方头柱塞冷挤镦工艺及模具设计

分析了硬铝合金方头柱塞件的冷挤镦工艺 ,设计了方头柱塞冷挤镦件图 ,计算及选用了毛坯形状及尺寸 ,验算了许可变形程度 ,选择了冷成形用的设备 ,拟制了冷挤镦工艺前的毛坯处理并设计了方头柱塞冷挤镦模具结构。     

Easurements of placental,decidual, and fetal proteins before and after chorionic villus sampling

Circulating placental [human chorionic gonadotrophin (hCG), Schwangerschafts protein 1 (SP1), pregnancy-associated plasma protein A (PAPP-A), decidual (pregnancy protein) 12 (PP12), and fetal alphafetoprotein (AFP)] proteins were measured immediately before and within 1 h in 18 women undergoing diagnostic chorionic villus sampling (CVS) in the first trimester. An elevation of serum AFP levels was consistently seen, while fluctuations in excess of 10 per cent of the pre-CVS levels of SP1 and PP12 were seen in the majority of patients. Fluctuations in hCG and PAPP-A were consistently less than 10 per cent of pre-CVS values. Post-CVS changes in levels were not apparently associated with any feature of the technique, the pregnancy, or its outcome (one missed abortion). As feto-maternal haemorrhage is a common event, anti-D should be offered to rhesus-negative women undergoing CVS. In the prediction of subsequent miscarriage, only hCG and PAPP-A measurements should be considered.     

脉冲等离子法烟气脱硫的放大实验

锅炉烟气进行脉冲等离子法脱硫的扩大实验，得到与模拟烟气实验相近的结果。研究表明，脉冲等离子法对锅炉烟气中的ＳＯ２去除率可达９５％以上，烟气在反应器内的停留时间（ｔｓ）、脉冲电源的放电功率（Ｐ）和添加ＮＨ３等条件，对脱硫效率９η）有较大影响。ｔｓ、Ｐ越大、η越高。处理烟气量（Ｑ）、能耗（Ｐ）与η存在函数关系：η＝１１８．０（Ｐ／Ｑ）＾０．１１１１。烟气中加入适量ＮＨ３，对脱硫效率有显著提高，以ＮＨ３     

冷挤压工艺智能设计中的压力计算

冷挤压力的高低是冷挤压工艺成败的关键 ,通常挤压力计算是人工完成的。文中介绍了冷挤压工艺计算机智能设计系统中的挤压力计算及其参数优化部分的软件开发方法。该方法分别介绍了数据库设计、用户界面设计、挤压力计算、工艺评价等内容     

等离子体技术处理环境污染物进展

概述了等离子体的概念、分类，介绍了冷等离子体在废气、废水、固体废弃物处理等方面的应用，讨论了存在的一些问题。等离子体技术在环保领域具有良好的发展前景。     

冷轧带钢轧辊温度场及其控制

分析了冷轧过程中工作辊的温度变化及热凸度的形成 ,提出了控制热凸度的有效手段 ,对完善板型控制系统具有重要的意义     

冷挤大型法兰面螺母的工艺研究

以大型法兰面螺母为例 ,论述了用无缝钢管冷挤大型法兰面螺母工艺的可行性     

Serum PAPP-A levels are depressed in women with fetal Down syndrome in early pregnancy

The value of maternal serum pregnancy-associated plasma protein (PAPP)-A in screening for Down syndrome in early pregnancy was assessed using stored samples. Seventeen cases of Down syndrome and 66 unaffected control pregnancies were studied. The median PAPP-A level in the cases was 0.42 multiples of the expected value in controls (p <0.0001). Eleven cases (65 per cent) had levels less than half the expected value compared with only six controls (9 per cent). A commercial assay kit is now needed so that prospective screening with this marker can begin.     

Decomposition of CF3CI by corona discharge

In this paper pulsed corona discharge is shown to be effective for the decomposition of CF₃Cl(Freon-13).The pressure of CF₃Cl was 2.67×10³Pa,after discharged for 2 min,39.5% of CF₃Cl was decomposed.The products were mainly CF₄,Cl₂ and CF₂Cl₂.The yield increased by adding O₂ or air.Under the same conditions,more than 94% decomposition yield was obtained if 5.32×10³Pa O₂ or air was added.The composition of products became CF₂O,Cl₂ and CF₄.While the partial pressure of O₂ or air reached 1 arm,the decomposition yield decreased to 54.5% and 48. 5% respectively.     

VE泵端面凸轮冷/温复合成形技术研究

采用温锻制坯与冷摆辗相结合的复合成形工艺生产VE泵端面凸轮精密成形件,不仅材料利用率可达到95%左右;而且成形件的尺寸精度高,表面光洁度高,能有效地减少后续仿形磨削加工的余量,从而降低了生产成本,提高了生产效率。采用该工艺可以进行大批量生产,能满足我国轻型汽车VE泵的生产需要。