单柱阳离子色谱快速分析白云石中高含量钙镁

采用离子色谱法同时测定白云石中高含量钙镁,该法与目前使用的络合滴定法相比,具有准确可靠、操作简便快速、无干扰等特点。对样品测定取得了满意的结果,氧化钙与镁瓣含量分别为３１．９９％和２１．４７％,相对标准偏差分别为０．８１％和０．６５％,平均回收率分别９９．９％和１０２％。     

三峡库区典型消落带冬季多环芳烃大气-植物/土壤交换过程与通量

三峡大坝每年周期性“蓄水-放水”,形成水位落差巨大的消落带,库区内污染物环境地球化学行为随之发生变化.以冬季淹没期消落带多环芳烃为研究对象,采集成对大气(n=16)、植物(n=12)和土壤样品(n=12),采用气相色谱/质谱法(GC/MS),分析USEPA 16PAHs浓度水平,解析来源,估算大气地表、大气-植物等多介质交换通量.结果表明:大气、土壤和植物中PAHs浓度为5.65～13.47ng/m³、70.86～13 5.44ng/g和78.23～1084.72ng/g,平均值分别为(8.58±2.78) ng/m³、(90.10±22.18) ng/g和(360.36±309.54) ng/g.大气中PAHs以2～3环为主(62.3%),植物中PAHs以3～4环为主(73.7%),土壤中PAHs以3环和5环为主(52.1%).特征分子比值法揭示煤、生物质燃烧是植物PAHs的主要来源,以石油为主的化石燃料燃烧是大气和土壤PAHs主要来源.“一室模型”表明,植物吸收PAHs的主要途径为植物-气相之间动态平衡限制下的气沉降.“逸度模型”表明,3...     

水环境监测信息集成、共享与决策支持平台构建

以水环境监测数据可靠传输交换与集成、信息规范化处理分析、高效共享与决策支持为应用主线,对水环境监测信息集成、共享与决策支持平台的建设目标、总体架构、主要功能进行了研究,设计了平台的总体架构及主要功能,以实现涉水部门水环境信息的采集、传输、交换、存储、分析、发布、共享、展现等,为环境管理与决策人员、为公众、为各级(国家级流域级省级地市级县级)环境监测业务人员提供信息支撑。     

PAN-S树脂富集钴的分光光度法测定研究

研究了PAN—S浸渍树脂对Co^2＋的吸附性能。Co^2＋吸附pH值范围为4．7—9．2,最佳pH值为5．4;达到最大吸附容量需25min,树脂对Co^2＋平衡吸附容量是98mg／g干树脂,达到最大吸附容量平衡时用0．1mol／L的HNO,洗脱,洗脱率达98％。该方法建立了PAN—S-树脂富集一分离钴离子的分光光度测定方法,结果令人满意。     

处理含硫废水的新型催化剂

合成了适合处理含硫废水的固相催化剂,考察了催化剂的稳定性、活性及对实际废水的处理效果,开了含硫废水处理的一条新途径。     

高含盐废水脱盐处理技术研究进展

综述了几种常见的高含盐废水脱盐处理技术的发展历程、工艺原理、优缺点及目前的研究进展,分析了热分离、膜分离、电渗析、离子交换、电吸附、微生物脱盐等方法的优缺点,展望了未来废水脱盐工艺的发展方向。指出：脱盐方法将根据各类水体的水质特点更加精细化;多种脱盐技术联合应用也是今后废水脱盐的发展方向。     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

膜电解技术处理含氯及重金属的废酸

采用离子交换膜电解技术处理铜冶炼过程产生的含氯及重金属的废酸。考察了废酸处理工艺、电解温度、电解时间、电流密度和催化剂的添加等条件对处理效果的影响。实验结果表明：采用先沉淀重金属后脱氯的废酸处理工艺,氯离子和铜离子的去除效果均较好;当以钛盐为催化剂时,在电解温度为40 ℃、电解时间为2.0 h、电流密度为825 A/m²的最佳工艺条件下,处理后废酸中的氯离子质量浓度为0.22 g/L,氯离子去除率为98.59%,铜离子质量浓度为0.45 g/L,铜离子去除率为95.08%,其他重金属大部分也得到有效去除。净化后的废酸可回用至铜冶炼的生产过程中。     

表面活性剂改性4A分子筛对Cr(VI)的吸附行为

采用浸渍法对4A分子筛进行表面改性,通过引入阳离子表面活性剂,使4A分子筛表面附着季铵型阳离子,并与反离子Br-形成"阴离子交换膜",从而促使更多的Cr(VI)阴离子通过离子交换吸附到改性4A分子筛上,通过X-射线衍射(XRD)和傅里叶变换红外光谱(FTIR)对样品的物相结构和组成进行表征分析。研究表明,表面活性剂的类型和疏水碳氢链结构会影响4A分子筛的吸附能力,十八烷基三甲基溴化铵(OTAB)碳氢链长,在分子筛表面形成的双分子层密,对Cr(VI)的吸附量最大。采用准一级、准二级、Elovich和Bangham动力学模型对六价铬的吸附数据进行拟合,其中准一级动力学方程最符合十八烷基三甲基溴化铵改性分子筛的吸附行为。同时,分别从Langmuir和Redlich-Peterson等温吸附模型获得六价铬的最大吸附量为13.98 mg/g,且改性分子筛以均一表面吸附为主。     

Hydrolysis and photolysis of oxytetracycline in aqueous solution

Oxytetracycline ((2Z,4S,4aR,5S,5aR,6S,12aS)-2-(amino-hydroxy-methylidene)-4-dimethylamino-5,6,10,11,12a-pentahydroxy-6-methyl-4,4a,5,5a-tetrahydrotetracene-1,3,12-trione) is a member of tetracycline antibiotics family and is widely administered to farm animals for the purpose of therapeutical treatment and health protection. Increasing attention has been paid to the environmental fate of oxytetracycline and other veterinary antibiotics with the occurrence of these antibiotics in the environment. The hydrolysis and photolysis degradation of oxytetracycline was investigated in this study. Oxytetracycline hydrolysis was found to obey the first-order model and similar rate constant values ranging from 0.094 ± 0.001 to 0.106 ± 0.003 day^{? 1} were obtained at different initial concentration ranging from 10 to 230 μ M. Solution pH and temperature were shown to have remarked effects on oxytetracycline hydrolysis. The hydrolysis in pH neutral solution appeared to be much faster than in both acidic and alkaline solutions. Oxytetracycline half-life decreased from 1.2 × 10² to 0.15 day with the increasing temperature from 4 ± 0.8 to 60 ± 1°C. The presence of Ca^{2 +} made oxytetracycline hydrolytic degradation kinetics deviate from the simple first-order model to the availability-adjusted first-order model and greatly slowed down the hydrolysis. Oxytetracycline photolysis was found to be very fast with a degradation rate constant at 3.61 ± 0.06 day^{? 1}, which is comparable to that of hydrolysis at 60°C. The presence of Ca^{2 +} accelerated oxytetracycline photolysis, implying that oxytetracycline become more vulnerable to sunlight irradiation after chelating with Ca^{2 +}. The photolysis may be the dominant degradation pathway of oxytetracycline in shallow transparent water environment.