浅谈再生资源产业发展

随着改革开放进一步扩大和经济建设的持续快速发展,我国再生资源回收利用事业得到了较快发展。但是,再生资源产业存在着市场混乱、法律政策不完善及综合利用水平低等问题。通过对我国再生资源现状分析对我国再生资源产业发展作了展望。     

河流生态用水综合评价

为完善河流生态用水综合评价,从水循环中河流生态用水角度出发,以河流水量收支平衡规律为理论基础,考虑河流本底水质,采用本底水质、排放水质和河流控制目标污染物浓度表达河流生态新污径比,并推导出污水排放允许极限值,深入探讨了河流生态用水的质与量综合评价,改进了二元循环下河流生态用水的水量水质计算方法和河流生态用水的综合评价新标准,进一步完善了河流生态用水质与量综合评价模型。用此模型对黄河2002～2005年为例进行实力分析,结果表明：①在污水一级达标排放和不调水情况下,黄河生态用水水量比例在335%～545%,在Tennant等级中为较好状态,但水质不满足要求,bo>Blim;②在污水深度处理达到95 mg/L（COD）,不调水情况下,黄河生态用水质与量满足生态环境需水要求,综合评价合格;③在污水一级达标排放和南水北调调水40亿m3情况下,黄河生态用水水量比例有较大提高,综合评价合格。这说明,黄河生态用水问题不仅是水量短缺,而且水质问题更加严重。     

Runoff variation affected by precipitation change and human activity in Hailiutu River basin,China

For recent years, runoff generation and hydrological processes in Hailiutu River basin have been greatly changed by climate change and human activity, especially water and soil conservation construction. In this study, the trends in precipitation, evapotranspiration (ET) and river runoff as well as the effects of precipitation change and human activity on runoff variation have been studied. The results showed that during 1960–2000, annual precipitation and river runoff, monthly precipitation and ET in September and October as well as monthly runoff in all months showed a significant decrease. In addition, peak flow and base flow had a large decrease. Under the joint influence of precipitation change and human activity, the mean annual runoff decreased by 35 million m³ from the baseline period (1960–1985) to the change period (1986–2000), which accounted for 60.9% and 39.1% of the total runoff decrease, respectively. Precipitation change played a primary role in the decrease of annual runoff whereas human activity, particularly water and soil conservation construction, also had remarkable impacts on runoff variation.     

Resources and international climate change policy gridlock

Few other policy zones are as complex as the issue of climate change. If the more pessimistic projections of climate change doom are correct, then the failure to address the issue is likely to be catastrophic and irreversible. The Inter-governmental Panel on Climate Change has predicted the potential extinction of many species and that the existence of small-island and other vulnerable countries will be threatened if business-as-usual greenhouse gas emissions continue. Climate change is a transboundary problem and requires unprecedented levels of cooperation between states and serious and sustained responses from major emitters. However, the growing demand and consumption of natural resources for continued energy security and cornucopian economic growth have undermined the outcomes of international climate change negotiations. It is argued here that there is a strong connection between the major emitters’ positions at United Nations’ climate talks, their possessions, dependence and consumption of natural resources, and the continued undermining of international climate change policy for unsustainable growth. This paper assesses the resource politics of the US, China, India, Canada, Russia, and Saudi Arabia and their positions at climate talks to show the link between lack of climate change policy progress and the positions of these main players.     

Strategic Framing of Climate Change by Industry Actors: A Meta-analysis

This study uses framing theory to analyze 38 studies on industry actors' climate change communication between 1990 and 2010. It identifies three consecutive phases, each characterized by one dominant master frame: in the early and mid-1990s the US fossil fuel and coal industry pushed the frame of scientific uncertainty. With the rundown to the Kyoto negotiations in 1997, the strategy shifted toward the socioeconomic consequences of mandatory emission reductions, particularly in the USA and Australia. At the same time, European industry actors started to promote industrial leadership in a climate protection, which today dominates across all the world regions. The study discusses potential triggers for the regional differences as well as the implications for further research.     

The Voice of Science on Climate Change in the Mainstream Turkish Press

This study aims to explore how the Turkish press represents the discourse of climate change scientists. This is achieved by analyzing climate change-related articles that quote scientists, directly and indirectly, in two Turkish mainstream newspapers (N = 132, 7 years). The Turkish case illustrates how scientific rhetoric is used for presenting climate change as a matter of concern in an industrializing country. The analysis suggests that climate science is portrayed as an un-discussed authority. News articles rely on data about the disturbance of species and the state of the natural environment to provide proof of global warming, by which they produce an implicit moral imperative. The articles also portray the worst threats and challenges—those pertaining to human society—as residing mostly in the future. We conclude by discussing the implications of the use of a projected future to convey a discourse emphasizing the alarming risks associated with climate change.     

How Aware Are Other Nations of Climate Change? Analyzing Germans’ Second-Order Climate Change Beliefs About Chinese,US American and German People

ABSTRACT

What people believe about the beliefs of other people – second-order beliefs – has been acknowledged as a key factor that shapes public support for international climate policy. However, very little is known about their origins. Based on data from an online survey (n?=?935), we analyzed how German citizens assess the climate change awareness in their own nation as compared to those of the US and China. Even if the public climate change awareness in the US and China factually differs, we found that German citizens equivalently rate both nations similar and much lower than their own, a finding which can be explained with social identity processes and “in-group”/“out-group” biases. Hierarchical regression analyses demonstrate that the attention individuals pay towards television and social media predict second-order beliefs on climate change awareness positively, while attention to print media is a negative predictor.     

Multiobjective optimisation method for life-cycle design of mechanical products

Manufacturing that minimises the exhaustion of natural resources, energy used and deleterious environmental impact is increasingly demanded by societies that seek to protect global environments as much as possible. To achieve this, life-cycle design (LCD) is an essential component of product design scenarios; however, LCD approaches have not been well integrated in optimal design methods that support quantitative decision-making. This study presents a method that yields quantitative solutions through optimisation analysis of a basic product design incorporating life-cycle considerations. We consider two types of optimisation approaches that have different aims, namely, (1) to reduce the use of raw materials and energy consumption and (2) to facilitate the reuse of the product or its parts when it reaches the end of its useful life. We also focus on how the optimisation results differ according to the approach used, from the viewpoint of the 3R concept (Reduce, Reuse and Recycling). Our method obtains optimum solutions by evaluating objectives fitted to each of these two optimisation approaches with respect to the product's life-cycle stages, which are manufacturing, use, maintenance, disposal, reuse and recycling. As an applied example, a simple linear robot model is presented, and Pareto optimum solutions are obtained for the multiobjective optimisation problem whose evaluated objectives are the operating accuracy of the robot and the different life-cycle costs for the two approaches. The characteristics of the evaluated objectives and design variables, as well as the effects of using material characteristics as design parameters, are also examined.     

Decision support for sustainable manufacturing using decision guidance query language

Sustainability has become a very significant research topic as it impacts many different manufacturing industries. Therefore, the technologies for monitoring, analysing, evaluating and optimising the sustainability performance of manufacturing processes and systems are very critical for decision makers on the shop floor. This paper introduces a decision guidance management system that provides actionable recommendations through quantitative analysis of the sustainability measures of manufacturing processes and systems based on life cycle assessment. The system determines decision preferences through dynamically collected data and decision makers' responses, taking into account the prevailing constraints. Optimal decisions can be derived using mathematical and constraint programming. By using decision guidance query language, this methodology allows users to make optimal decisions without an extensive mathematical or operations research background. Knowledge of relational databases is sufficient for a user to formulate the optimisation problem and obtain optimal solutions. The methodology is demonstrated with a machining operation case study, in which a list of sustainability metrics are identified and sustainability modelling methods are proposed. Important sustainable machining performance measures are optimised, resulting in actionable recommendations.     

SME application of LCA‐based carbon footprints

Following a brief introduction about the need for businesses to respond to climate change, this paper considers the development of the phrase ‘carbon footprint’. Widely used definitions are considered before the authors offer their own interpretation of how the term should be used. The paper focuses on the contribution small and medium sized enterprises (SMEs) make to the economy and their level of influence in stimulating change within organisations. The experience of an outreach team from the Engineering Department of a UK university is used which draws on the experience of delivering regional economic growth projects funded principally through the European Regional Development Fund. Case studies are used including the development of bespoke carbon footprints for SMEs from an initiative delivered by the outreach team. Limitations of current carbon footprints are identified based on this higher education‐industry knowledge exchange mechanism around three main themes of scope, the assessment method and conversion factors. Evidence and discussions are presented that conclude with the presentation of some solutions based on the work undertaken with SMEs and a discussion on the merits of the two principally used methodologies: life‐cycle analysis and economic input–output assessment.