基于矿井通风三维仿真系统软件的矿用空气幕选型方法

根据矿井风流调节的具体要求,合理选择矿用空气幕的型号是应用矿用空气幕技术的关键。在分析矿用空气幕选型依据及原理的基础上,应用矿井通风三维仿真系统软件模拟矿用空气幕运行的效果,来研究确定矿用空气幕的选型参数及影响因素。结果表明,应用矿井通风三维仿真系统软件所选择的矿用空气幕与理论推导的计算结果一致,此方法能够最大限度地反映矿山实际情况,具有直观、高效等特点。     

武汉市城市化过程中的空气质量响应研究

以武汉市2000-2013年的城市化水平和空气质量状况数据为基础,运用主成分分析法和目标比率模型构建综合评价体系,并用多元回归模型进行检验,探究城市化过程中的空气环境质量响应特征.结果表明:1)2000年以来,武汉城市化进入稳增长的快速抬升阶段,空气污染综合指数总体变化平稳,2013年有变坏的趋势;2)不同类型的污染物对城市化水平具有不同的响应规律和影响程度,SO2为倒“U”型,表明随着城市发展,SO2浓度得到控制并呈下降趋势;NO2为“U”型,近9年来NO2浓度不减反增,对空气环境污染严重;而PM10及空气质量综合水平表现为倒“N”型特征,表明现阶段空间环境呈现污染加重的趋势;3)城市化快速扩张过程中的基础设施建设、建筑扬尘,汽车尾气排放、工业烟尘等是影响武汉空间环境质量的主要因素,需有针对性地加强城市空气环境管理.     

基于正交模拟试验的矿用空气幕结构优化

为了降低空气幕的能耗,依据空气动力学理论,建立了以双三次方曲线为整流器外轮廓线的矿用空气幕模型,采用正交模拟试验方法,以出风口速度分布均匀性及阻力损失为评价指标,研究了不同结构参数下矿用空气幕内流场分布规律,计算出矿用空气幕出风口断面的速度分布均匀性参数及压力损失,得到了最优的矿用空气幕结构模型,该模型风流速度均匀性参数为0.038 5,压力损失为98.3Pa.结果表明,压力漩涡的大小及流速滞留区的范围与整流器密切相关.对矿用空气幕出风口速度分布均匀性影响最大的是供风器出风口宽度,其次为导流体中截面半径;对矿用空气幕压力损失影响最大的是供风器出风口宽度,其次为整流器及供风器长度.当导流体为圆锥体时,矿用空气幕的性能最优.     

长株潭城市环境空气中PM2.5和O3质量浓度的相关性研究

PM2.5与O3均为导致城市环境空气质量恶化的主要污染物,采用自动设备监测湖南省长沙、株洲、湘潭3市商业区和郊区空气中的PM2.5和O3质量浓度,并对数据进行相关性分析.结果表明:PM2.5和O3质量浓度的季节性变化大,其中O3质量浓度夏、秋2季高,春、冬2季低;PM2.5则秋、冬2季高,春、夏2季低;O3质量浓度峰值一般出现在当天午后,PM2.5质量浓度峰值一般出现在上午;空间分布上,O3质量浓度在郊区站点相对较高,而PM2.5质量浓度在商业区站点较高.PM2.5与O3质量浓度变化以负相关为主,即PM2.5质量浓度高时,O3质量浓度则低,反之亦然,二者一般不产生叠加污染.总体上,夏、秋季节应主要防O3污染,春、冬季节则主要防PM25污染.     

Using Sound to Reduce Visual Distraction from In-vehicle Human–Machine Interfaces

Objective: Driver distraction and inattention are the main causes of accidents. The fact that devices such as navigation displays and media players are part of the distraction problem has led to the formulation of guidelines advocating various means for minimizing the visual distraction from such interfaces. However, although design guidelines and recommendations are followed, certain interface interactions, such as menu browsing, still require off-road visual attention that increases crash risk. In this article, we investigate whether adding sound to an in-vehicle user interface can provide the support necessary to create a significant reduction in glances toward a visual display when browsing menus.

Methods: Two sound concepts were developed and studied; spearcons (time-compressed speech sounds) and earcons (musical sounds). A simulator study was conducted in which 14 participants between the ages of 36 and 59 took part. Participants performed 6 different interface tasks while driving along a highway route. A 3 × 6 within-group factorial design was employed with sound (no sound /earcons/spearcons) and task (6 different task types) as factors. Eye glances and corresponding measures were recorded using a head-mounted eye tracker. Participants’ self-assessed driving performance was also collected after each task with a 10-point scale ranging from 1 = very bad to 10 = very good. Separate analyses of variance (ANOVAs) were conducted for different eye glance measures and self-rated driving performance.

Results: It was found that the added spearcon sounds significantly reduced total glance time as well as number of glances while retaining task time as compared to the baseline (= no sound) condition (total glance time M = 4.15 for spearcons vs. M = 7.56 for baseline, p =.03). The earcon sounds did not result in such distraction-reducing effects. Furthermore, participants ratings of their driving performance were statistically significantly higher in the spearcon conditions compared to the baseline and earcon conditions (M = 7.08 vs. M = 6.05 and M = 5.99 respectively, p =.035 and p =.002).

Conclusions: The spearcon sounds seem to efficiently reduce visual distraction, whereas the earcon sounds did not reduce distraction measures or increase subjective driving performance. An aspect that must be further investigated is how well spearcons and other types of auditory displays are accepted by drivers in general and how they work in real traffic.     

基于人工神经网络建模的PTC功率智能检测技术

PTC是家用空调器中主要器件之一,具有耗电量大、非线性的特征。目前PTC常用的功率检测方法是通过"专用电量计量芯片结合电压、电流采样电路"来实现,存在成本高和可靠性低问题。提出一种基于人工神经网络的PTC功率纯软件计算方法,无需增加任何硬件成本。通过实验验证,精度达±3%,满足产品化需求,成熟可靠。     

Influence of concentration distribution of hydrogen in air on measured flammability limits

There is a clear difference between exiting data on the measured flammability limits of hydrogen-air mixture. The non-uniformity of concentration distribution of hydrogen in air is a contributor to deviations of the upper flammability limit (UFL) and the lower flammability limit (LFL) measured in different experiments. This paper presents a numerical model to simulate the gas mixing process from start to stability, to predict the concentration distribution, and to research the influence of concentration distribution of hydrogen in air on measured UFLs and LFLs. The commercial software package Fluent was used to carry out the numerical simulation for the concentration distribution of hydrogen in air in the vessels with length-to-diameter ratios (L: D) of 1:1, 3:1, 5:1 and 7:1 respectively. Based on the numerical simulation and analysis, the influence of concentration distribution on measured flammability limits was demonstrated for hydrogen in air in the vessel. It is found that the deviations of measured flammability limits of hydrogen in air are the minimum in the vessel with length-to-diameter ratio of 1:1, and augment with the augmentation of vessel length-to-diameter ratio. Moreover, it is presented that the deviations of measured flammability limits of hydrogen in the center of the vessel are lower than that in the top and the bottom.     

Numerical simulation of premixed methane–air deflagration in a semi-confined obstructed chamber

In this paper, large eddy simulation coupled with a turbulent flame speed cloure (TFC) subgrid combustion model has been utilized to simulate premixed methane–air deflagration in a semi-confined chamber with three obstacles mounted inside.The computational results are in good agreement with published experimental data, including flame structures, pressure time history and flame speed. The attention is focused on the flame flow field interaction, pressure dynamics, as well as the mechanism of obstacle-induced deflagration. It is found that there is a positive feedback mechanism established between the flame propagation and the flow field. The pressure time history can be divided into four stages and the pseudo-combustion concept is proposed to explain the pressure oscillation phenomenon. The obstacle-induction mechanism includes direct effect and indirect effect, but do not always occur at the same time.     

Kinetics characteristics of coal low-temperature oxidation in oxygen-depleted air

The longwall gob (mined-out) area is one of the main places that are prone to coal spontaneous combustion and most of the residual coal in it is in oxygen-depleted air as it is a semi-enclosed space. A DSC (Differential scanning calorimetry) test system was designed to accurately test the heat generation of coal oxidation in different oxygen concentration atmosphere, based on which the kinetics parameters (activation energy and pre-exponential factor) of coal low-temperature oxidation in oxygen-depleted air were solved out. The results show that the kinetics parameters present obvious stage features and the lower the oxygen concentration is, the smaller is the difference of the kinetics parameters that in different oxidation stages. When the oxygen concentration is lower than 5% and 3% for jet coal and meagre coal respectively, the kinetics parameters of slow oxidation start to be greater than that of rapid oxidation. Both in the slow oxidation and rapid oxidation stage, with the decrease of oxygen concentration, kinetics parameters present significant decline on the whole while in different oxygen concentration range, the decline rate is different. It's concluded that when assessing the residual coal's self-heating risk, we need to use the corresponding kinetics parameters of coal oxidation in the oxygen concentration of the location where the residual coal is and the safety factor will be greater to only use the kinetics parameters of coal oxidation in slow oxidation stage. This study is of great significance for the assessment and control of the self-heating risk of coal that in different oxygen concentration atmospheres of the longwall gob areas.     

The Effect of Local Biomass Projects on Energy Balance and GHG Emission: A Life Cycle Approach

Emerging attention has been given to the use of biomass in local areas for its contribution to reducing fossil fuel dependence and mitigating global warming. The objective of the present study is to develop a method that quantitatively assesses the effects of local biomass projects on fossil fuel consumption and greenhouse gas (GHG) emission. A practical method based on a life cycle approach is proposed and applied to a case of bioethanol project in Miyako Islands of Japan. The project is aiming to produce bioethanol from molasses within the islands, and to replace the entire gasoline consumed in the islands to E3 fuel (i.e., a mixture of 3% ethanol and 97% gasoline by volume). The assessment using the developed method revealed that, first, the complete shift from gasoline to E3 fuel allows for decreases in fossil fuel consumption and GHG emission. Second, the performance of the project is improved by the integration of the ethanol plant and the sugar factory. Moreover, the assessment found that, in small-scale bioethanol projects, the contribution of capital goods to life cycle fuel consumption and GHG emission is not negligible.