短期保护性耕作措施对大豆-冬小麦轮作系统温室气体排放的影响

通过田间试验,在大豆和冬小麦生长季,进行常规翻耕(conventional tillage,T)、免耕(no-tillage with no straw cover,NT)、常规翻耕+秸秆(conventional tillage with straw cover,TS)、免耕+秸秆(no-till with straw cover,NTS)4种耕作措施处理,采用静态箱-气相色谱法测定土壤-作物系统CO_2和N_2O排放通量.结果表明:在大豆生长季,与T相比,NTS在开花-结荚期显著增加了CO_2累积排放量(P=0.045),增幅达27.9%;NT在鼓粒-成熟期显著降低了CO_2累积排放量(P=0.043),降幅达28.9%.与T相比,NT在鼓粒-成熟期的N_2O累积排放量降低了28.3%(P=0.042).在冬小麦生长季,与T相比,TS、NT在拔节-孕穗期使CO_2累积排放量降低了24.3%(P=0.032)和36.0%(P=0.041),在成熟期降低了26.8%(P=0.027)和33.1%(P=0.038).在返青期,NT、NTS、TS的N_2O累积排放量与T比较均没有明显差异,NTS比NT的N_2O累积排放量降低了42.0%(P=0.035).可见,保护性耕作措施对土壤-作物系统CO2排放的影响较大,对N2O排放的影响不明显.     

中国铝生命周期能耗与碳排放的情景分析及减排对策

铝工业是高能耗高排放工业,探索铝工业的节能减排路径有助于我国实现《巴黎协定》中的温室气体减排承诺.采用物质流分析和生命周期评价方法,基于存量水平、技术水平和能源结构设置了15种情景,研究了我国铝工业1990～2100年的能耗和碳排放量,探索不同路径下的节能减排潜力.我国铝在用存量将在2040～2050年达到峰值(4.6...     

中国南中国海海岸湿地退化现状和保护对策

南中国海湿地包括广东省、香港特别行政区、澳门特别行政区、广西壮族自治区和海南省等五个行政区,总面积为15 393.75 km2。由于受人口增加和经济发展的巨大压力,中国南中国海湿地破坏严重,退化趋势明显。本文在对中国南中国海地区海岸湿地的现状、类型及湿地退化的主要原因进行分析的基础上,提出中国南中国海地区海岸湿地资源保护与管理的建议,以便切实保护中国南中国海沿海多样化的湿地类型,持续发挥其生态服务功能。     

基于等级全息建模的输油泵机组风险根源辨识*

为“挖掘”输油泵机组风险根源,降低设备预知性维护难度,结合输油泵多准则风险评价,提出1种基于等级全息建模的输油泵机组风险根源辨识方法,运用等级全息建模方法将输油泵系统分解为泵体结构、管理因素、环境因素、操作因素、技术因素、运行因素、设备安装7个子系统进行定性和定量分析。结果表明:相比危险与可操作性分析（HAZOP）、事故树分析（FTA）等传统风险辨识方法,等级全息建模（HHM）对轴承等关键部件以及压力等运行参数的监测更为深入,能够有效辨识输油泵机组高风险情景,提升输油泵的风险辨识效率。     

Spatiotemporal Variability of Modeled Watershed Scale Surface‐Depression Storage and Runoff for the Conterminous United States

This study explores the viability of using simulated monthly runoff as a proxy for landscape‐scale surface‐depression storage processes simulated by the United States Geological Survey’s National Hydrologic Model (NHM) infrastructure across the conterminous United States (CONUS). Two different temporal resolution model codes (daily and monthly) were run in the NHM with the same spatial discretization. Simulated values of daily surface‐depression storage (treated as a decimal fraction of maximum volume) as computed by the daily Precipitation‐Runoff Modeling System (NHM‐PRMS) and normalized runoff (0 to 1) as computed by the Monthly Water Balance Model (NHM‐MWBM) were aggregated to monthly and annual values for each hydrologic response unit (HRU) in the CONUS geospatial fabric (HRU; n = 109,951) and analyzed using Spearman’s rank correlation test. Correlations between simulated runoff and surface‐depression storage aggregated to monthly and annual values were compared to identify where which time scale had relatively higher correlation values across the CONUS. Results show Spearman’s rank values >0.75 (highly correlated) for the monthly time scale in 28,279 HRUs (53.35%) compared to the annual time scale in 41,655 HRUs (78.58%). The geographic distribution of HRUs with highly correlated monthly values show areas where surface‐depression storage features are known to be common (e.g., Prairie Pothole Region, Florida).     

Comparison and Evaluation of Gridded Precipitation Datasets in a Kansas Agricultural Watershed Using SWAT

Gridded precipitation datasets are becoming a convenient substitute for gauge measurements in hydrological modeling; however, these data have not been fully evaluated across a range of conditions. We compared four gridded datasets (Daily Surface Weather and Climatological Summaries [DAYMET], North American Land Data Assimilation System [NLDAS], Global Land Data Assimilation System [GLDAS], and Parameter‐elevation Regressions on Independent Slopes Model [PRISM]) as precipitation data sources and evaluated how they affected hydrologic model performance when compared with a gauged dataset, Global Historical Climatology Network‐Daily (GHCN‐D). Analyses were performed for the Delaware Watershed at Perry Lake in eastern Kansas. Precipitation indices for DAYMET and PRISM precipitation closely matched GHCN‐D, whereas NLDAS and GLDAS showed weaker correlations. We also used these precipitation data as input to the Soil and Water Assessment Tool (SWAT) model that confirmed similar trends in streamflow simulation. For stations with complete data, GHCN‐D based SWAT‐simulated streamflow variability better than gridded precipitation data. During low flow periods we found PRISM performed better, whereas both DAYMET and NLDAS performed better in high flow years. Our results demonstrate that combining gridded precipitation sources with gauge‐based measurements can improve hydrologic model performance, especially for extreme events.     

Estimating Potential Climate Change Effects on the Upper Neuse Watershed Water Balance Using the SWAT Model

Climate change poses water resource challenges for many already water stressed watersheds throughout the world. One such watershed is the Upper Neuse Watershed in North Carolina, which serves as a water source for the large and growing Research Triangle Park region. The aim of this study was to quantify possible changes in the watershed’s water balance due to climate change. To do this, we used the Soil and Water Assessment Tool (SWAT) model forced with different climate scenarios for baseline, mid‐century, and end‐century time periods using five different downscaled General Circulation Models. Before running these scenarios, the SWAT model was calibrated and validated using daily streamflow records within the watershed. The study results suggest that, even under a mitigation scenario, precipitation will increase by 7.7% from the baseline to mid‐century time period and by 9.8% between the baseline and end‐century time period. Over the same periods, evapotranspiration (ET) would decrease by 5.5 and 7.6%, water yield would increase by 25.1% and 33.2%, and soil water would increase by 1.4% and 1.9%. Perhaps most importantly, the model results show, under a high emission scenario, large seasonal differences with ET estimated to decrease by up to 42% and water yield to increase by up to 157% in late summer and fall. Planning for the wetter predicted future and corresponding seasonal changes will be critical for mitigating the impacts of climate change on water resources.     

An application of a modified theory of planned behavior model to investigate adolescents’ job safety knowledge,norms, attitude and intention to enact workplace safety and health skills

Introduction: For many reasons, including a lack of adequate safety training and education, U.S. adolescents experience a higher rate of job-related injury compared to adult workers. Widely used social-psychological theories in public health research and practice, such as the theory of planned behavior, may provide guidance for developing and evaluating school-based interventions to prepare adolescents for workplace hazards and risks. Method: Using a structural equation modeling approach, the current study explores whether a modified theory of planned behavior model provides insight on 1,748 eighth graders’ occupational safety and health (OSH) attitude, subjective norm, self-efficacy and behavioral intention, before and after receiving instruction on a free, national young worker safety and health curriculum. Reliability estimates for the measures were produced and direct and indirect associations between knowledge and other model constructs assessed. Results: Overall, the findings align with the theory of planned behavior. The structural equation model adequately fit the data; most path coefficients are statistically significant and knowledge has indirect effects on behavioral intention. Confirmatory factor analyses suggest that the knowledge, attitude, self-efficacy, and behavioral intention measures each reflect a unique dimension (reliability estimates ≥0.86), while the subjective norm measure did not perform adequately. Conclusion: The findings presented provide support for using behavioral theory (specifically a modified theory of planned behavior) to investigate adolescents’ knowledge, perceptions, and behavioral intention to engage in safe and healthful activities at work, an understanding of which may contribute to reducing the downstream burden of injury on this vulnerable population—the future workforce. Practical application: Health behavior theories, commonly used in the social and behavioral sciences, have utility and provide guidance for developing and evaluating OSH interventions, including those aimed at preventing injuries and promoting the health and safety of adolescent workers in the U.S., who are injured at higher rates than are adults.     

System safety assessment using safety entropy

Safety assessment has a primary role in hazardous operations. Most studies on safety assessment focus on risk and accident modeling, in which safety is absent. These top-down methods are highly dependent on the occurred accidents to establish accidental scenarios, which may make the assessment approach lagging behind the evolving modern systems. Moreover, this “special to general” logic is scientifically suspect in safety assessment. There is a call for the development of safety assessment methods in the presence of system safety to complement risk-focused safety analysis. These methods should provide a framework based on a bottom-up approach to examine system safety from the operational perspective. This paper has attempted to provide a potential solution. In particular, a novel concept of safety entropy is proposed to integrate with The Functional Resonance Analysis Method (FRAM), which is used to form the qualitative understanding of a system. A formula consisted of safety entropy, functional conformability, and system complexity has been established to determine the spontaneity of the safety state-changing process. The proposed method is applied to the safety assessment of a propane feed-control system. The results show the applicability of the method. Nevertheless, the model still needs to be further improved to fulfill better support for safety-related decision problems.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.