偶氮染料脱色菌Lysinibacillus sp. FS1的脱色性能

从佛山某工业园印染废水处理厂曝气池中,经梯度驯化筛选出一株对多种染料具有较强脱色能力的菌株FS1,通过16S rDNA基因序列分析初步鉴定为Lysinibacillus sp.,研究了该菌株在不同营养条件(氮源、碳源、碳源浓度),不同培养条件(pH、温度、供氧条件),不同染料(甲基橙、亚甲基蓝、中性红、酸性红B)和染料浓度下的脱色性能。结果表明,该菌株的最佳脱色条件:温度30~40℃,pH 7~9,氯化铵1 g/L, 葡萄糖2 g/L的厌氧条件下培养脱色效果最好,10 h时对酸性红B脱色率可达98.73%左右,且脱色过程符合一级反应动力学方程:-ln(At/A0)=0.0588t-0.0448。该菌株可降解多种染料,脱色率均随污染强度的升高先增大后减小,对高浓度染料和混合染料也表现出很好的脱色效果,是一株高效广谱的染料降解菌,具有处理印染废水的开发应用价值。     

天然矿物负载Fe/Co催化H2O2氧化降解阳离子红3R

类Fenton反应关键是催化剂的活性,利用浸渍法负载铁、钴双金属对天然矿物材料进行改性,提高其催化活性,并运用扫描式电子显微镜(SEM)、X射线能谱仪(EDS)、X射线衍射(XRD)等表征手段对负载前后的材料进行表征分析.结果表明负载后材料中生成Fe2O3和Co Fe2O4两种新物质.将合成的催化剂用于催化H2O2氧化阳离子红3R染料废水,在催化剂投加量3 g·L-1,H2O2投加量0.3 m L·L-1,反应时间1 h条件下,100 mg·L-1阳离子红3R废水脱色率可达99.8%,TOC去除率可达58.4%,催化剂中活性组分主要为表面负载的Fe2O3和Co Fe2O4,电子自旋共振(ESR)分析表明催化氧化过程中产生羟基自由基,阳离子红3R发色基团在1 min已被完全破坏,光谱分析表明反应过程中有小分子物质生成.催化氧化效果受染料废水初始p H值影响小,适应p H范围广,解决了传统Fenton反应p H条件苛刻的问题.研究结果为印染废水处理提供了具有工程应用潜力的技术方法.     

粉煤灰对阴离子水溶性混合染料的吸附动力学

以燃煤废弃物粉煤灰作为吸附剂,对活性红23与活性蓝4、活性黄4、酸性黑1、酸性蓝193的混合染料溶液进行吸附性能研究.结果表明,在不同的混合体系中,活性红23的脱色率基本保持在60%~70%;体系中酸性染料的脱色率均超过90%;活性蓝4的脱色率高达85%;活性黄4的脱色率仅为50%.准二级吸附动力学能够更好地描述粉煤灰对水溶性混合染料的吸附过程.染料在溶液中的外扩散系数均为10-4cm·s-1数量级,染料在粉煤灰颗粒的内扩散系数为10-8cm2·s-1数量级.根据BN数,水溶性染料在粉煤灰上的竞争吸附是外扩散控制的吸附过程.     

Photoassisted Fenton degradation of phthalocyanine dyes from wastewater of printing industry using Fe(Ⅱ)/γ-Al2O3 catalyst in up-flow fluidized-bed

Fe(II)/γ-Al2O3 powders synthesized using the dipping method were produced from a mixed aqueous solution containing aluminium oxide(γ-Al2O3) and iron(II)-precursor(FeSO4), and used for photoFenton degradation of phthalocyanine dyes(PCS) under ultraviolet(UV) irradiation in an up-flow fluidized bed. The catalysts were characterized by XRD, ESCA, BET, EDS and SEM. The results showed that Fe2+ion was compounded on the γ-Al2O3 carrier. The effects of different reaction parameters such as catalyst activity, dosage and solution pH on the decolorization of PCS were assessed. Results indicated that maximum decolorization(more than 95%) of PCS occurred with20 wt% Fe(II)/γ-Al2O3 catalyst(dosage of 60 g/L) using a combination of UV irradiation and heterogeneous Fenton system. The degradation efficiency of PCSincreases as pH decreases, exhibiting a maximum efficiency at pH 3.5. The recycled catalyst was capable of repeating three runs without a significant decrease in treatment efficiency, and this demonstrated the stability and reusability of catalyst.     

Thermal hazard analysis of 1-((cyano-1-methylethyl) azo) formamide and effect of incompatible substances on its thermal decomposition

1-((cyano-1-methylethyl) azo) formamide (CABN) is an azo compound that exhibits high thermal sensitivity and self-reactivity. Because of incorrect operation, incompatible substances and other dangerous conditions, thermal explosion accidents may occur during the manufacturing, storage, and transportation of CABN. The pyrolysis characteristics of CABN and its mixture for various heating rates were assessed using differential scanning calorimetry. The results showed that incompatible substances increased the risk of CABN. Moreover, the thermal runaway of CABN under an adiabatic condition was studied using an adiabatic rate calorimeter to obtain the parameters under adiabatic condition. Based on the experimental data, the kinetic parameters of CABN and its mixtures were obtained. In addition, a thermal decomposition kinetic model of CABN was created using Thermal Safety Series. All experiments have shown that the conditions and parameters of CABN must be strictly controlled.     

Mg—Al水滑石对偶氮染料活性艳红X-3B的脱色性能研究

采用共沉淀法合成出一系列镁铝摩尔比不同的碳酸根型水滑石（LDHs）,经500℃高温煅烧制备出镁铝复合氧化物CLDH,并用X-射线、红外光谱对它们进行表征。考查了吸附剂投加量、反应时间、初始pH值等因素对LDHs和CLDH处理阴离子染料活性艳红X-3B模拟废水效果的影响,并对吸附机理进行探讨。实验结果表明：以镁铝摩尔比为3：1时制得的水滑石对活性艳红X-3B溶液的脱色效果最好。水滑石LDHs及其焙烧产物CLDH对活性艳红X-3B染料均具有较好的吸附性能,最佳反应时间分别为60min和30min;在较宽的pH范围内二者的脱色性能稳定,且CLDH对该染料的吸附效果要优于LDHs。LDHs及CLDH对活性艳红X-3B的吸附结果符合Langmuir吸附等温式,25℃下饱和吸附量分别为263．77mg／g和875．23mg／g。LDHs及CLDH的吸附机理分别为离子交换和层状结构重建。饱和吸附后的CLDH用高温热解法再生,吸附性能良好,随再生次数增多,脱色率下降。     

Effect of cycle time on biodegradation of azo dye in sequencing batch reactor

The effects of cycle time on the biodegradation of the azo dye remazol brilliant violet 5R (RBV-5R) were investigated in an anaerobic–aerobic sequencing batch reactor (SBR). System performance was determined by monitoring chemical oxygen demand (COD), color, anaerobic enzyme (azo reductase) and aerobic enzyme (catechol 2,3-dioxygenase), and aromatic amine concentration. SBR was operated in three different total cycle times (48 h, 24 h and 12 h), fed with a synthetic textile wastewater. In this study, the anaerobic period of SBR was found to allow the reductive decolorization of azo dye and the aerobic period was found to be effective on further COD removal after the anaerobic period. The percentage reductions in color by the anaerobic stage of the SBR were at 72%, 89% and 86% for the 24-h, 12-h and 6-h cycle times, respectively. Total COD removal efficiencies were over 75% for all operational conditions and about 70% of the COD removal was achieved in the first 3 h of anaerobic stages. During the decolorization of RBV-5R, two sulfonated aromatic amines (benzene-based and naphthalene-based) were formed and detected by HPLC. Aerobic phases of SBR with total cycle times of 48 h, 24 h and 12 h were able to remove benzene-based aromatic amines with removal efficiency of 64%, 92% and 89%, respectively. The results indicated that the best SBR performance in terms of color removal and aromatic amine degradation was achieved from total cycle time of 24 h.     

The use of respirometric measurements to determine the toxicity of textile dyes in aqueous solution and after oxidative decolourisation processes

Selected results from the degradation of reactive-dye hydrolysates after UV irradiation, ozonation and sodium peroxodisulphate (NaPS) treatment are presented. Reactive dyes with representative chromophores and anchor groups were chosen for the research project. Different stages of oxidative decolourisation were examined and determined by water parameters for biological degradation (BOD). The paper focuses on toxicity tests with Pseudomonas putida to consider whether the oxidative treatments result in products with a risk for the environment. Tests were performed with the AQUALYTIC^® Sensomat System, which measures biological oxygen demand (BOD). It was determined that the chosen oxidative treatments had as a rule no bearing on respiration of P. putida. Experiments with hydrolysates after short-term UV irradiation resulted in a slightly increased but not long-lasting toxicity in comparison with treatments with ozone or NaPS. Toxic effects were found in tests with hydrolysates of metalliferous dyes. During oxidative treatment, metals were liberated from the chromophores. This did cause complete inhibition of respiration of P. putida. Dye Blue E, a member of a dye class with chlorotriazine anchor groups, was itself found to be toxic, caused by the reactivity of the anchor group. The hydrolysate is only of minor toxicity.     

Adsorption of dyes onto activated carbon prepared from olive stones

Activated carbon was produced from olive stones（OSAC） by a physical process in two steps. The adsorption character of this activated carbon was tested on three colour dyes molecules in aqueous solution： Methylene blue（MB）, Rhodamine B（RB） and Congo Red（CR）. The adsorption equilibrium was studied through isotherms construction at 30℃, which were well described by Langmuir model. The adsorption capacity on the OSAC was estimated to be 303 mg/g, 217 mg/g and 167 mg/g respectively for MB, RB and CR. This activated carbon has a similar adsorption properties to that of commercial ones and show the same adsorption performances. The adsorption kinetics of the MB molecule in aqueous solution at different initial concentrations by OSAC was also studied. Kinetic experiments were well fitted by a simple intra-particle diffusion model. The measured kinetics constant was influenced by the initial concentration and we found the following correlation： Kid = 1.55 C0^0.51.     

Fe0/荧光假单胞菌联合处理直接耐晒黑的脱色特性

采用荧光假单胞菌(Pseudomonas fluorescen,简称pf菌)与Fe0微粒构建Fe0/pf菌联合体系,处理了含偶氮类染料-直接耐晒黑(C.I.Direct black 19,简称DB19)废水.在中温((35±2)℃)条件下,比较了纯pf菌、纯Fe0微粒和Fe0/pf菌联合体系的脱色能力,并探讨了联合体系中供氧条件、初始pH值、Fe0投加量和染料初始浓度等因素对DB19脱色的影响.结果表明,在微需氧、菌接种量为5％(体积比)的条件下,染料初始浓度为100 mg·L-1、初始pH =7.0、Fe0投加量为500 mg·L-1时,联合体系内脱氢酶活性最高,处理约30 h后可实现90％以上的脱色率;与纯pf菌比较,Fe0/pf菌联合体系达到该脱色率的时间可提前约40 h.UV-vis和FT-IR光谱分析表明,联合体系中DB19染料的脱色过程是通过偶氮键断裂来实现的,而且部分含苯环或萘环结构的中间产物也可被降解.