Optimization of micro-aeration intensity in acidogenic reactor of a two-phase anaerobic digester treating food waste

Micro-aeration is known to promote the activities of hydrolytic exo-enzymes and used as a strategy to improve the hydrolysis of particulate substrate. The effect of different micro-aeration rates, 0, 129, 258, and 387 L-air/kg TS/d (denoted as LBR-AN, LBR-6h, LBR-3h and LBR-2h, respectively) on the solubilization of food waste was evaluated at 35 °C in four leach bed reactors (LBR) coupled with methanogenic upflow anaerobic sludge blanket (UASB) reactor. Results indicate that the intensity of micro-aeration influenced the hydrolysis and methane yield. Adequate micro-aeration intensity in LBR-3h and LBR-2h significantly enhanced the carbohydrate and protein hydrolysis by 21–27% and 38–64% respectively. Due to the accelerated acidogenesis, more than 3-fold of acetic acid and butyric acid were produced in LBR-3h as compared to the anaerobic treatment LBR-AN resulting in the maximum methane yield of 0.27 L CH₄/g VS_added in the UASB. The performance of LBR-6h with inadequate aeration was similar to that of LBR-AN with a comparable hydrolysis degree. Nevertheless, higher aeration intensity in LBR-2h was also unfavorable for methane yield due to significant biomass generation and CO₂ respiration of up to 18.5% and 32.8% of the total soluble hydrolysate, respectively. To conclude, appropriate micro-aeration rate can promote the hydrolysis of solid organic waste and methane yield without undesirable carbon loss and an aeration intensity of 258 L-air/kg TS/d is recommended for acidogenic LBR treating food waste.     

Enterotoxin production and antimicrobial susceptibility in Staphylococci isolated from traditional raw milk cheeses in Serbia

This study was undertaken to determine the prevalence of coagulase positive staphylococci (CPS) by examining a total of 71 raw milk cheeses. Additionally, enterotoxigenicity, antimicrobial susceptibility and the presence of mecA and mecC genes in the staphylococcal isolates were investigated. The isolation and enumeration procedure of CPS followed the International Organization for Standardization (ISO) standard. The presumptive staphylococci were identified by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) using the VITEK MS system. VIDAS® Staph enterotoxin II assay was used for the detection of classical enterotoxins. Antimicrobial susceptibility testing (AST) was accomplished performing the disk diffusion method. All suspected methicillin resistant staphylococci were investigated for the presence of mecA and mecC genes by PCR assay. A high prevalence (87.32%) of CPS was detected in the cheeses at contamination levels up to 5.58 log CFU g^?1. Among 47 staphylococcal isolates screened for enterotoxin production, only one isolate, identified as S. hyicus, was confirmed as being enterotoxigenic. Resistance to penicillin (63.70%) was the most common resistance among the tested Staphylococcus aureus isolates. The dominant phenotypic resistance patterns in coagulase negative staphylococci (CNS) were resistance to ofloxacin and fusidic acid. All CNS isolates were susceptible to the clinically important antibiotics clindamycin, chloramphenicol, gentamicin, linezolid, rifampicin and trimethoprim-sulfamethoxazole. The mecA and mecC genes were not detected. To the best of our knowledge, this is the first study concerning evaluation of the presence of methicillin resistant staphylococci (MRS) in dairy products in Serbia.     

去除城市生活污泥中有机络合态金属强化其厌氧生物制气

为提高城市生活污泥厌氧消化沼气产率,本文考察了通过金属络合剂EDTA预处理污泥,以去除城市生活污泥中有机络合态金属,强化其厌氧生物制气的效果.结果表明,经EDTA预处理去除金属后的污泥(实验组)较未预处理的污泥(对照组)的有机络合态金属含量减少[(5.09±0.57)%~(1.37±0.20)%,以TS计],溶解性有机质显著提高(SCOD提升627%),暗示该预处理方法能够极大地去除有机络合态金属并强化污泥有机质的溶出.通过测定污泥有机质溶出表观活化能发现,实验组污泥有机质溶出表观活化能比对照组降低36%,表明预处理能够有效降低有机质溶出反应的能量壁垒.污泥厌氧发酵研究发现,在16d的污泥厌氧产酸实验中,实验组VFAs浓度高于对照组,较对照组最大提升42%;在22 d的污泥厌氧产甲烷测试实验(BMP)中,实验组单位有机质累积甲烷产量比对照组增加48%,表明EDTA预处理对提高污泥厌氧消化产沼气具有重要的作用.通过进一步产沼气动力学研究发现,实验组的产沼气限速步骤在产甲烷阶段,而对照组限制于水解阶段,表明经EDTA预处理能有效地破除城市生活污泥厌氧消化过程的水解限速.     

Assessment of the clear-sky bias issue using continuous PM10 data from two AERONET sites in Korea

A bias in clear-sky conditions that will be involved in estimating particulate matter(PM)concentration from aerosol optical depth(AOD) was examined using PM_(10) from two Aerosol Robotic Network sites in Korea. The study periods were between 2004 and 2007 at Anmyon and between 2003 and 2011 at Gosan, when both PM_(10) and AOD were available. Mean PM_(10) when AOD was available(PM AOD) was higher than that from all PM_(10)data(PM all) by 5.1 and9.9 μg/m~3 at Anmyon and Gosan, which accounted for 11% and 26% of PM all, respectively.Because of a difference between mean PM_(10) under daytime clear-sky conditions(PM clear)and PM AOD, the variations in ΔPM_(10), the difference of PM all from PM clear rather than from PM AOD, were investigated. Although monthly variations in ΔPM_(10)at the two sites were different, they were positively correlated to those in ΔT, similarly defined as ΔPM_(10)except for temperature, at both sites. ΔPM_(10)at Anmyon decreased to a negative value in January due to an influence of the Siberian continental high-pressure system while ΔPM_(10)at Gosan was high in winter due to an effect of photochemical production at higher temperatures than at Anmyon.     

北京市郊区夏季臭氧重污染特征及生成效率

为研究北京郊区夏季O₃(臭氧)重污染过程特征及O₃生成的光化学敏感性,基于2016年夏季在北京郊区开展的针对O₃及其相关污染物的强化观测试验(7月23日—8月31日,共计40 d),分析了观测期间O₃浓度[以φ(O₃)计]变化特征、O₃重污染过程主控因素与O₃敏感性化学特征.结果表明:观测期间φ(O₃)超标时有发生,最大小时φ(O₃)为151.1×10-9,其中有15 d的φ(O₃)最大8 h滑动平均值(O₃-max-8h)超过了GB 3095—2012《环境空气质量标准》二级标准限值,占观测天数的37.5%;不同O₃重污染过程成因有所不同,城市烟羽传输的污染物对郊区O₃重污染过程影响显著(观测期间臭氧重污染过程:过程1,7月27—29日;过程3,8月9—11日;过程4,8月16日;过程5,8月21—24日),区域光化学污染对郊区O₃重污染过程也有贡献(观测期间O₃重污染过程2:8月4—6日);结合后向气流轨迹进一步辅助说明了不同重污染过程中O₃的来源不同.研究还发现,观测区域存在反“周末效应”现象,说明观测区域周末受人为影响较为明显;基于观测数据计算的OPE(O₃生成效率)分析了O₃光化学敏感性表明,在有OPE值的22 d内NO_x控制区和VOCs控制区出现的概率(41%)相等,即观测区域O₃对NO_x和VOCs均敏感;此外还发现,在O₃重污染过程中光化学敏感性会随其反应进程发生改变,由NO_x控制区逐渐转变为VOCs控制区.      

生活垃圾焚烧飞灰固化体力学及重金属浸出特性

以苏州七子山生活垃圾焚烧厂产生的飞灰为研究对象,采用水泥作为固化剂,研究水泥飞灰固化体的应力应变特征及重金属浸出特性,并探讨了水泥飞灰配合比、养护时间等关键性因素对这些特性的影响。实验结果表明:较养护3 d的样品,其余养护时间的样品强度平均增长了约96.2%,而其破坏应变平均减小了56%。随着水泥含量和养护时间的增加,飞灰固化体的强度上升,而其破坏应变减小,该趋势主要归因于钙矾石(AFt)的形成促进了飞灰固化体强度的发展。较飞灰原样,飞灰固化体的重金属浸出浓度随着水泥含量、养护时间的增加而降低了38%~99%,重金属的迁移被限制,主要归因于水化硅酸钙(C—S—H)和钙矾石(AFt)的形成,以及飞灰和水泥水化反应创造的强碱性环境。     

厌氧发酵处理庆大霉素菌渣的可行性及条件优化

采用厌氧发酵处理庆大霉素菌渣,考察了含固率、接种比、接种污泥、发酵底物等因素对庆大霉素菌渣厌氧发酵的影响,并用累积净甲烷产量衡量庆大霉素菌渣进行厌氧发酵的可行性及发酵程度。试验结果证实了庆大霉素菌渣进行厌氧发酵的可行性,其中含固率和接种比对发酵的影响较大,最佳条件为含固率5%,接种比1/3;对比试验所用3种接种污泥,发现接种某造纸厂污水处理IC反应器的厌氧颗粒污泥效果最优,在最优含固率和接种比的条件下,累积净产甲烷量为28.21 m3/t;此外,试验还证实,采用不同菌渣的联合发酵表现出了明显的协同作用,在最优条件下,庆大霉素菌渣与林可霉素菌渣按1∶2的比例联合发酵的产甲烷量可达到37.5 m3/t。     

餐厨垃圾厌氧消化运行试验研究

采用猪粪厌氧消化的消化污泥为接种物,在中温(37℃)条件下,以连续进料的方式对餐厨垃圾的湿式厌氧消化进行了启动以及运行试验,监测整个实验过程中产气量、pH、VFA、碱度等能够反映厌氧消化的系统指标。结果表明:本实验中系统最佳有机负荷为2.8 kg/(m~3·d)(以VS计),超过此负荷后,依靠系统自身恢复和人工调节,pH很难恢复正常运行状态。正常运行过程中,pH稳定在7.5~8.0,VFA稳定在2 000 mg/L左右,碱度在6 000~9 000 mg/L,氨氮在1 500~2 000 mg/L,底物含水率为96%~98%。系统超负荷运行后,产气量和pH下降,VFA浓度上升,碱度、氨氮、含水率基本保持稳定。     

基于AHP的环境经济评价在污水处理厂清洁生产中的应用研究

环保类项目主要价值体现为环境效益,清洁生产中高费方案分析中,单纯分析经济费用效益,经常为不可行方案.文章以污水处理厂3个不同的清洁生产方案(增加化学除磷、污泥深度脱水、增加除臭设施)为例,对他们的环境效益进行了货币化估值,并将AHP确定权重的方法引入环境影响货币化估值中,对纳入环境价值的方案分析其内部收益率,从而分析清洁生产中方案的可行性.分析得出化学除磷和污泥深度脱水的内部收益率分别为12.89%和13.54%,具有可行性,因此优选实施污泥深度脱水方案.     

兰州市废旧手机产生量预测分析研究

手机普及率日益提高,随之产生的废弃量也日益增多,分别采用时间梯度模型、市场供给A模型、斯坦福(stanford)模型对兰州市2013年-2022年废旧手机的产生量进行了预测.结果显示,不同模型预测结果之间存在较大差异,市场供给A模型和斯坦福(Stanford)模型的预测结果比较接近,均大于时间梯度模型的预测结果,三种模型预测的兰州市2022年废旧手机的产生量分别为40.40万、46.67万和21.04万部.总体上看,兰州市废旧手机的产生量增长趋势较快.