不同墩高下连续刚构桥抗震性能分析

以某大跨连续高墩刚构桥为依托,采用Midas/civil软件建立仿真模型,通过时程分析方法研究双肢薄壁墩参数在地震响应下对高墩连续刚构桥抗震性能的影响.以桥墩高度为主要参数,以模型阵型频率、桥墩墩顶、墩底位移及内力变化三个方面对其抗震性能进行评价.研究结果表明,随着其中一个桥墩高度的增加,桥梁频率不断减小,矮墩墩底及矮...     

排土场稳定性影响因素显著性研究

为提升排土场稳定性,以某露天煤矿排土场为例,结合正交试验和强度折减法,开展排土场稳定性影响因素显著性研究.通过分析资料与野外调研,厘定典型排土场稳定性诱发因素,构建排土场真三维地质模型,反演验证和分析排土场的岩土体参数和变形规律特征,得出排土场边坡内部应力和位移的变化特征以及塑性破坏区分布范围;以真三维网格模型中最危险...     

加氢装置分液罐泄漏失效原因分析

针对某石油化工公司加氢装置中变气第一分液罐底部环焊缝周围产生多处裂纹而发生泄漏的事故,通过对该压力容器使用工作环境的工况调查、设备泄漏部位裂纹宏观分析、裂纹形态及断口理化金相分析、材质化学成分检测、焊接接头金相组织分析、材料拉伸力学性能试验和硬度测试等手段,综合分析裂纹产生的原因,得出初步结论,并提出改进建议.     

Investigative consequence analysis: A case study research of beirut explosion accident

Around 15:00 GMT on August 4th, an explosion occurred in the warehouse facility storing Ammonium Nitrate (AN) at Beirut port, Lebanon. The explosion resulted in more than 178 fatalities and injured more than 6500 people, and also left an estimated 300,000 people homeless and registered as an equivalent to a 3.3 magnitude earth quake. The accident was considered to be the largest of its kind and the most severe anthropological disaster of the decade, the financial loss the nation was subjected to post the explosion was estimated to be around $ 15 billion as informed by the governor. The storage conditions of ammonium nitrate at Beirut port is not definitively known to anyone, and there is no documentation provided so far from the authorities regarding the same. This work focuses on the investigation & consequence analysis of the explosion using TNT equivalent approach. The overpressure and the impulse obtained from TNT calculations are used in probit models to assess the damages caused on human beings and structures. The results obtained in this investigative approach are then utilized to provide an analytical inference relative to the damage proxy map reported by the advance rapid imaging analysis team from NASA. Also, this work examines the existing standards, fire safety measures and legal regulations for ammonium nitrate facilities in the region. AN explosion during storage like other fire and explosion accidents are definitely preventable owing to the technological advancements and developments to prevent or extinguish controllable fires. The significance of this work relates to the methods for calculation of consequences of explosion that are happening due to the storage of highly hazardous explosive materials in excessive quantities and insists the necessity of incorporating adequate safety measures while storing such reactive and hazardous materials.     

Risk assessment method of polyethylene dust explosion based on explosion parameters

The explosion characteristic parameters of polyethylene dust were systematically investigated. The variations in the maximum explosion pressure (P_max), explosion index (K_st), minimum ignition energy (MIE), minimum ignition temperature (MIT), and minimum explosion concentration (MEC) of dust samples with different particle sizes were obtained. Using experimental data, a two-dimensional matrix analysis method was applied to classify the dust explosion severity based on P_max and K_st. Then, a three-dimensional matrix was used to categorize the dust explosion sensitivity based on three factors: MIE, MIT, and MEC. Finally, a two-dimensional matrix model of dust explosion risk assessment was established considering the severity and sensitivity. The model was used to evaluate the explosion risk of polyethylene dust samples with different particle sizes. It was found that the risk level of dust explosion increased with decreasing particle size, which was consistent with the actual results. The risk assessment method can provide a scientific basis for dust explosion prevention in the production of polyethylene.     

Modeling thermal analysis for predicting thermal hazards relevant to transportation safety and runaway reaction for 2,2′-azobis(isobutyronitrile)

The pure decomposition behavior of 2,2′-azobis (isobutyronitrile) (AIBN) and its physical phase transformation were examined and discussed. The thermal decomposition of this self-reactive azo compound was explored using differential scanning calorimetry (DSC) to elucidate the stages in the progress of this chemical reaction. DSC was used to predict the kinetic and process safety parameters, such as self-accelerating decomposition temperature (SADT), time to maximum reaction rate under adiabatic conditions (TMR_ad), and apparent activation energy (E_a), under isothermal and adiabatic conditions with thermal analysis models. Moreover, vent sizing package 2 (VSP2) was applied to examine the runaway reaction combined with simulation and experiments for thermal hazard assessment of AIBN. A thorough understanding of this reaction process can identify AIBN as a hazardous and vulnerable chemical during upset situations. The sublimation and melting of AIBN near its apparent onset decomposition temperature contributed to the initial steps of the reaction and explained the exothermic attributes of the peaks observed in the calorimetric investigation.     

Study of lignocellulosic biomass ignition properties estimation from thermogravimetric analysis

In the last decade, the use of renewable resources has increased significantly in order to reduce the energetic dependence on fossil fuels, as they have an important contribution to the global warning and greenhouse gasses effect. Because of that, research on biofuels has been increased in the last years as its characteristics of use match those of the conventional fuel's: solid biomass can be used instead of coals, and biodiesel could replace diesel. Research on solid biomass ignition properties has been considerably developed because of the amount of industrial accidents related to the treatment and use of solid biomass (self-ignition, dust explosions, etc.). On the other hand, thermogravimetric analysis (TGA) is becoming and important characterization technique as it can be used to determine a wide spectrum of properties, such as kinetics, composition, proximate analysis, etc. This research aims to combine thermal analysis and ignition properties, by using the TGA to obtain the elemental composition of lignocellulosic biomass and compare those results to Minimum Ignition Energy (MIE) values test output, so a relation between composition and MIE can be found.To achieve this aim, biomass samples from different origins have been used: oil palm wastes (empty fruit bunches, mesocarp fiber and palm kernel shell), agricultural wastes (straw chops) and forestry wastes (wood chips and wood powder). Also, raw materials and torrefied biomass were compared. The hemicellulose/cellulose ratio was calculated and compared to different flammability properties, finding out that the greater the ratio and the lower the onset temperature (temperature at which the pyrolysis reaction accelerates), the lower was the minimum ignition energy. From this basis it was possible to define “tendency areas” that grouped the samples whose MIE values were similar. Three tendency areas were found: high minimum ignition energy, medium minimum ignition energy, and low ignition energy.     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.     

Thermal hazard and decomposition kinetics of 1-butyl-2,3-dimethylimidazolium nitrate via TGA/DSC and FTIR

1-Butyl-2,3-dimethylimidazolium nitrate ([Bmmim][NO₃]), a kind of versatile and novel ionic liquids, is widely applied in the modern petrochemical industry. Nevertheless, its thermal hazard safety data at high temperature or thermal disturbance conditions are currently unavailable. Therefore, this study aimed to characterize the thermal risk of [Bmmim][NO₃] through auto-ignition temperature measurements, flash point analysis, thermal gravimetric analysis/differential scanning calorimetry (TGA/DSC), TGA-Fourier transform infrared spectroscopy (TGA-FTIR) and thermal decomposition kinetics analysis. Additionally, [Bmmim][NO₃] was examined using isothermal thermogravimetric analysis at different temperatures (220, 230, 240, 250, 260 and 270 °C). The experimental results show that the flash point of [Bmmim][NO₃] is 305.70 ± 9.30 °C and the auto-ignition temperature is 341.00 ± 21.60 °C with an ignition delay time of 8.6 s. In addition, using the nitrogen atmosphere TGA data to calculate the activation energy according to the Friedman, Kissinger and Flynn-Wall-Ozawa methods, roughly the same results were obtained. Finally, TGA-FTIR results show that [Bmmim][NO₃] produced acetylene, butane, butanol and carbon dioxide during the thermal decomposition process. This study could provide data support and some guidance for the thermal hazard assessment and safety control of [Bmmim][NO₃] during its use and storage.     

Seismic fragility analysis of a coupled tank-piping system based on artificial ground motions and surrogate modeling

The catastrophic consequences of recent NaTech events triggered by earthquakes highlighted the inadequacy of standard approaches to seismic risk assessment of chemical process plants. To date, the risk assessment of such facilities mainly relies on historical data and focuses on uncoupled process components. As a consequence, the dynamic interaction between process equipment is neglected. In response to this gap, researchers started a progressive integration of the Pacific Earthquake Engineering Research Center (PEER) Performance-Based Earthquake Engineering (PBEE) risk assessment framework. However, a few limitations still prevent a systematic implementation of this framework to chemical process plants. The most significant are: (i) the computational cost of system-level simulations accounting for coupling between process equipment; (ii) the experimental cost for component-level model validation; (iii) a reduced number of hazard-consistent site-specific ground motion records for time history analyses.In response to these challenges, this paper proposes a recently developed uncertainty quantification-based framework to perform seismic fragility assessments of chemical process plants. The framework employs three key elements: (i) a stochastic ground-motion model to supplement scarcity of real records; (ii) surrogate modeling to reduce the computational cost of system-level simulations; (iii) a component-level model validation based on cost-effective hybrid simulation tests. In order to demonstrate the potential of the framework, two fragility functions are computed for a pipe elbow of a coupled tank-piping system.