Preparation of organically functionalized silica gel as adsorbent for copper ion adsorption

A novel adsorbent (AMPS-silica) was synthesized by bounding AMPS (2-acrylamido-2-methylpropanesulfonic acid) onto silica surface, which functioned with -methacryloxypropyltrimethoxysilane reagent. The adsorbent was characterized by nitrogen adsorption/ desorption measurement, thermogravimetric analysis (TGA) and potentiometric titration analysis. The TGA result indicated that the surface modification reactions introduced some organic functional groups onto the surface of silica. The surface area of AMPSsilica was 389.7 m2/g. The adsorbent was examined for copper ion removal in series of batch adsorption experiments. Results showed that the adsorption of Cu2+ onto AMPS-silica was pH dependent, and the adsorption capacity increased with increasing pH from 2 to 6. The adsorption kinetics showed that Cu2+ adsorption was fast and the data fitted well with a pseudo second- order kinetic model. The adsorption of Cu2+ onto AMPS-silica obeyed both Freundlich and Langmuir isotherms, with r2 = 0.993 and r2 = 0.984, respectively. The maximum Cu2+ adsorption capacity was 19.9 mg/g. The involved mechanism might be the adsorption through metal binding with organic functional groups such as carboxyl, amino and sulfonic groups. Cu2+ loaded on AMPS-silica could be desorbed in HNO3 solution, and the adsorption properties remain stable after three adsorption-desorption cycles.     

利用高硅铁尾矿制备氧化铁及二氧化硅微粉

采用酸浸法处理高硅铁尾矿,制备工业原料Fe2O3和SiO2微粉.最佳工艺条件为:反应温度100℃,反应时间90 min,铁尾矿中位粒径6.19 μm,盐酸体积分数60％.在上述最佳条件下,制备的SiO2产率(所得产品中SiO2的质量占原铁尾矿中SiO2质量的比例,下同)达98.2％,品质达到YB/T 115-2004《...     

硅胶复合材料吸附重金属汞的研究进展

针对高毒性、易累积的重金属汞污染物,介绍了对硅胶基底材料进行化学改性的方法,从液相和气相两方面详述了硅胶复合材料(包括有机官能团改性硅胶材料和无机磁性硅胶复合材料)在汞吸附分离领域的研究和应用进展,分析了现有研究的不足之处,并对该领域未来的研究方向提出了建议。指出,研制出高效、高选择性、高稳定性、易回收的汞吸附剂是治理工业废水和燃煤烟气中汞污染的关键。     

Deep bed filtration of anaerobic cattle manure effluents with natural zeolite

Abstract

This study was carried out in a pilot plant for the treatment of anaerobic cattle manure waste. The pilot plant consisted of a semicontinous anaerobic reactor, a settling tank, a filtration process and an ionic exchange column. The study was focused on the filtration process, with natural zeolite as filtering material. In the filtration process different media sizes of natural zeolites packed in columns were tested. The ranges of media size were 0.4 ‐ 1.0, 1.0 ‐ 3.0 and 3.0 ‐ 5.0 mm. Filtration systems operated by gravity flow from 2 to 10 m³m^‐2h^‐1. The process control was done by assays of solids, turbidity, total and soluble COD, ammonium and orthophosphate. The results showed a better behaviour in the filters packed with a media size range between 1.0 and 3.0 mm, operating at 7 m³m^‐2h^‐1, principally when effluent gross particles were previously retained in an Heterogeneous Media Filter, operating at 4 m³m^‐2h^‐1. The head losses diagrams in the filter runs were obtained, at each operational conditions. The hydraulic behaviour of traditional silica sand and natural zeolite beds were compared at the same operational conditions.     

Biogenic silica in intertidal marsh plants and associated sediments

Biogenic silica (BSi) contents in the marsh plants (Phragmites australis, Scirpus mariqueter and Spartina alterniflora) and associated sediments in Chongming Island eastern intertidal flat of the Yangtze Estuary were determined. The BSi contents in P. australis, S. mariqueter and S. alterniflora varied from 25.78–42.74 mg/g, 5.71–19.53 mg/g and 6.71–8.92 mg/g, respectively. Over the entire growth season, P. australis and S. mariqueter were characterized by linear accumulation patterns of BSi. The aboveground biomass (leaves and culms) of the marsh plants generally contained more BSi than underground biomass (roots). BSi contents were relatively higher in dead plant tissues than in live tissues which was probably due to the decomposition and the leaching of labile components of plant tissues such as organic carbon and nitrogen. Comparing with the habitats of S. mariqueter and S. alterniflora, the highest BSi content was recorded in sediments inhabited by P. australis, with an annual average of 15.69 mg/g. Overall, the intertidal marshes in the Yangtze Estuary may act as a net sink of BSi via plant uptake and sedimentary burial.     

海南岛干季化学风化产物输出及其控制因素

根据2014年1月实测的海南岛昌化江径流化学组成,运用物质平衡法和相关分析法估算化学径流组成的来源和控制因素,探讨流域化学风化产物HCO_3~-和溶解性硅(DSi)的输出及生态环境意义。结果表明昌化江流域水体呈中偏弱碱性,化学径流组成阴离子以HCO_3~-为主,阳离子以Ca~(2+)、Na~+为主。其中,77.30%的离子源于流域内硅酸盐岩的化学风化,1.38%的离子来源于碳酸盐岩风化,大气沉降对化学径流的贡献为5.45%,人类活动对干、支流化学径流的贡献分别为15.90%与21.04%,差异显著(P0.01)。地貌条件、岩性及径流深度是影响流域化学径流组成的关键因素。昌化江流域干季输入南海的HCO_3~-和DSi量分别为2.12×10~8 mol、1.38×10~8 mol,是南海海洋生态系统初级生产力的主要物质来源之一,在南海生态系统物质循环预算中不可忽视。     

导弹用高硅氧/酚醛结构件贮存寿命评估

目的 评估弹上高硅氧/酚醛玻璃钢结构件在25℃条件下的贮存寿命.方法 针对弹上高硅氧/酚醛玻璃钢结构件,开展90、110、130、150℃4个温度水平的加速老化试验,分析玻璃钢结构件的性能变化规律,建立半经验数学模型,利用阿罗尼乌斯模型评估其在常温下的贮存寿命.结果 高硅氧/酚醛玻璃钢结构件的初始弯曲强度为181.2 ...     

负载型TiO2固定相光催化降解水中偏二甲肼

以多孔硅胶为载体，采用简单工艺制得的负载型化剂ＴｉＯ２，经实验证明，具有催化活性良好，性能稳定，不易脱落，可重复使用等优点，在紫外光条件下降解水中偏二甲肼，光照２h降解率达到６５％，通入空气，加入Ｃｕ＾２＋Ｈ２Ｏ２等都有利于偏二甲肼的降解，光照２h的降解率分别提高到７０％。９０％和９５％。     

电絮凝法去除SAGD工艺高温采出水中的硅

采用电絮凝法,以新疆油田蒸汽辅助重力泄油(SAGD)工艺高温采出水为研究对象,考察了电流、反应时间、反应温度和初始pH等实际生产中较为可控的工艺条件对电絮凝除硅效果的影响.实验结果表明:在1.0 L的反应器中,反应时间不少于4 min,电流不小于0.8 A,即可达到较好的除硅效果,过大的电流无法提高电絮凝除硅能力;反应...     

柱色谱法批量分离N-甲基-2-(3-硝基苯基)吡咯烷[3’,4’:1,2][60]富勒烯研究

经C60、N-甲基甘氨酸和间硝基苯甲醛反应得到N-甲基-2-(3-硝基苯基)吡咯烷[3′,4′∶1,2][60]富勒烯(MNPF)反应液,旋转蒸发干燥得质量分数为23%的MNPF粗品,采用柱色谱法批量分离其中的MNPF。确定了柱色谱法批量分离MNPF的最佳工艺条件:二硫化碳为流动相,柱层析用硅胶(37~48μm)为固定相,色谱柱直径5cm,高径比为6∶1,最大上样量为23 g。此时分离所得MNPF纯度达99%,回收率为92.3%。