企业计算机网络的安全管理

从技术手段和制度规范上，综合提出了企业计算机网络的安全管理策略。     

Identification of Driver Model Parameters

The paper presents a driver model, which can be used in a computer simulation of a curved ride of a car. The identification of the driver parameters consisted in a comparison of the results of computer calculations obtained for the driver-vehicle-environment model with different driver data sets with test results of the double lane-change manoeuvre (Standard No. ISO/TR 3888:1975, International Organization for Standardization [ISO], 1975) and the wind gust manoeuvre. The optimisation method allows to choose for each real driver a set of driver model parameters for which the differences between test and calculation results are smallest. The presented driver model can be used in investigating the driver-vehicle control system, which allows to adapt the car construction to the psychophysical characteristics of a driver.     

Physical Symptoms in Young Adults and Their Use of Different Computers and Mobile Phones

This paper presents the use of new technical equipment by young adults (30 years old or younger), and the physical symptoms they have. The paper then analyses how the symptoms are associated with the use of computers and mobile phones, taking into account the background information. The study is based on a survey of 15000 working-age ( 18-65) Finns. The responses (1563) covering young adults’ physical symptoms were analysed. Altogether 53.3% of all young adults had pretty often or more frequently pain, numbness or aches in the neck and 32.2% had aches in the hip and lower back. Women experienced more pain, numbness or aches in the neck (65.0%) than men (34.5%). The use of different computers at leisure quite often had an association with some symptoms in different parts of the body. In addition, exhaustion at work had associations with some physical symptoms. In the future, it is essential to note ergonomic reasons and exhaustion at work when young adults experience pain, numbness or aches.     

Analysis of Conditions and Organization of Work of Notebook Computer Users

Abstract

Aim. The aim of this study was to evaluate working conditions with a notebook computer (notebook) as a potential cause of musculoskeletal disorders. Material and methods. The study had 2 stages. The first one was a questionnaire survey among 300 notebook users. The next stage was an expert analysis of 53 randomly selected workstations. The questionnaire survey included questions about the participants, their working conditions, work organization and also duration of work with a notebook. Results and conclusions. The results of the research showed that most examined operators used a notebook as a basic working tool. The most important irregularities included an unadjustable working surface, unadjustable height of the seat pan and backrest, unadjustable height and distance between the armrests and no additional ergonomic devices (external keyboard, docking station, notebook stand or footstool).     

大学生受电脑电磁辐射的研究

为了研究大学生受电脑电磁辐射的实际状况,采用EMR300电磁辐射分析仪,对电脑电磁辐射在100kHz～3GHz的电场强度值(V/m),进行了实验室研究性监测和宿舍、机房内的现场监测.监测的结果表明:宿舍中心处电磁辐射环境强度(100kHz～3GHz频率范围内的综合电场强度)低于0.5V/m;距离显示器屏幕前方0.4m以上操作电脑,则眼睛处辐射强度在安全值内.而目前,机房内台式电脑按行紧密摆放,前排电脑操作者后脑正对后一排电脑显示器突出的后部处,在后脑处辐射强度可超过10V/m;此外,学生宿舍空间拥挤,鼠标、键盘通常与显示器近距离摆放在一起,造成显示器辐射与键盘、鼠标自身辐射叠加,导致在键盘和鼠标处手掌受到的辐射强度大,不容忽视.     

低温碱溶脱除液晶显示器(LCD)玻璃基板粉末中的硅和铝

为了提高氯化法回收LCD中铟的效果,降低SiO2和Al2O3对氯化过程的干扰,采用NaOH对液晶显示器玻璃基板粉末中的硅和铝进行了预先溶出规律研究.首先分析了LCD粉末中SiO2和Al2O3的含量、形貌以及铟的浸出变化,然后计算了SiO2和Al2O3的脱除效率.在条件实验基础上通过正交实验设计得出优化实验条件.研究表明,在液固比为90:2、温度95℃、溶出时间2 h、碱度0.56 g/L的最佳工艺条件下, SiO2的脱除率为80.88%、Al2O3的脱除率为 83.30%、二者总的脱除率为81.30%,洗涤液中没有发现铟的溶出,碱溶后的物料表面产生大量均匀的孔状结构.这将对液晶显示器玻璃基板粉末的资源化与铟的富集有重要意义.     

空心玻璃微珠三相泡沫抗溶抗烧性能实验研究

研究了空心玻璃微珠添加量、泡沫液浓度和泡沫液性质对三相泡沫在油面的稳定性和抗烧性能影响规律.结果表明,空心玻璃微珠添加量越大,三相泡沫在油面的稳定性越差.泡沫液浓度和性质对三相泡沫在油面的稳定性有一定影响.添加微珠后三相泡沫的抗烧性能降低,与蛋白两相泡沫相比,空心微珠添加量为10mL、30mL和50mL时,ti缩短约26%、38%和42%,泡沫完全烧损时间也缩短约20%、28%和31%.     

计算机模拟警戒作业疲劳与绩效测量实验设计

为探索警戒作业工间休息机制,设计计算机模拟监控警戒作业实验研究疲劳与绩效之间的关系.通过对9个时间单元绩效数据的两两比较,发现原有实验方案存在不合理性.分析心理厌倦和暂时性注意缺失对作业绩效的干扰,找出问题根源.通过调整任务界面和参数、增加声音警示音、设置时间进度条、加强实验前自我检查和培训环节对实验方案进行改进,并检...     

计算机废弃物的处理与利用

介绍计算机废弃物的来源、组成、污染,重点阐述了计算机废弃物的拆卸技术和塑料、线路板、贵金属的回收利用方法。对计算机废弃物处理有重要的参考借鉴价值。     

地下水人工补给过程介质堵塞及控制研究进展

人工补给作为解决地下水超采及其环境负效应的有效措施,在全球得到广泛应用.但人工补给过程中的介质堵塞问题对补给效率、运行成本及工程寿命有着显著不利影响.在收集整理已有研究资料的基础上,对人工补给类型,过程中介质堵塞机理、预测、控制和治理方法进行了详细归纳和总结.分析表明,介质堵塞受到介质、水源物化特征和水文地球化学条件等因素影响;堵塞预测方法有水质指标法、经验公式法、数学模型法;堵塞的预防目前以水质控制为主;堵塞的治理需综合物理和化学方法.尽管有关人工补给的多种技术已日益成熟,但结合介质空间差异特征和水源条件复杂性开展的人工补给促渗技术还需进一步研究.