Estimation of Cumulative Frequency Distribution for Carbon Monoxide Concentration from Wind-Speed Data, in Buenos Aires (Argentina)

In this article we apply and test a methodology to estimate cumulative frequency distribution for air pollutant concentration from wind-speed data. We use the inverse relationship after Simpson et al. (Atmospheric Environment, 19, 75–82, 1985) between the opposing percentile values in the statistical distributions for air pollutant concentrations and wind-speed data. This relationship is valid, irrespective of the statistical distributions of both variables, if an inverse relationship between them is also applicable. The available data are five years of 8-h average carbon monoxide concentration and 8-h mean wind-speed, observed in Buenos Aires (Argentina). The performance of the obtained empirical expressions in estimating cumulative frequency distributions for 8-h CO is statistically evaluated. The results show that it is possible to obtain an acceptable cumulative frequency distribution for 8-h CO concentration at the site if the cumulative frequency distribution for wind-speed is known. Q–Q plots show a good agreement between estimated and observed values. From our data, the mean relative error of the estimations was found to be as much as 8.0%.     

Potential and Shortcomings of Numerical Weather Prediction Models in Providing Meteorological Data for Urban Air Pollution Forecasting

The last decade progress in numericalweather prediction (NWP) modelling and studies of urbanatmospheric processes for providing meteorological data forurban air pollution forecasting is analysed on examples ofseveral European meteorological centres. Modern nested NWP models are utilising land-use databasesdown to 1 km resolution or finer, and are approaching thenecessary horizontal and vertical resolution suitable forcity scale. The recent scientific developments in the fieldof urban atmospheric physics and the growing availabilityof high-resolution urban surface characteristics datapromise further improvements of the capability of NWPmodels for this aim. A strategy to improve NWP data forthe urban air pollution forecasting is suggested.     

Integrated Assessment of Air Pollution Abatement Strategies in Urban Areas: Application to the Greater Athens Area

This paper presents an integrated system for the assessmentof technical and non-technical measures that are putforward in order to reduce air pollution levels in urbanareas. In contrast to the majority of the currentlyemployed assessment tools, this system allows for theevaluation of any proposed air pollution control measure interms of its combined impact on air quality and socialwelfare, by correlating the environmental and economicaspects of alternative air pollution abatement solutions.Based on the multi-pollutant, multi-effect concept, thesystem presented aims in providing policy-makers with areliable tool for the objective assessment of the mostcost-effective packages of measures, the latter beingallocated according to the particular features and needs ofthe areas examined.     

CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.     

CAF涡凹气浮处理含油废水的中试试验研究

针对石化公司污水成分复杂,COD和油含量较高,还含有较多的硫化物、挥发酚和氨氮(NH3-N)等情况,选用一种新型的气浮设备CAF涡凹气浮系统对该含油废水进行了预处理中试试验。试验结果表明CAF处理石化含油废水效果明显,气浮处理效果好,出水油在10 mg/L以下,去除率高达95%,且CAF气浮的电耗小、占地面积小、操作管理和维修非常简便。采用CAF设备,占地面积可节省70%～80%,每年可节约电费50～60万元(按1000 m3/h,0.8元/kW·h),操作使用也极其简单,具有可观的经济效益。     

Air Pollution Effects on Forest Trees in Balikesir,Turkey

Air pollution has become an actual problem in Balikesir because of rapid urbanisation and increasing of the polluting sources. Air pollutionproblems occur under the unfavorable meteorological conditions which increase in frequency of occurrence in winter due to use of low quality lignite coals for heating. The `Protection of Air Quality' in Turkey dated 1986 is based on the human health criteria. But the critical limit values are lethal for the forest trees as far as SO₂ is concerned. The field observations showed that leaves of the trees have yellow spots indicating acid burns in Balikesir. This study aims at determining the relationships between the SO₂ concentrationsin the air under selected climatic conditions, and the effects of air pollution on forest trees in Balikesir. Samples of leaves were collected from the City Parks in Balikesir, Deirmenboaz forested area located 10 km far fromBalikesiron the Balikesir-Bursa highway, and from the forestation areas near the Balikesir-Edremit highway. Sulfur contents of the leaves were very high especially in the city (2650–5300 g m^-3).Samples from other areas had values lower than this range but above the usual values (850–3612 g m^-3). The diameter increments of the trees were found to be lower and these results clearly showed the adverse impacts. Negative correlations were found between these sulfur concentrations and the daily mean temperatures and wind speeds. Positive correlation was seen between these concentrations and pressures, humidities. Emission sources must be controlled in order to safeguard the forests which protects the soil, facilitate water production, assimilate carbon dioxide in air and produce oxygen. It must be considered that the problems are not only regional but have a global identity.     

Numerical Prediction of Dispersion Characteristics in an Urban Area Based on Grid Refinement and Various Turbulence Models

A detailed simulation of the Goettinger Strasse pollutantdispersion problem is performed using the CFD code CFX-TASCflow for different wind directions. Two turbulencemodels, the k- and the RSM are adopted on three gridrefinement levels. Besides the typical reference gridimplemented by the TRAPOS group, two different gridresolutions are introduced. The first refinement is in thewhole street canyon region on the x-y level, while thesecond one is local in all three directions. Validation ofall involved computational schemes is performed based onrelative available experimental data. The computed velocityfields and concentration contours imply that the typicalreference grid is a suitable choice for the velocityfields, while local grid refinement in all three directionsin a small region containing the receptor is required toupgrade the pollutant concentration results with modestadditional computational effort. Finally the RSM modelresulted in smaller concentration levels. The k-model compared to the RSM seems a more appropriate choiceto solve this particular problem.     

Atmospheric Levels of Nitrogen Oxides at a Greek Oil Refinery Compared with the Urban Measurements in Athens

Oil refining is among the industrial activities that emit considerable amounts of air pollutants into the atmosphere. Nitrogen oxides are important air pollutants that are emitted by oil refineries as products of combustion processes. The ambient air concentrations of nitrogen oxide (NO) and nitrogen dioxide (NO₂) were monitored continuously at a site close to an oil refinery, near the city of Corinth in Greece, during autumn 1997 together with the main meteorological parameters. The contribution of the oil refinery to the measured atmospheric levels of nitrogen oxides was estimated. The ambient air concentration of nitrogen oxides in the area surrounding the oil refinery were generally lower than the ambient air concentrations in the urban area of Athens in Greece, and the NO₂ levels were always below the existing air quality standards. The influence of the refinery emitted NO_x in the photochemical production of ozone seems to be more important in terms of human and vegetation exposure given the high ozone backgrounds measured in the area.     

山东省城市空气自动监测监控系统数据的应用设计和使用方法

山东省城市空气自动监测监控系统的主要功能是将全省城市自动监测站数据利用计算机网络、数据仓库等技术导入到环境监测数据仓库中，实现全省城市空气质量自动监测的统一监控和监测信息的自动管理和发布。本文简单介绍了系统控制中心端监测数据统计应用部分的功能设计和实现方法。     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.