研究

为考察某有色金属冶炼厂对其周边土壤的重金属污染状况,研究了土壤中汞等重金属的水平分布特征和垂直分布特征。在该厂的厂内、上风向、下风向区域分别进行代表性布点,同时在当地主导风向下风侧最大落地点400 m~2范围内进行棋盘式布点,分层采样,共计96个样品,以GB 15618—2008《土壤环境质量标准》的三级标准为评价标准,对土壤中汞、铅、砷、锌的污染状况及分布特征进行了分析评价。结果表明:厂内土壤汞浓度为355 mg/kg,超出标准限值1.5 mg/kg约239倍;土壤重金属水平分布特征随当地主导风向影响较为明显,而重金属垂直分布特征各异,汞浓度随土层深度增加而升高,砷浓度垂直分布较均匀,锌浓度的垂直分布特征不明显。     

Combined effects of adsorption and photocatalysis by hybrid TiO2/ZnO-calcium alginate beads for the removal of copper

The use of nanosized titanium dioxide(TiO_2) and zinc oxide(ZnO) in the suspension form during treatment makes the recovering and recycling of photocatalysts difficult.Hence,supported photocatalysts are preferred for practical water treatment applications.This study was conducted to investigate the efficiency of calcium alginate(CaAlg) beads that were immobilized with hybrid photocatalysts,TiO_2/ZnO to form TiO_2/ZnO-CaAlg.These immobilized beads,with three different mass ratios of TiO_2:ZnO(1:1,1:2,and 2:1) were used to remove Cu(Ⅱ) in aqueous solutions in the presence of ultraviolet light.These beads were subjected to three cycles of photocatalytic treatment with different initial Cu(Ⅱ) concentrations(10-80 ppm).EDX spectra have confirmed the inclusion of Ti and Zn on the surface of the CaAlg beads.Meanwhile,the surface morphology of the beads as determined using SEM,has indicated differences of before and after the photocatalytic treatment of Cu(Ⅱ).Among all three,the equivalent mass ratio TiO_2/ZnO-CaAlg beads have shown the best performance in removing Cu(Ⅱ) during all three recycling experiments.Those TiO_2/ZnO-CaAlg beads have also shown consistent removal of Cu,ranging from 7.14-52.0 ppm(first cycle) for initial concentrations of10-80 ppm.In comparison,bare CaAlg was only able to remove 6.9-48 ppm of similar initial Cu concentrations.Thus,the potential use of TiO_2/ZnO-CaAlg beads as environmentally friendly composite material can be further extended for heavy metal removal from contaminated water.     

基于响应面法的改性玉米芯吸附水中Zn~(2+)的工艺条件优化及机理研究

运用玉米芯作为生物吸附剂去除水溶液中Zn~(2+)。以单因素控制变量法考察了玉米芯用量、吸附时间、改性盐浓度和摇床转速对吸附性能的影响,并运用响应面法对吸附条件进行优化,通过吸附等温线、吸附动力学和热力学研究来探讨吸附机理。结果表明,当Zn~(2+)初始浓度为50 mg/L、改性盐浓度为0.26%、玉米芯用量为20 g/L、转速为203 r/min,于30℃的恒温振荡器中振荡吸附反应35 min后,吸附率可达80.40%。玉米芯对水溶液中Zn~(2+)的吸附是一个自发的吸附过程,其吸附行为符合二级反应速率方程和Langmuir吸附等温式,具有一定的应用前景。