有机物多相光催化降解反应中催化剂固定化技术研究

以ＴｉＣｌ４和异丙醇为原料,通过化学反应将钛组分以键合方式引入载体多孔硅胶颗粒的表面,经高温处理提高活性,制备出的催化剂以甲基检溶液的脱色反应有很好的光催化活性,与相同量的粉末ＴｉＯ２作用相比,活性升高,经分析测定催化剂颗粒上有３１．０５％的钛成分且表面仍保持硅胶颗粒的骨架结构,具有大比表面和高分散性的优点,利用该方法即可以制备大颗粒载体型ＴｉＯ２催化剂,也可能进一步解决用于实际太阳光废水处理装置     

Insight into the adsorption of tetracycline onto amino and amino–Fe functionalized mesoporous silica: Effect of functionalized groups

In order to study the influences of functionalized groups onto the adsorption of tetracycline (TC), we prepared a series of amino and amino–Fe^3 + complex mesoporous silica adsorbents with diverse content of amino and Fe^3 + groups (named N,N-SBA15 and Fe-N,N-SBA15). The resulting mesoporous silica adsorbents were fully characterized by X-ray powder diffraction, Fourier transform infrared spectrometer and N₂ adsorption/desorption isotherms. Furthermore, the effects of functionalized groups on the removal of TC were investigated. The results showed that the periodic ordered structure of SBA-15 was maintained after modification of amino/Fe^3 + groups. The functionalized amino groups decreased the adsorption capacity while the coordinated Fe^3 + increased the adsorption capacity. The adsorption kinetics of TC fitted pseudo-second-order model well and the equilibrium was achieved quickly. The adsorption isotherms fitted the Langmuir model well and with the Fe^3 + content increased from 3.93% to 8.26%, the Q_max of the adsorbents increased from 102 to 188 mmol/kg. The solution pH affected the adsorption of TC onto amino complex adsorbents slightly while influenced the adsorption onto Fe-amine complex adsorbents greatly. The adsorption of TC on SBA15 and N,N-SBA15 may be related to the formation of outer-sphere surface complexes, while the adsorption of TC onto Fe-N,N-SBA15 was mainly attributed to the inner-sphere surface complexes. This study could offer potential materials that have excellent adsorption behavior for environmental remediation and suggested useful information for the preparing other adsorbents in environmental applications.     

大亚湾海域营养盐的季节变化及微表层对营养盐的富集作用

于2007年5月～2008年4月对大亚湾海域微表层、次表层和底层氮(N)、磷(P)、硅(Si)营养盐进行了每月一次的周年调查和比较分析.结果表明,大亚湾海域营养盐含量较前期调查略有上升,可溶性无机氮(DIN)、可溶性无机磷(DIP)、可溶性硅酸盐(DSi)的平均值分别为8.93、0.41和9.41μmol·L-1,养殖...     

Stabilization of Fe0 nanoparticles with silica fume for enhanced transport and remediation of hexavalent chromium in water and soil

Effective in situ remediation of Cr(VI) in groundwater requires the successful delivery of reactive iron particles to the subsurface. Fe0 nanoparticles (20–110 nm diameter) supported on silica fume were synthesized by borohydride reduction of an aqueous iron salt in the presence of a support material. The experimental result showed that attachment of Fe0 nanoparticles on the commercial available sub-micrometer silica fume prevented them from aggregation while maintaining the particle reactivity. When the Fe0 concentration was 0.4 g/L, 88.00% of 40 mg/L Cr(VI) was removed by silica fume-supported Fe0 nanoparticles (SF-Fe0) in 120 min, 22.55% higher than unsupported Fe0. Furthermore, transport experiments confirmed that almost all unsupported Fe0 was retained, whereas 51.50% and 38.29% of SF-Fe0 were eluted from the vertical and horizontal sand column, respectively. Additionally, the effect of solution ionic strength on the transport ability of SF-Fe0 was evaluated. The result showed that increase in the salt concentration led to a decrease in the mobility and also the divalent ion Ca2+ had a greater effect than that of monovalent ion Na+.     

白炭黑补强氟硅橡胶热空气老化机理研究

目的研究热空气老化过程中白炭黑补强氟硅橡胶的老化机理。方法开展不同加速老化温度点下白炭黑补强氟硅橡胶热空气老化试验,对老化过程中材料的力学性能进行研究,同时采用热重分析、衰减全反射红外光谱、交联密度分析以及固体核磁等技术,对200℃热空气老化过程中材料的微观结构变化进行分析。结果低温环境中白炭黑氟硅橡胶拉伸强度和扯断伸长率变化较小,高温环境中变化趋势增大,邵尔A硬度在整个老化过程中没有明显变化。结论白炭黑补强氟硅橡胶的老化机理主要是交联键的断裂和侧链三氟丙基的分解,同时还可能伴随有部分主链的破坏。     

赋磁硅气凝胶的制备、表征和吸附异狄氏剂特性

以工业水玻璃为硅源,采用六甲基二硅胺烷(HMDZ)作为改性剂,掺杂纳米级Fe3O4,通过溶胶-凝胶、常压干燥技术,制备得到赋磁硅气凝胶吸附材料(MSA)。采用红外光谱(FTIR)、扫描电镜(SEM)、比表面分析(BET)及振动样品磁强计(VSM)等方法对其结构进行了表征,并对其吸附性能进行研究。结果表明,制得的赋磁硅气凝胶接触角在113°～116°之间,比表面积可达589.79 m2/g,密度约为0.192 g/cm3,饱和磁化强度约为0.44 emu/g,具有超顺磁性。赋磁硅气凝胶对疏水性有机物异狄氏剂表现出良好的吸附性能,符合Freundlich等温吸附模型,KF为42.91;吸附动力学符合准二级动力学模型,吸附速率常数为0.0341 g/(mg.min)。     

锰锌铁氧体/SiO_2复合磁性材料的制备和表征

以正硅酸乙酯(TEOS)作为包覆材料,对锰锌铁氧体纳米颗粒进行SiO2包覆,制备出锰锌铁氧体/SiO_2复合磁性材料。利用FTIR,XRD,SEM等技术对其进行了表征,并研究了其对模拟亚甲基蓝废水的吸附脱色效果。实验结果表明:当SiO_2质量分数为40%1时,采用先将锰锌铁氧体在柠檬酸溶液中搅拌分散3 h后,加人氨水调节溶液pH,再继续搅拌分散3 h的分段分散方法制备的复合磁性材料对亚甲基蓝废水的处理效果更好,处理亚甲基蓝质量浓度为50 mg/L、COD为160 mg/L的废水,废水脱色率为97.2%,COD去除率为19.3%。表征结果显示:复合磁性材料锰锌铁氧体/SiO_2为球形颗粒,平均粒径为100 nm;SiO_2包覆前后锰锌铁氧体的晶型均为尖晶石型结构,在复合磁性材料中SiO_2以无定型的形态存在。     

超稠油污水深度处理工艺技术

针对辽河油田超稠油污水的特点设计了处理工艺流程,进行了药剂的筛选,根据各工艺设备的出水水质要求确定了合适的净水剂、除硅剂、阻垢剂的加量,并进行了现场实际应用,外输出水达到锅炉给水指标要求,用于锅炉注汽使用,效果良好,分析了该超稠油污水处理技术的特点和优势,提出了超稠油污水回用锅炉的建议。     

一起双氧水储罐爆炸事故的原因调查

错将水玻璃加到双氧水中,致使双氧水储罐爆炸,炸飞的罐体挂断供电线路,全厂断电停产23 h,经济损失100多万元,无人员伤亡.     

Comparative study of solar-powered water production from atmospheric air using different desiccant materials

In this paper, experiments have been performed in order to determine the quantity of water produced from the atmospheric air using different desiccant materials named Silica gel, Activated alumina and Molecular sieve 13 X. On the bases of experimental results, a correlation is derived among the different temperatures and water production using Central Composite Design (CCD) of Response Surface Methodology. A newly designed solar glass desiccant box type system (SGDBS), three in number, has been used. Design parameters for the production of water has been taken as depth of material from the glass is 0.22 m, inclination in angle as 30°, effective thickness of glass as 3 mm and number of glazing as single. It has been found experimentally that the maximum quantity of water produced by Silica gel, Activated alumina and Molecular sieve 13 X is 160, 20 and 35 ml/kg/day, respectively. Whereas theoretically, value of water produced by the Silica gel, Activated alumina and Molecular sieve 13 X is 600, 28 and 60 ml/kg/day, respectively.