过氧化氢酶活性及活性抑制的紫外分光光度测定

在体内实验条件下，测定了鲤鱼肝脏过氧化氢酶的活性。实验结果表明，过氧化氢酶的紫外分光光度法是可靠的，活性抑制结果表明，对－二硝基苯对鲤鱼肝脏过氧化氢酶无有明显的抑制作用。鲤鱼肝脏过氧化氢酶可作为一项指标用于生态毒理学研究。     

碳氮比对低温投加介体生物反硝化脱氮的影响

污水的生物脱氮效果受低温抑制,投加氧化还原介体有利于反硝化过程。采用规格相同的序批式反应器,使用人工配制硝酸盐废水和经过驯化的活性污泥,考察了不同碳源浓度(碳氮比)对低温(10 ℃)投加氧化还原介体1, 2-萘醌-4-磺酸(NQS)污水生物反硝化脱氮过程的影响。结果表明：当碳源浓度(以COD计)为150~400 mg·L⁻¹ (碳氮比为1.8~4.7)时,脱氮效率随碳氮比的升高而升高;当碳源浓度为400~550 mg·L⁻¹ (碳氮比为4.7~6.5)时,脱氮效率随着碳氮比的升高而降低;当碳源浓度为400 mg·L⁻¹ (碳氮比为4.7)左右时效果最好,总氮去除率最高为64.7%。对于脱氮速率,介体强化脱氮速率随着碳氮比的升高而升高。同时,探讨了投加介体污水生物反硝化脱氮的机理,发现投加介体降低了体系的氧化还原电位(ORP),有利于反硝化脱氮反应的进行。     

染整废水处理工程设计

采用“生物接触氧化 +混凝气浮 +生物炭”工艺处理染整废水 ,COD去除率可达到 90 %以上 ,工程实践表明 ,该工艺处理效果好 ,运行稳定 ,投资省 ,处理后出水可达标排放     

Evaluating unintended consequences of intentional species introductions and eradications for improved conservation management

Increasingly intensive strategies to maintain biodiversity and ecosystem function are being deployed in response to global anthropogenic threats, including intentionally introducing and eradicating species via assisted migration, rewilding, biological control, invasive species eradications, and gene drives. These actions are highly contentious because of their potential for unintended consequences. We conducted a global literature review of these conservation actions to quantify how often unintended outcomes occur and to elucidate their underlying causes. To evaluate conservation outcomes, we developed a community assessment framework for systematically mapping the range of possible interaction types for 111 case studies. Applying this tool, we quantified the number of interaction types considered in each study and documented the nature and strength of intended and unintended outcomes. Intended outcomes were reported in 51% of cases, a combination of intended outcomes and unintended outcomes in 26%, and strictly unintended outcomes in 10%. Hence, unintended outcomes were reported in 36% of all cases evaluated. In evaluating overall conservations outcomes (weighing intended vs. unintended effects), some unintended effects were fairly innocuous relative to the conservation objective, whereas others resulted in serious unintended consequences in recipient communities. Studies that assessed a greater number of community interactions with the target species reported unintended outcomes more often, suggesting that unintended consequences may be underreported due to insufficient vetting. Most reported unintended outcomes arose from direct effects (68%) or simple density-mediated or indirect effects (25%) linked to the target species. Only a few documented cases arose from more complex interaction pathways (7%). Therefore, most unintended outcomes involved simple interactions that could be predicted and mitigated through more formal vetting. Our community assessment framework provides a tool for screening future conservation actions by mapping the recipient community interaction web to identify and mitigate unintended outcomes from intentional species introductions and eradications for conservation.     

生产性IC反应器厌氧颗粒污泥的生物学特征

IC反应器以絮状污泥接种用于处理酒糟废水,运行至第180d时分别测定反应器第1、第2反应室颗粒污泥的VSS、产甲烷活性、胞外多聚物和辅酶F420等各项生物学指标。结果表明反应器内颗粒污泥具有较强活性,反应器COD去除率基本稳定在95%以上,出水COD不超过1000mg/L。     

三相生物流化床处理含油废水的试验研究

我国油田含油废水利用传统的隔油、混凝、过滤（老三套）处理工艺,出水指标达不到国家的二级排放标准。为提高含油废水处理水平,在“老三套”基础上添加了生物处理部分,即三相生物流化床。为强化生物处理,采取了投加漂浮填料和悬浮填料的强化处理措施,出水能达到国家二级排放标准。     

两段进水生物膜法OOA-MBR工艺强化生物脱氮

开发出一种两段进水生物膜法好氧/好氧/缺氧-膜生物反应器（OOA-MBR）强化生物脱氮工艺,以模拟生活污水为研究对象,重点考察了流量分配比、曝气方式和水力负荷等因素对系统运行效果的影响,并对工艺控制参数进行了优化。实验结果表明,在系统HRT 4.8 h,流量分配比为1：1,后置MBR池曝气方式采取Air-on 4 min/Air-off 6 min模式,进水COD（380±20）mg·L-1、NH4+-N（35±5）mg·L-1、TN（35±5）mg·L-1时,出水COD、NH4+-N和TN去除率分别达到93.9%、91.8%和77.7%,出水水质满足《城镇污水处理厂污染物排放标准》（GB 18918-2002）一级A标准。     

载体内微孔孔径对生物膜特性及废水处理效果的影响

为解决载体內部微孔孔径在废水生物膜法中缺乏选型依据的问题,采用5种孔径(0.6~4 mm)聚氨酯海绵生物载体构建了SBBR,考察了载体内微孔孔径对生物膜特性(MLSS、EPS、DHA)及废水处理效果的影响,分析了载体内部微孔孔径与生物膜特性的相关性。结果表明：载体内微孔孔径与MLVSS、MLSS呈显著负相关,而与PN、PS、EPS和f呈显著正相关;高生物量使小孔径载体(0.6 mm,1 mm)在反应器运行前中期拥有最佳的废水处理效果,同时过多的生物膜在微孔环境中会堵塞内部的通道和空穴,进而抑制传质,使生物膜活性(DHA、f )降低;而大孔径载体(4 mm)内部传质快、水力剪切作用强,加速生物膜解吸脱落速率,促进了生物膜活性的提高与EPS(主要是TB-EPS)的释放,但同样限制了生物膜量的增长。相较而言,中等孔径载体(2 mm,3 mm)适宜的微孔不仅能维持适量的微生物量,还能保持良好的生物膜结构和活性,为生物膜反应器提供良好的长期运行条件和处理效果。     

氧化铁改性砂联合生物预处理对氨氮的吸附特性

对含氨氮(NH3-N)的微污染原水,采用自制氧化铁改性石英砂(iron oxide coated sand,IOCS)滤料强化过滤与生物预处理技术联合,进行强化处理与吸附效果研究.结果表明,采用强化挂膜法,生物预处理反应器的生物膜成熟期约为7 d,其对氨氮的去除率为60%~70%,但反应器中存在亚硝酸盐氮积累的现象.IOCS与生物预处理技术联合,对NH3-N的平均去除率为84.67%,出水NH3-N浓度均低于0.5 mg/L,NO2--N含量趋于0;而普通石英砂(RQS)在同等条件下,对氨氮的去除效果不稳定,平均去除率为74.31%,出水NH3-N平均浓度未达标,对NO2--N平均去除率仅有33.29%.在4 m/h滤速工况下,与生物预处理技术联合,IOCS和RQS对NH3-N最高去除率分别为94.3%和82.72%.IOCS与RQS的表面形态结构存在明显差异:前者的表面结构更加复杂多孔,比表面积大,有利于生物牢固附着;后者表面较光滑,比表面积小,挂膜后生物易脱落.     

Dissolution behavior of metals from particulate matter emissions

Exposure to air particulate matter (PM) is linked to numerous health effects. In order to improve the understanding of the role of its metallic components, their solubility was examined by using serial short-contact dissolutions totalling 1?h and additional sequential contact periods of 1, 4, and 8 days. The dissolution experiments were performed in solutions containing the main biological electrolytes. ICPMS determinations were used to quantify the dissolved metals. The total compositions were determined after closed vessel microwave digestion. Large variations in the rate and completeness of the dissolutions were observed. Fast and extensive dissolutions within the short-contact time (e.g., Zn, Cd) as well as slow dissolutions persisting during the last contact period (e.g., Ni, Cu, Sb, Pb) were found for smelting emissions. The multi-element determinations also made it possible to identify relationships between dissolution of different metals and define gradual composition changes of residual PM. When comparing with dissolutions performed in de-ionized water, similar major fractions were observed at short-contact time for minor components of smelting or combustion emissions (e.g., V, Ni, Cd), suggesting a preponderance of easily available forms at the surface of the relatively inert particle cores. The use of these time sequential methods may help in (1) modeling metal partitioning in biological media and (2) investigating the causes of adverse effects attributed to air PM.