Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

多环芳烃的几种理化参数与LC_(50)的相关性研究

对多环芳烃(PAHS)4种理化参数(K;W、Sw。X Vv。)与 LCO的相关关系进行了研究,建立了 4种一元线性回归方程。结果表明,4种参数的相关系数分别为:0.刀66、08083、09488、0.9570,经r检验,后两种属高度显著相关.用所建立的一元线性回归方程对7种PAHS的LC。进行估算,估算值与实测值相比,平均相对误差分别为58.84％、32.23％、1761％、198％,用l和V＊.H对LClj进行估算的估算精度也较高。经比较,提出用(。估算P＊比对麦穗鱼＊CO的新方法。     

建立港口危险化学品事故应急预案的构想

根据港口危险化学品事故的特点和产生的危害性，阐述制订港口危险化学品事故应急预案的必要性，并具体提出预案中救援防护和污染清除等方面的设想。     

销毁遗弃化学武器的环境风险评价方法研究

为履行《禁止化学武器公约》，各缔约国销毁化学武器的工作已启动。根据当前世界上化学武器的销毁情况，并针对二战期间在中国遗弃的化学武器的特点，给出了一套适应化学武器销毁流程的环境风险评价方法和技术。这套方法对将在我国进行的销毁遗弃化学武器风险评价工作有一定的实际意义。     

配煤添加剂对燃烧烟气的影响

燃煤排放的污染是造成我国大气污染的主要原因。本文分析了添加剂对煤炭燃烧的影响机理,指出配煤添加剂是改善动力煤燃烧的污染排放问题的一个可行途径。     

化工废渣(磷石膏)代替天然石膏制做水泥添加剂的研究

研制用化工废渣(磷石膏)代替天然石膏做水泥生产过程中的添加剂,其生产出的水泥质量完全可以达到国家规定的有关标准,而生产成本却明显下降,是一种处理废渣的好方法。     

碱性条件下化学法处理大同齿轮厂混合电镀废水

针对大同齿轮厂电镀车间外排废水中既含CN- 离子 ,又含Cr6+及Ni2 +、Zn2 +、Cu2 +等重金属离子的现状 ,在碱性条件下 ,采用先氧化破氰 ,再还原六价铬至三价铬 ,最后混凝沉淀的处理工艺 ,使处理后出水达标排放     

Quantitative structure-property relationship of aromatic sulfur-containing carboxylates

IntroductionItiswidelyrecognizedthatthephysicochemicalprofileoforganicchemicalslargelydeterminestheirdistributionbetweenenvironmentalmedia .Fortheenvironmentalbehaviorsoforganiccontaminants,watersolubility(SW)andoctanol waterpartitioncoefficient(KOW)aretremendouslyimportant.Octanol waterpartitioncoefficienthasbeenwidelyrelatedtobiochemicaland orbiologicalactivityinquantitativestructure activityrelationships(QSARs) (Leo ,1 971 ) .Watersolubilitycorrespondstothedispersiontendencyandtothereca…     

区域(城市)水体中主要有机毒物的筛选

本研究发展了区域(或城市)水体中主要有毒化学品的筛选方法。 在城市下游采集大体积水样,用CH_2Cl_2洗脱,再用有机溶剂萃取,用硅胶柱把有机物分成许多馏分,馏分最终变为水溶液。每个馏分中有机物浓度比原水大1000倍。用这种馏分水溶液进行溞的急性毒性试验和Ames试验。只对毒性大的馏分进行色谱/质谱/数据系统的鉴定和定量分析,然后根据各个化合物的急性毒性、降解难易和“三致”物质的资料及原水样中有机物的浓度资料,就可筛选出一个区域(城市)水体中的主要有毒化学品。