基于BP神经网络的煤层自燃预测

在全面分析影响煤层自燃因素的基础上,建立了煤层自燃预测的人工神经网络模型.应用该模型对某煤田的多个煤层样本进行了训练和预测,网络经过10次训练后,误差达到设定的最小值,6次预测测试中最大误差仅为0.027 8,最小的为0.000 1.研究表明,该模型精度较高,可用于预测煤层自燃的实际应用.     

含信号控制人行横道的街道峡谷污染物扩散三维数值模拟

耦合微观交通仿真和机动车尾气排放模型,分别对含信号控制人行横道和不含信号控制人行横道的街道峡谷污染物排放进行计算,并以此为排放源,采用k-ε两方程模型与组分输运方程对风向与街道垂直时的污染扩散情况进行了三维数值模拟.结果表明,k-ε两方程模型与组分输运方程可以较好地模拟风向与街道垂直时三维街道峡谷内的污染物扩散情况.峡...     

基于非线性响应函数和蒙特卡洛模拟的滇池流域污染负荷削减情景分析

为定量了解滇池外海水质对流域污染负荷削减率的响应变化程度,并评估相关决策的潜在风险,在长期的水质模拟结果基础之上,本文使用内嵌非线性响应函数的蒙特卡罗模拟方法,在2个不确定性水平下（5%和10%的变异范围）分析滇池外海为达到3个水质目标情景（Ⅲ类、Ⅳ类和Ⅴ类）的污染负荷削减及其不确定性.模型结果表明,在2种不确定性水平...     

赤水河流域生物多样性保护现状和对策

基于对赤水河流域生物多样性的综合调研,分析了赤水河流域生物多样性的主要特征、流域生物多样性保护的现状、面临的机遇和潜在的压力,探讨了赤水河流域生物多样性保护的基本对策。提出赤水河流域生物多样性保护应在国家政策框架内,在流域综合管理理念指导下兼顾重点区域保护和生态廊道建设,探索流域尺度上生物多样性保护与流域社会经济协调有序发展的新型管理模式。     

Relict communities and populations of petrophilous plant species in northern regions of Sverdlovsk oblast and problems in their conservation

An inventory of rock vegetation has been taken in river valleys on the eastern slope of the southern part of the Northern Urals and the northern part of the Middle Urals. New habitats of some rare plant species, relict communities of forest-steppe species at the northern limit of their distribution, and ultrasmall populations of petrophilous species growing in isolation for a long time have been revealed. In studies on a group of similar specially protected areas (e.g., within river valleys), it is proposed to identify key sites distinguished by the highest species richness of vegetation     

空调系统冷冻水循环水泵变频运行的变温差控制

在分析空调系统变流量运行调节的基础上,提出了变温差控制并给出了控制方案。变温差控制过程不仅具有负反馈,而且具有正反馈,能较好的适应空调负荷的变化。比较分析了变温差控制、定温差控制、定压差控制的节能性,变温差控制的节能潜力最大,是一种最佳控制方式。     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

农村沼气在北方农业源减排中的应用浅析

农村沼气作为一种特殊的清洁能源,在沈阳市农村节能减排、应对气候变化和发展低碳经济、促进新农村建设方面发挥了巨大的作用。本文通过对沼气工程在北方地区应用的阐述,力图推动北方农村沼气在农业源减排工作中的应用。     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

基于CALPUFF模型的漳州市大气环境容量研究

研究表明：CALPUFF模式是运用于广域的大气扩散模型,在区域范围较大的复杂地形条件下的应用具有突出的优势.利用CALPUFF大气扩散模型模拟漳州市2009年气象场和污染物浓度场,采用监测值对模拟结果进行验证表明模型的适用性;基于现状污染源,建立大气污染物传递系数矩阵,结合线性优化法测算了不同环境空气质量标准下漳州市大气环境容量.