Occurrence of multiclass UV filters in treated sewage sludge from wastewater treatment plants

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. So far, there is only one extensive survey on the occurrence of UV filter residues in sewage sludge. However, more data are required to draw a reliable picture of the fate and effects of these compounds in the environment. This study attempts to fill this gap through the determination of selected UV filters and derivatives namely 4-methylbenzylidenecamphor, benzophenone-3, octocrylene, ethylhexylmethoxycinnamate, ethylhexyldimethyl PABA, 4-hydroxybenzophenone, 2,4-dihydroxybenzophenone, and 4,4′-dihydroxybenzophenone in treated sewage sludge.The target compounds were extracted using pressurized liquid extraction and after this, determined by ultra high resolution liquid chromatography-tandem mass spectrometry. The determination was fast and sensitive, affording limits of detection lower than 19 ng g⁻¹ dry weight (dw) except for 2,4-dihydroxybenzophenone (60 ng g⁻¹ dw). Good recovery rates, especially given the high complexity of sludge matrix (between 70% and 102% except for 2,4-dihydroxybenzophenone (30%)) were achieved.The application of developed method allowed reporting for the first time the occurrence of two major degradation products of benzophenone-3 that have estrogenic activity in sewage sludge: 4,4′-dihydroxybenzophenone (in 5/15 WWTPs) and 4-hydroxybenzophenone (in 1/15 WWTPs). Results revealed the presence of UV filters in 15 wastewater treatment plants in Catalonia (Spain) at concentrations ranging from 0.04 to 9.17 μg g⁻¹ dw.     

Retention time profiling of all 136 tetra- through octa- chlorinated dibenzo-p-dioxins and dibenzofurans on a variety of Si-Arylene gas chromatographic stationary phases

The applicability of three different Silphenylene Silicone co-polymer (Si-Arylene) GC stationary phases (J&W Scientific DB-5ms, Varian VF-5ms, and VF-Xms) has been evaluated for the separation of all 136 tetra- through the octa- chlorinated dibenzo-p-dioxins (PCDD) and chlorinated dibenzofurans (PCDF) from closely eluting isomers using gas chromatography/high resolution mass spectrometry (GC/HRMS). Their relative performance data are compared to the “conventional” 5% diphenyl 95% dimethylpolysiloxane GC column (Supelco Equity-5) and to each other based on absolute retention times, visualized mass chromatograms, and the separation of 2,3,7,8-substituted isomers. VF-Xms GC column was able to demonstrate a better performance towards separation of 2,3,7,8-substituted PCDD/PCDF compared to other Si-Arylene GC columns tested, where only 2,3,4,7,8-PnCDF can not be resolved from 1,2,3,6,9-PnCDF and 2,3,4,6,7,8-/1,2,3,6,8,9-HxCDF and 1,2,3,7,8,9-/1,2,3,4,8,9-HxCDF can be at least partially resolved. These data suggest that the development of a single GC column for the separation of all 17 2,3,7,8-substituted dioxins and furans is feasible, which therefore could be used as a standard tool for the PCDD/PCDF methods globally including USEPA methods 1613b, 8290A, 8280B, European Standard Method EN 1948, Canadian methods DFPCB-E3418, EPS 1/RM/19, Japanese methods JIS K0311 and JIS K0312. Having one specific GC column to separate all 2,3,7,8-substituted PCDD/PCDF will significantly improve the data quality, comparability by the various methods and assessment techniques while simultaneously leading to a more cost and time efficient operation.     

微波消解-ICP—MS测定土壤和水系沉积物中的重金属

建立了一种采用逆王水和氢氟酸的混合体系微波酸消解土壤与水系沉积物,电感耦合等离子体质谱法快速测定六种金属元素（As、Cd、Pb、Cu、Cr和Ni）含量的方法。本文研究了消解温度和消解时间对消解效果的影响。结果表明,在190℃下运行25分钟对土壤与水系沉积物中的六种金属元素均具有很好的消解能力,备元素的测定值与标准值相符。在对实际土壤与水系沉积物样品进行分析后得出采样区域的土壤与沉积物中这六种金属含量水平正常。     

声屏障在化工行业的应用

化工行业噪声源多,声级高,防火、防爆、防腐、防风险等要求特别严格。采用常规噪声控制措施受到许多限制,而采用隔声吸声屏障降噪有一定效果。本文以上海几个化工企业为例,论述了隔声吸声屏障的设计、应用及效果。     

冷原子荧光法测定汞标准物质的两种定容方法比较

应用ZYG-Ⅱ型智能荧光测汞仪测定汞标准物质浓度,通过用固定液（将0．5g重铬酸钾溶于950mL水中,再加50mL的HNO3）定容与用3％的HNO3定容所测得的结果进行比较,结果表明,用固定液定容,比用3％的HNO3定容,其测得的结果与保证值之间的相对偏差要小。     

Effect of liming on the distribution of heavy metals in untreated industrial sewage sludge produced in Pakistan for the cultivation of <Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.)

The recycling of sewage sludge on agriculture land represents an alternative, advantageous, disposal of this waste material. The aim of the present study was to evaluate the feasibility of using industrial sewage sludge, produced in Pakistan, as a fertiliser. Agricultural soil amended with 25% (w/w) sewage sludge with or without lime treatment was used for growing a variety of sorghum (PARC-SS-1). The mobility of the heavy metals (HMs) (Cd, Cu, Cr, Ni, Pb and Zn) and metalloid (As) in the untreated industrial waste water sewage sludge (UIWS) samples were assessed by applying a modified BCR (Community Bureau of Reference) sequential extraction procedure. The single extraction procedure comprised of the application of mild extractant (CaCl₂) and water for the estimation of the proportion of easily soluble metal fractions. The precision and accuracy of BCR was evaluated by using a certified reference material of soil amended with sewage sludge BCR 483. The plant available metal contents, as extracted by the deionised water and 0.01 M CaCl₂ solution and exchangeable fraction of BCR sequential, decreased with lime application in the range of 10–44% for As, Cr, Ni, Pb and Zn, except in the cases of Cd and Cu, where their mobility was increased by 10% and 24%, respectively. Sludge amendment enhanced the dry weight yield of sorghum and the increase was more obvious after liming up to 25%. The uptake of HMs were lower in test samples (3.2–21.8%), except for Cu and Cd, which was higher (4%), while they were below the permissible limit of these metals. The present experiment demonstrates that liming was important in factors facilitating the growth of sorghum in sludge-amended soil.     

Separation and recovery of carbon dioxide by a membrane flash process

A novel process for carbon dioxide (CO₂) separation, which was named a membrane flash process, was developed to realize an energy-saving technology and to substitute it for a conventional regenerator. The electric energy for CO₂ recovery in a membrane flash process using aluminum oxide and diethanolamine was lower than the thermal energy of the conventional chemical absorption process. Flashing at elevated temperature by the low temperature energy significantly reduced the electric energy and required much less membrane area. This process has potentiality of low cost capture of CO₂ when the low temperature energy, which is not available for other purposes, can be utilized to elevate flashing temperature.     

Secondary ozonides of substituted cyclohexenes: a new class of pollutants characterized by collision-induced dissociation mass spectrometry using negative chemical ionization

Recent studies indicate that secondary ozonides of cyclic alkenes are formed in atmospheric reactions and may be relatively stable. The secondary ozonides (SOZs) of cyclohexene (1), 1-methylcyclohexene (2), 4-isopropyl-1-methylcyclohexene (3) and 4-isopropenyl-1-methylcyclohexene (limonene) (4) have been characterized by rapid gas chromatography electron ionization (EI), negative and positive chemical ionization (CI: ammonia, isobutane and methane) and collision-induced dissociation (CID) mass spectrometry. Both EI and positive CI spectra were found unsuitable for reproducible analysis. However, negative CI showed stable (M−H)⁻ ions with minor fragmentation. CID of the (M−H)⁻ ions resulted in simple and reproducible fragmentation patterns for all four SOZs with loss of m/z 18, 44 and 60, tentatively assigned as H₂O, CO₂ and C₂H₄O₂ or CO₃, respectively. Thus, negative CI-MS–MS in combination with rapid gas chromatography is the preferred method for identification of secondary ozonides of cyclohexenes.     

Analysis of accumulation, extractability, and metabolization of five different phenylarsenic compounds in plants by ion chromatography with mass spectrometric detection and by atomic emission spectroscopy

Phenylated arsenic compounds occur as highly toxic contaminants in former military areas where they were formed as degradation products of chemical warfare agents. Some phenylarsenic compounds such as roxarsone and aminophenylarsonic acids were applied as food additive and veterinary drugs in stock-breeding and therefore pose an environmental risk in agricultural used sites. Very few data exist in the literature concerning uptake and effects of phenylarsenic compounds in plants growing on contaminated soils. In this study, the accumulation, extractability, and metabolization of five different phenylarsenic compounds, phenylarsonic acid, p- and o-aminophenylarsonic acid, phenylarsine oxide, and 3-nitro-4-hydroxyphenylarsonic acid called roxarsone, by the terrestrial plant Tropaeolum majus were investigated. Ion chromatography coupled to inductively coupled plasma mass spectrometry was used to differentiate these arsenic compounds, and inductively coupled plasma atomic emission spectroscopy was used for total arsenic quantification. All compounds considered were taken up by the roots and transferred to stalks, leaves, and flowers. The strongest accumulation was observed for unsubstituted phenylarsonic acid followed by its trivalent analogue phenylarsine oxide that was mostly oxidized in soil whereas the amino- or nitro- and hydroxy-substituted phenylarsonic acids were accumulated to a smaller degree.The highest extraction yield of 90% for ground leaf material was achieved by 0.1 M phosphate buffer, pH 7.7, in a two-step extraction with a total extraction time of 24 h. The extraction of higher amounts of arsenic (50–70% of total arsenic present in leaves depending on arsenic species application) from non-ground intact leaves with deionized water in comparison with the buffer (20–40% of total arsenic) is ascribed to osmotic effects. The arsenic species analysis revealed a cleavage of the amino groups from the phenyl ring for plants treated with aminophenylarsonic acids. A further important metabolic effect consisted in the production of inorganic arsenate and arsenite from the phenylated arsonic acid groups.     

浅谈串联四极杆质谱（GC—QqQ-MS／MS）在土壤样品有机污染物分析中的应用

建立了ASE-GPC—GC-QqQ—MS／MS测定土壤中17种有机氯农药和19种多氯联苯以及MAE-SPE—GC-QqQ—MS／MS测定土壤中16种多环芳烃和18种邻苯二甲酸酯的方法。多环芳烃和邻苯二甲酸酯定量限在0．02～2．81μg／kg之间,有机氯农药和多氯联苯定量限在0．01～0．51μg/kg之间。样品加标浓度在5μg/kg时多环芳烃和邻苯二甲酸酯的平均回收率在66．6％～122．1％之间,相对标准偏差均小于20％;有机氯农药和多氯联苯平均回收率在79．6％～93．2％之间,相对标准偏差均小于15％。