Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174. 相似文献
Environmental appearance of Q1, a natural heptachloro compound with the molecular formula C9H3Cl7N2, was studied in samples from different sites all over the world. Q1 was expected to have a bipyrrole backbone, similar to other compounds ascribed to natural sources. A method for isolation of Q1 was developed by combination of adsorption chromatography on silica and normal phase HPLC with an amino phase. UV-detection of Q1 supports the aromatic character of the compound.
The high levels detected in samples of marine mammals and birds suggested that Q1 is both a persistent and a bioaccumulative contaminant. This was underscored by calculated log KOW in the range of other lipophilic organohalogens. In accordance with earlier studies, highest Q1 concentrations were found in the Southern Hemisphere, but with a highly selective GC/ECNI-MS-SIM method, detection of Q1 was also achieved in many samples from the Northern Hemisphere. In addition to marine mammals and birds, Q1 was also detected in fish from the Mediterranean Sea and the Antarctic. Traces were also detected in SRM 1588 certified cod liver oil, but Q1 was not detected in fish from Hong Kong and Lake Baikal. 相似文献
The aerobic visible-light-photosensitised irradiation of methanolic solutions of either of the phenolic-type contaminants model compounds (ArOH) p-phenylphenol (PP), p-nitrophenol (NP) and phenol (Ph), and for two additional phenolic derivatives, namely p-chlorophenol (ClP) and p-methoxyphenol (MeOP), used in some experiments, was carried out. Employing the natural pigment riboflavin (Rf) as a sensitiser, the degradation of both the ArOH and the very sensitiser was observed. A complex mechanism, common for all the ArOH studied, operates. It involves superoxide radical anion (O2√−) and singlet molecular oxygen (O2(1Δg)) reactions. Maintaining Rf in sensitising concentrations levels (≈0.02 mM), the mechanism is highly dependent on the concentration of the ArOH. Kinetic experiments of oxygen and substrate consumption, static fluorescence, laser flash photolysis and time-resolved phosophorescence detection of O2(1Δg) demonstrate that at ArOH concentrations in the order of 10 mM, no chemical transformation occurs due to the complete quenching of Rf singlet excited state. When ArOH is present in concentrations in the order of mM or lower, O2√− is generated from the corresponding Rf radical anion, which is produced by electron transfer reaction from the ArOH to triplet excited Rf. The determined reaction rate constants for this step show a fairly good correlation with the electron-donor capabilities for Ph, PP, NP, ClP and MeOP. In this context, the main oxidative species is O2√−, since O2(1Δg) is quenched in an exclusive physical fashion by the ArOH. The production of O2√− regenerates Rf impeding the total degradation of the sensitiser. This kinetic scheme could partially model the fate of ArOH in aquatic media containing natural photosensitisers, under environmental conditions. 相似文献
GOAL, SCOPE AND BACKGROUND: Sweden is meeting prohibition for deposition of organic waste from 2005. Since 1 million tons of sludge is produced every year in Sweden and the capacity for incineration does not fill the demands, other methods of sludge management have to be introduced to a higher degree. Two biological treatment alternatives are anaerobic digestion and composting. Different oxygen concentrations result in different microbial degradation pathways and, consequently, in a different quality of the digestion or composting residue, It is therefore necessary to study sludge treatment during different oxygen regimes in order to follow both degradation of compounds and change in toxicity. In this study, an industrial sludge containing explosives and pharmaceutical residues was treated with anaerobic digestion or composting, and the change in toxicity was studied. Nitroaromatic compounds, which are the main ingredients of both pharmaceutical and explosives, are well known to cause cytotoxicity and genotoxicity. However, little data are available concerning sludge with nitroaromatics and any associated dioxin-like activity. Therefore, we studied the sludge before and after the treatments in order to detect any changes in levels of Ah receptor (AhR) agonists using two bioassays for dioxin-like compounds. METHODS: An industrial sludge was treated with anaerobic digestion or composting in small reactors in a semi-continuous manner. The same volume as the feeding volume was taken out daily and stored at -20 degrees C. Sample preparation for the bioassays was done by extraction using organic solvents, followed by clean up with silica gel or sulphuric acid, yielding two fractions. The fractions were dissolved in DMSO and tested in the bioassays. The dioxin-like activity was measured using the DR-CALUX assay with transfected H4IIE rat hepatoma pGudluc cells and an EROD induction assay with RTL-W1 rainbow trout liver cells. RESULTS AND DISCUSSION: The bioassays showed that the sludge contained AhR agonists at levels of TCDD equivalents (TEQs) higher than other sludge types in Sweden. In addition, the TEQ values for the acid resistant fractions increased considerably after anaerobic digestion, resulting in an apparent formation of acid resistant TEQs in the anaerobic reactors. Similar results have been reported from studies of fermented household waste. There was a large difference in effects between the two bioassays, with higher TEQ levels in the RTL-W1 EROD assay than in the DR-CALUX assay. This is possibly due to a more rapid metabolism in rat hepatocytes than in trout hepatocytes or to differences in sensitivities for the AhR agonists in the sludge. It was also demonstrated by GC/FID analysis that the sludge contained high concentrations of nitroaromatics. It is suggested that nitroaromatic metabolites, such as aromatic amines and nitroanilines, are possible candidates for the observed bioassay effects. It was also found that the AhR agonists in the sludge samples were volatile. CONCLUSIONS: The sludge contained fairly high concentrations of volatile AhR agonists. The increase of acid resistant AhR agonist after anaerobic digestion warrants further investigations of the chemical and toxic properties of these compounds and of the mechanisms behind this observation. RECOMMENDATION AND OUTLOOK: This study has pointed out the benefits of using different types of mechanism-specific bioassays when evaluating the change in toxicity by sludge treatment, in which measurement of dioxin-like activity can be a valuable tool. In order to study the recalcitrant properties of the compounds in the sludge using the DR-CALUX assay, the exposure time can be varied between 6 and 24 hours. The properties of the acid-resistant AhR agonists formed in the anaerobic treatment have to be investigated in order to choose the most appropriate method for sludge management. 相似文献
The toxicity of seawater dispersions of a chemical dispersant to two marine crustaceans was investigated in the presence and absence of various quantities of a non-toxic mineral oil. From the results and a physical-chemical partitioning analysis, a limiting value of the oil-water partition coefficient of the toxic compounds is deduced suggesting that essentially all of the toxic compounds in the dispersant will partition into solution in water following dispersant application to an oil spill. This conclusion simplifies interpretation and prediction of the toxic effects of a dispersed oil spill.The combined bioassay-partitioning procedure may have applications to the study of the toxicity of other complex mixtures such as industrial effluents. 相似文献
The degradation of a common textile dye, Reactive-brilliant red X-3B, by several advanced oxidation technologies was studied in an air-saturated aqueous solution. The dye was resistant to the UV illumination (wavelength λ 320 nm), but was decolorized when one of Fe3+, H2O2 and TiO2 components was present. The decolorization rate was observed to be quite different for each system, and the relative order evaluated under comparable conditions followed the order of Fe2+–H2O2–UV Fe2+–H2O2 > Fe3+–H2O2–UV > Fe3+–H2O2 > Fe3+–TiO2–UV > TiO2–UV > Fe3+–UV > TiO2–visible light (λ 450 nm) > H2O2–UV > Fe2+–UV. The mechanism for each process is discussed, and linked together for understanding the observed differences in reactivity. 相似文献
Zusammenfassung Reifen-, Ru?-, Motoren?l-, Asphalt-, Plastik- und Lackproben aus dem Stra?enverkehr wurden auf ihre Kohlenstoff- und Schwefel-isotopenverh?ltnisse
mit dem Ziel untersucht, die Frage zu beant-worten, ob diese Isotopenverh?ltnisse als Indikatoren für die Belastungssituation
und die Schadstoffquellen bei der Untersuchung von stra?ennahen B?den eingesetzt werden k?nnen. Die δ11C-Werte der technischen Substrate lagen zwischen-30‰ und-18‰ relativ zum PDB-Standard, Dabei zeigte sich aufgrund der unterschiedlichen
Herstellungsverfahren eine deutliche Abgrenzung der Substrate untereinander. Asphalt hatte Werte zwischen-23 und-18‰, Ru?
zwischen -27 und -22‰ Die Ru?proben unterschieden sich je nach Art des verwendeten Kraftstoffs. Plastik, Lack und Motor?le
zeigten ?hnliche δ13C-Werte, die zwischen-30 und-27‰ lagen. Reifen haben relativ konstante δ13C-Werte um -26‰ Der Einflu? des Stra?enverkehrs auf die δ13C-Werte im Stra?ensediment und in stra?ennahen B?den konnte anhand verschiedener Kohlenstoffspezies an einem Transekt an einer
Landstra?e aufgezeigt werden. Ein Vergleich mit verkehrstypischen Schwermetallemissionen ergab bei einzelnen Kohlenstoffspezies
einen ?hnlichen Verlauf der Schwermetallkonzentrationen und der δ13C-Werte.
Die δ34S-Werte lagen zwischen -6 und +8‰ relativ zum CDT-Standard. Eine Abgrenzung der Substrate in ihren δ14S-Werten war hierbei nicht m?glich.
相似文献