Tuning the fill percentage in the hydrothermal synthesis process to increase catalyst performance for ozone decomposition

The performance of Ce-OMS-2 catalysts was improved by tuning the fill percentage in the hydrothermal synthesis process to increase the oxygen vacancy density. The Ce-OMS-2 samples were prepared with different fill percentages by means of a hydrothermal approach (i.e. 80%, 70%, 50% and 30%). Ce-OMS-2 with 80% fill percentage (Ce-OMS-2-80%) showed ozone conversion of 97%, and a lifetime experiment carried out for more than 20?days showed that the activity of the catalyst still remained satisfactorily high (91%). For Ce-OMS-2-80%, Mn ions in the framework as well as K ions in the tunnel sites were replaced by Ce⁴⁺, while for the others only Mn ions were replaced. O₂-TPD and H₂-TPR measurements proved that the Ce-OMS-2-80% catalyst possessed the greatest number of mobile surface oxygen species. XPS and XAFS showed that increasing the fill percentage can reduce the AOS of Mn and augment the amount of oxygen vacancies. The active sites, which accelerate the elimination of O₃, can be enriched by increasing the oxygen vacancies. These findings indicate that increasing ozone removal can be achieved by tuning the fill percentage in the hydrothermal synthesis process.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

尕海湿地植被退化过程中有机碳及相关土壤酶活性变化特征

以青藏高原东缘尕海湿地不同植被退化程度样地为研究对象,采用定位研究与室内试验相结合的方法,研究植被退化过程对土壤有机碳和土壤酶活性的影响。结果表明：植被退化显著影响土壤有机碳含量和土壤酶活性,降低了土壤有机碳的含量和酶促反应效率,且这种影响随土层深度变化有所不同。四种植被退化阶段有机碳含量和酶活性均值总体上（0~100 cm）表现为未退化>轻度退化>中度退化>重度退化。不同土层中,20~40 cm土层的有机碳含量中度退化>轻度退化;0~10 cm土层中淀粉酶和纤二糖酶中度退化阶段活性值较高;20~100 cm土层中蔗糖酶重度退化阶段活性值最高,纤二糖酶活性重度退化>中度退化。同一退化程度土壤有机碳含量、蔗糖酶和纤二糖酶活性随土层深度增加显著降低（P<0.05）;淀粉酶和纤维素酶活性在>40 cm土层中活性值有所上升,整体呈波动下降趋势。     

珠江口夏季海陆源有机碳的模拟研究——分布特征、贡献比重及其迁移转化过程

基于经过验证的三维水动力-水质模型,对珠江口夏季有机碳进行海陆源区分,并对海陆源有机碳的分布特征、贡献比重及其通量过程进行研究.结果表明,水平方向上,珠江口夏季陆源（海源）有机碳浓度从口门到外海逐渐降低（升高）,在表、底层海水中平均浓度分别为1.45和0.87mg/L（0.97和1.05mg/L）;垂直方向上,在层化水域陆源（海源）有机碳浓度从上到下逐渐递减（升高）,在非层化水域海陆源有机碳浓度垂向分布较为均匀.珠江口夏季海源有机碳贡献率表层海水低于底层海水,平均贡献率为48.26%,沿向海方向海源有机碳贡献率逐渐增加--从内伶仃洋水域的4.43%逐渐提升到外伶仃洋东侧水域的81.20%.珠江口水动力条件复杂,在径流、潮汐、季风等因素的作用下陆源有机碳向海输送且向海输送量逐渐递减;海源有机碳在不同水域动力输送特征不同,西南水域向海输送,向海输送量逐渐递增;东北水域向岸输送,向岸输送量逐渐递减.陆源有机碳生化反应活性较弱,只有小部分被生化过程消耗,其迁移转化主要由沉降过程控制,而海源有机碳的迁移转化,则由口门的动力输送过程主控向外海的生化耗碳过程主控过渡.此外,海源有机碳沉降作用明显低于陆源有机碳,生化作用明显高于陆源有机碳.     

三江源植被碳利用率动态变化及其对气候响应

本文基于MODIS GPP/NPP数据估算了三江源植被碳利用率（CUE）,结合气象数据和高程数据采用一元线性回归和相关分析法,探讨了2001~2017年三江源植被CUE的时空变化特征及植被CUE对气温、降水量和蒸散量变化的响应.结果表明：（1）三江源植被CUE年内3~10月表现为先增加后降低的变化趋势,其中6月植被CUE最高.（2）三江源年植被碳利用率位于0.73~1,平均水平为0.85;植被CUE空间上呈现北高南低,西高东低的分布特征.（3）整体上,三江源4~10月植被碳利用率与同期气温、降水量和蒸散量分别呈现正相关、负相关和负相关关系,降水量是影响三江源植被CUE变化的主要影响因素,气温为次要因素,蒸散量影响程度最小.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.     

北京市气温与黑碳和PM2.5对疾病死亡影响的交互效应

通过收集北京市2010~2016年逐日呼吸和心脑血管疾病死亡数据、污染物（BC、PM_2.5、SO₂、O₃和NO₂）日均浓度资料以及同期的气象资料,采用广义相加模型（GAMs）中的主效应模型、非参数二元响应模型和温度分层模型探讨了北京市气温、PM_2.5和BC单效应,以及气温与PM_2.5和BC交互作用分别对呼吸和心脑血管疾病死亡人数的影响.单效应分析结果表明,气温与两种疾病死亡人数的累计暴露-反应关系均呈“J”型分布特征,最适温度为24℃;累计滞后一天情况下PM_2.5和BC的健康效应均最显著,此时PM_2.5和BC浓度每升高四分位间距（IQR）,呼吸系统疾病死亡人数超额增加百分比（ER）分别为2.21%和1.80%,心脑血管疾病死亡人数ER分别为2.02%和1.48%.交互作用的研究结果表明,高温与高浓度的PM_2.5（或BC）对疾病死亡的影响存在协同效应,且高温条件下BC对疾病死亡影响的健康风险大于PM_2.5,当气温大于24℃时,BC和PM_2.5浓度每升高IQR对应的呼吸系统疾病死亡人数ER分别为6.22%和6.17%,心脑血管疾病死亡人数ER分别为5.01%和3.97%.虽然BC只占PM_2.5的一部分,但BC对人群健康的影响不容忽视,应该引起足够的重视.     

磁性有序介孔碳的制备及其对水中双酚A的吸附

采用水热法成功制备了磁性有序介孔碳（Fe-OMC）,用于吸附水中双酚A （BPA）.采用高倍投射电镜、X射线衍射仪、傅里叶红外光谱仪、比表面积分析仪和振动样品磁强计对Fe-OMC进行表征.结果表明,该吸附剂具备较大的比表面积、独特的有序介孔孔道结构、丰富的含氧官能团以及较强的超顺磁性.Fe-OMC能够高效地吸附去除水中的BPA,平衡吸附量可达72.62mg/g,经过外加磁场分离回收后依旧具备较好的吸附性能.随着BPA浓度从1mg/L提高到20mg/L,其平衡吸附量由8.33mg/g增至91.78mg/g.随着pH值的升高呈现出先降低后升高再降低的趋势,最高吸附量出现在pH=8（75.34mg/g）.Fe-OMC对BPA的吸附过程可用准二级吸附动力学模型和Langmuir吸附等温模型进行描述.计算的热力学参数表明,Fe-OMC对BPA的吸附过程是自发进行的放热过程.     

乙醇汽油对国六直喷汽油车排放特性的影响

选择5台国六直喷汽油车采用3种不同组分的E10乙醇汽油和1种不含含氧化合物的国VI汽油,按照国六排放标准开展了WLTC循环测试,研究乙醇和基础油组分对污染物排放的影响规律.结果表明,多数国六直喷汽油车的CO、THC和PM排放有所降低,NO_x排放无明显差异,PN排放微增,所有样车的CO、THC和PM平均排放降低为6%、7%和14%.E10乙醇汽油中的重质芳香烃含量增高时,PN排放明显增加,PN排放与PMI指数呈现较强的正相关关系.     

石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。