Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.     

Can we gain precision by sampling with probabilities proportional to size in surveying recent landscape changes in the Netherlands?

Seventy-two squares of 100 ha were selected by stratified random sampling with probabilities proportional to size (pps) to survey landscape changes in the period 1996–2003. The area of the plots times the urbanization pressure was used as a size measure. The central question of this study is whether the sampling with probabilities proportional to size leads to gain in precision compared to equal probability sampling. On average 1.03 isolated buildings per 100 ha have been built, while 0.90 buildings per 100 ha have been removed, leading to a net change of 0.13 building per 100 ha. The area with unspoiled natural relief has been reduced by 2.3 ha per 100 ha, and the length of linear relicts by 137 m per 100 ha. On average 74 m of linear green elements have been planted per 100 ha, while 106 m have been removed, leading to a net change of −31 m per 100 ha. For the state variables ‘unspoiled natural relief', ‘ linear relicts', ‘removed linear green elements', and ‘new – removed linear green elements' there is a gain in precision due to the pps-sampling. For the remaining state variables there is no gain or even a loss of precision (`new buildings', ‘removed buildings', ‘new – removed buildings', ‘new linear green elements'). Therefore, if many state variables must be monitored or when interest is not only in the change but also in the current totals, we recommend to keep things simple, and to select plots with equal probability.     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Forecasting China’s primary energy demand based on an improved AI model

An improved energy demand forecasting model is built based on the autoregressive distributed lag (ARDL) bounds testing approach and an adaptive genetic algorithm (AGA) to obtain credible energy demand forecasting results. The ARDL bounds analysis is first employed to select the appropriate input variables of the energy demand model. After the existence of a cointegration relationship in the model is confirmed, the AGA is then employed to optimize the coefficients of both linear and quadratic forms with gross domestic product, economic structure, urbanization, and technological progress as the input variables. On the basis of historical annual data from 1985 to 2015, the simulation results indicate that the proposed model has greater accuracy and reliability than conventional optimization methods. The predicted results of the proposed model also demonstrate that China will demand approximately 4.9, 5.6, and 6.1 billion standard tons of coal equivalent in 2020, 2025, and 2030, respectively.     

罗布泊野骆驼国家级自然保护区野骆驼的栖息环境及适应特征

野骆驼是世界上骆驼科真驼属唯存的野生种,目前全世界只分布在我国新疆和蒙古国的中蒙边境地区,在世界上仅存730~880头左右,是比大熊猫更为珍稀的野生动物,濒临灭绝。野骆驼的生存环境非常恶劣,气候十分干旱,荒漠化十分严重,蒸发量远远大于降雨量,空气非常干燥,日夜温差极大。分布区的植物也非常稀少,没有淡水,只有零星散布的又苦又咸的盐泉,大部分地区寸草不生,只有在盐泉附近长着稀稀拉拉的盐生草、沙拐枣、骆驼刺等。野骆驼能在严酷的荒漠半荒漠地区生活,对恶劣气候环境有很强的适应性,具有耐饥渴抗风暴等抵抗恶劣环境的能力,是动物界中任何一种动物无可比拟的。     

Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery1

Claggett, Peter R., Judy A. Okay, and Stephen V. Stehman, 2010. Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery. Journal of the American Water Resources Association (JAWRA) 46(2):334-343. DOI: 10.1111/j.1752-1688.2010.00424.x Abstract: The Chesapeake Bay watershed encompasses 165,760 km² of land area with 464,098 km of rivers and streams. As part of the Chesapeake Bay restoration effort, state and federal partners have committed to restoring 26,000 miles (41,843 km) of riparian forest buffers. Monitoring trends in riparian forest buffers over large areas is necessary to evaluate the efficacy of these restoration efforts. A sampling approach for estimating change in riparian forest cover from 1993/1994 to 2005 was developed and implemented in Anne Arundel County, Maryland, to exemplify a method that could be applied throughout the Bay watershed. All stream reaches in the county were stratified using forest cover change derived from Landsat imagery. A stratified random sample of 219 reaches was selected and forest cover change within the riparian buffer of each sampled reach was interpreted from high-resolution aerial photography. The estimated footprint of gross change in riparian forest cover (i.e., the sum of gross gain and gross loss) for the county was 1.83% (SE = 0.22%). Stratified sampling taking advantage of a priori knowledge of locations of change proved to be a practical and efficient protocol for estimating riparian forest buffer change at the county scale and the protocol would readily extend to much broader scale monitoring.     

Chemical composition of burnt smell caused by accidental fires: environmental contaminants

The chemical composition of the odors typical of fires has recently been deciphered. Basically the constituents are mixtures of acetophenone, benzyl alcohol, hydroxylated derivatives of benzaldehyde, methoxylated and/or alkylated phenols and naphthalene. This finding makes it possible to develop objective, practical analytic measurement methods for the burnt smell as a contribution to improving fire damage assessment and remediation monitoring. With the aid of an artificially produced burnt smell and a panel of testers the odor detection threshold of a test mixture was determined olfactometrically to 2 μg m⁻³. Using a defined burnt-smell atmosphere in a test chamber, analytical methods with active sampling, the adsorbents XAD 7 and TENAX TA, and GC/MS measurement were then optimized and tested with a view to being able to carry out sensitive quantitative measurement of burnt smells. A further practical method with particular application to the qualitative characterization of this odor is based on the use of a new SPME (solid-phase microextraction) field sampler with DVB/CAR/PDMS (divinylbenzene/Carboxen™/polydimethylsiloxane) fibers.     

基于适应性管理的水污染控制体系构建——以太湖流域为例

从规划内容与目标、规划方法及方案实施和评估3方面对太湖近20年水污染物控制历程进行综合分析,认为太湖水污染物控制正处面源污染、生活污染及新型污染问题凸显且更难处理,更为广泛的利益相关者和科研队伍积极参与的转型期.这种变化将导致污染治理面临更难应付的动态性和复杂性,使得当前以环境容量为总量为指导通过自上而下分配排污量和削减量的控制方案面临极大挑战.结合太湖水污染现状,通过与现行治理方法在管理假设、适合对象、协调管理手段、管理目标、规划方法、公众参与程度以及规划的优劣势等方面的比较发现,适应性管理可以积极有效应对由于环境趋势和管理协调对象变化所带来的系统不确定性和复杂性,将是一个积极有效的补充方法.同时,本文基于适应性管理提出了太湖水环境污染物排放控制体系的构建框架,突出适应性管理平台、科学研究及公众与基层单位参与在污染物控制中的重要作用.     

Mobile passive samplers: concept for a novel mode of exposure

Integrative passive sampling with devices such as semipermeable membrane devices generally relies on rigs for month-long static exposures in water. We evaluate here whether mobile exposures of passive samplers can provide reliable estimates of dissolved contaminant concentrations. Mobile exposures were obtained by towing samplers fastened to the end of a benthic trawl net. Significant and reproducible absorption of polycyclic aromatic hydrocarbons during 5 h-long deployments was made possible by high sampling rates resulting from high water turbulences during towing at 1.2-1.5 knots. Sampling rates (72-215 L d⁻¹) estimated from the dissipation of performance reference compounds were supported by in situ calibration with samplers exposed for a 30 days in the vicinity of the test site. Higher fluoranthene and pyrene absorption in samplers exposed to the trawling-induced sediment plume could be attributed to desorption from re-suspended sediments. This mode of exposure has the potential to be used in monitoring programmes.