非金属矿物在废水处理中的应用研究

用矿物作为污水处理材料,具有储量丰富,方法简单,可去除水中无机和有机污染物,化学和生物性能稳定,容易再生等优点。非金属矿物具有良好的吸附和离子交换性能,在水处理方面有广阔的应用前景。本文介绍了海泡石、镁砂、沸石、膨润土等几种常见的矿物材料在有机废水、重金属废水及含油废水中的研究现状。     

Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

活性白土废水治理的实验研究

活性自土生产过程中产生大量的含微细白土颗粒的强酸性废水,处理效果一直不佳.实验改进白土生产工艺,通过粒度控制,从根本上减少白土生产过程中超细白土颗粒的产生,循环利用硫酸和洗涤水以减少成本和对环境的污染.并对影响活性自土质量的主要生产工艺条件进行了比较系统的试验研究,确定了最佳工艺条件.成功地制备了脱色率92.88%,过滤速度21.27mL/mim的高效植物油活性白土.     

不同粘土矿物材料对Pb2+的吸附特征

探讨了在不同矿物投加量、不同振荡时间、不同Pb2 浓度、不同矿物颗粒细度和不同pH条件下,钠基膨润土、膨胀蛭石和沸石3种粘土矿物对Pb2 的吸附效果.结果表明:对于具有可膨胀层间的粘土矿物而言,其对溶液中Pb2 的吸附量不仅仅由单一的阳离子交换量所决定;Pb2 在矿物表面的吸附过程是个迅速的过程,矿物对Pb2 的吸附在10 min内即可完成;粘土矿物不同颗粒细度对Pb2 的去除率有所不同,但考虑到实际应用中的成本问题,并非颗粒越细越好;就试验所采用的3种粘土矿物而言,其对Pb2 的吸附效果是,钠基膨润土和沸石明显优于膨胀蛭石;较高的pH有助于粘土矿物对溶液中Pb2 的吸附,但考虑到实际操作的其他因素,不能把pH调得过高.     

基坑开挖对临近地基极限承载的影响性状数值分析

采用弹塑性有限元分析方法,分析了悬臂式排桩支护的基坑开挖对邻近地基条形基础下极限承载力的影响性状。主要考虑了在基坑开挖深度、荷载与基坑的距离、荷载宽度、支护刚度等因素的影响下地基极限承载力的减损性状。研究表明,基坑开挖深度H较浅时,对地基极限承载力P_u的影响较小,P_u随H的增大略有降低,随着开挖深度的增加,H对P_u值的影响显著增大,且P_u值显著降低;当L/H≤2时,荷载与基坑的距离L对地基极限承载力P_u的影响很大,地基极限承载力P_u随L的减小而显著减小,当L/H>3时,L的影响逐渐减小,且P_u逐渐趋近于无基坑开挖时的值;P_u随地基荷载作用宽度B的增大而呈线性增大;支护桩的位移越小,P_u值越接近无基坑开挖时的地基极限承载力。     

有机改性粘土对赤潮藻絮凝沉降的动力学研究

采用分光光度计法和活体荧光计法,研究了吉米奇类表面活性剂双烷基聚氧乙烯基三季铵盐（DPQAC）改性粘土对2种赤潮生物赤潮异弯藻和锥状斯氏藻的絮凝沉降动力学,比较了2种实验方法的不同,并对几种影响絮凝沉降的因素进行了研究.结果表明,传统的分光光度计法进行动力学研究时,有机粘土对赤潮藻的絮凝沉降较好地符合双分子反应动力学模型,而采用活体荧光计法进行实验时,有机粘土对赤潮藻的絮凝沉降很好地符合双曲线动力学模型,利用活体荧光计法进行实验时避免了前者由于粘土沉降导致的体系透光率的快速变化,更好地反映了赤潮藻细胞絮凝沉降实质.2种动力学实验方法都表明,高岭土体系的沉降速率要略高于膨润土体系,提高粘土、改性剂的用量以及体系的pH值都能加快沉降速率,其中提高改性剂的用量是增加去除率和加快沉降速率的最有效方法.     

矿物材料对餐厨垃圾厌氧消化的影响研究

在试验的基础上研究了3种矿物材料膨润土、斜发沸石、粉煤灰对富含钠离子的餐厨垃圾厌氧消化过程的影响.结果表明,在发酵温度为35℃、底物固含量(TS)为10%、添加物用量为1%(质量分数,以消化底物计)时,膨润土、沸石粉、粉煤灰对含盐餐厨垃圾的厌氧发酵消化液中的钠离子具有良好的吸附性能,吸附率分别为13.75%、10.11%、7.99%.在未使用无机矿物的情况下,当钠离子浓度为3000～4000mg·L-1时,含盐餐厨垃圾的的厌氧消化过程受到Na 离子的明显抑制.从产气量分析,3种矿物材料均能明显促进餐厨垃圾的厌氧消化过程,与空白对照试组相比,膨润土、斜发沸石、粉煤灰分别使产气量提高了131%、82%和45%.三者对甲烷气产量的促进影响强弱顺序是,膨润土＞斜发沸石＞粉煤灰.初步讨论了这3种矿物材料提高餐厨垃圾厌氧消化甲烷产量的作用机理.     

HDTMA改性粘土吸附固定沉积物间隙水中多环芳烃的模拟研究

选用经过十六烷三甲基溴化铵(HDTMA-Br)改性的粘土矿物为吸附剂,探讨其对水中多环芳烃类有机污染物的吸附性能。结果表明,HDTMA改性土吸附固定水中多环芳烃的能力比天然沉积物要高得多且吸附稳定。本文还讨论了环境温度、pH值、盐度、振荡时间、污染物初始浓度以及投土量对吸附性能的影响以确定吸附的适宜条件。根据实验结论,将HDTMA改性土投到实际间隙水样品中,经过充分的吸附,结果显示,经HDTMA改性粘土吸附后的间隙水中多环芳烃的含量均在检出线以下,说明HDTMA改性土可以有效地吸附固定沉积物间隙水中的多环芳烃,降低其迁移性,防止其释放产生二次污染。     

黏土地层联络通道冻结壁厚度优化设计及应用研究*

为解决传统冻结壁设计方法不能真实、合理地反映黏土地层中联络通道冻结壁实际受力情况,进而导致冻结壁厚度设计过于保守的问题,结合黏土地层直墙拱形冻结壁实际受力特点,基于对冻结壁支护压力的合理计算,提出1种适用于黏土地层冻结壁厚度设计的优化方法。结果表明:与传统设计方法相比,该方法所确定冻结壁支护压力与实际施工环境中冻结壁受力状态吻合效果更好,并且能够提供合理的安全储备;经数值计算和现场应用验证,计算所得冻结壁设计方案可以满足施工环境中的承载力及变形稳定性要求;且相较传统设计方案,所得方案兼具安全性与经济性,可有效规避因设计过于保守和冻结周期过长引起的冻胀、融沉变形过大等工程灾害的风险;该方法高效、易行,可为传统冻结壁设计方法提供必要补充,亦可为类似工程的施工设计提供有益参考。     

An Experimental Methodology for Monitoring Contaminant Transport Through Geotechnical Centrifuge Models

In this paper, an attempt has been made to highlight an experimental methodology for monitoring contaminant transport through locally available silty soil and commercially available clay in geotechnical centrifuge models, for different compaction states. Use of multiple depth sensors to determine depth distribution of sodium chloride in the soil column has been detailed. The obtained results have been compared with argentometric method. To validate the centrifuge modelling, modelling of models has been used. The test setup developed can simulate contaminant transport mechanisms through the soil mass, which is approximately 10 m deep, over a period of 600 days. R _e and P _e are found to be N times higher in the centrifuge models. These numbers are found to be several orders less than unity. This indicates that laminar flow prevails and the dominating Cl⁻ transport mechanism in centrifuge is diffusion. The study also highlights the fact that the geotechnical centrifuge modelling can be used as a viable alternative to field scale experimentation.