城市污水处理厂出水低浓度污染物的生物降解研究

由于城市污水处理厂出水中含有的低浓度污染物的性能稳定而不易被去除,为探索一种快速、直接的低浓度污染物的深度处理方法,通过采用富二价阳离子斜发沸石作载体的生物沸石曝气滤池对某城市污水厂二级处理出水中的低浓度污染物的去除进行了实验研究,研究结果表明,当污水厂二级处理出水水质年平均指标NH3-N、COD、BOD5、TP及浊度分别为27.4 mg/L、57.2 mg/L、20.4 mg/L、1.7 mg/L和16 NTU时,采用两级生物沸石曝气滤池串联工艺,在第一级生物沸石曝气滤池装填3 m生物沸石,水力停留时间1 h,气水比为2∶1;第二级生物沸石曝气滤池装填2 m生物沸石,水力停留时间为0.5 h,气水比为1∶1,最终出水年平均指标NH3-N 0.13 mg/L、COD 7.55 mg/L(CODMn)、BOD50.78 mg/L、TP0.6 mg/L、浊度为0.13 NTU,出水水质可满足热力发电厂循环冷却补充水的水质要求.此种方法为污水处理厂的出水提供了经济有效的回用途径。     

基于Voronoi图的居民点空间分布特征研究——以甘肃省为例

采用GIS查询统计与Voronoi图CV值相结合的分析方法,通过计算点状目标的Voronoi多边形面积的变异系数(CV值)方法来分析点状目标的空间分布特征。分析结果表明,甘肃省有9个市、县为随机分布,其余市、县为集群分布,但总体上为集群分布。最近邻指数和CV值通过级差变换后,发现其存在相关性,相关系数为负值,表明两者之间存在负相关关系。     

排烟冷却塔烟气抬升高度的计算分析

华北地区某电厂排烟冷却塔烟气抬升高度的光学照相法实测结果显示,选用S／P模式计算出排烟冷却塔烟气括升高度是合理的。在环境风速小、空气潮湿条件下,采用排烟冷却塔排放方式有利于污染物稀释扩散;在环境风速大、空气干燥、逆温等不利气象条件时,采用排烟冷却塔排放方式,烟气抬升高度较低。     

燃机进气冷却技术探讨

燃机进气冷却技术是一种提高燃机发电机组在高温环境下出力的关键技术,研究、实践燃机进气冷却技术具有重要意义.探讨了大气温度影响燃机出力、效率的机理,介绍了燃机进气冷却应用的发展过程,并分析对比了燃机进气冷却的主要方式及主要优缺点,可对燃机进气冷却技术的工程应用提供参考.     

高压静电场对火电厂循环冷却水阻垢效果及机理

利用双通道工业循环冷却水分析测试台和高压静电水处理器,对火电厂的冷却水进行阻垢效果和机理研究。结果表明,施加工作电压2．0～4．0kV时,平均阻垢率随电压的升高而增大,达到61．7％,以后随着电压的升高平均阻垢率呈下降趋势,在7．5kV电压作用下平均阻垢率43．4％。对垢样晶体的SEM扫描图片表明,经高压静电场处理前的水垢晶体以方解石型硬垢为主,处理后发生了晶型转化,转化为文石型软垢,有利于垢的去除。     

罐底含油污泥萃取溶剂的选择与优化

针对某炼化企业在石油储运过程中产生的罐底油泥,进行了油泥样分析和不同萃取剂萃取回收油分实验.经分析该罐底油泥含水率约16.1％,总有机物含量约34.8％,其中可萃取石油类物质约占总有机物成分的67.0％.考察不同溶剂的萃取效果,结果表明,石脑油90 ～ 110℃沸程段的馏分油的萃取效果和工艺可操作性优越于其他常用溶剂,其萃取效果排序为石脑油90～ 110℃沸程段的馏分油＞120#溶剂油＞正庚烷＞石油醚(90 ～ 120℃)＞石油醚(60 ～ 90℃);用石脑油90 ～ 110℃沸程段的馏分油在优化萃取工艺条件下,经两次萃取可分离出大于96％的可萃取油分,罐底油泥中有机物的萃出率可达64％以上,比120#溶剂油萃取效果高出约3％～5％,实现了罐底油泥更深程度的萃取和资源化利用.     

Testing and performance analysis of a hollow fiber-based core for evaporative cooling and liquid desiccant dehumidification

In this study, an innovative heat and mass transfer core is proposed to provide thermal comfort and humidity control using a hollow fiber contactor with multiple bundles of micro-porous hollow fibers. The hollow fiber-based core utilizes 12 bundles aligned vertically, each with 1,000 packed polypropylene hollow fibers. The proposed core was developed and tested under various operating and ambient conditions as a cooling core for a compact evaporative cooling unit and a dehumidification core for a liquid desiccant dehumidification unit. As a cooling core, the fiber-based evaporative cooler provides a maximum cooling capacity of 502 W with a wet bulb effectiveness of 85%. As a dehumidification core and employing potassium formate as a liquid desiccant, the dehumidifier is capable of reducing the air relative humidity by 17% with an overall dehumidification capacity of 733 W and humidity effectiveness of 47%. Being cheap and simple to design with their attractive heat and mass transfer characteristics and the corresponding large surface area-to-volume ratio, hollow fiber membrane contactors provide a promising alternative for cooling and dehumidification applications.     

Cooling of multichip light emitting diode with ultra-high power—An application of bypass cooling from an air-conditioning system

This study focuses on the use of indium gallium nitride multichip for ultra-high power light emitting diode (LED) heat transfer and thermal cooling analysis. This research approach is based on the multichip LED experimental study of aluminum extrusion heat sink and air-conditioning system-forced cooling approach. An investigation of heat transfer characteristics of the phenomenon of variation is conducted to improve performance and develop an LED system that can become a reference guideline for thermal design and assembly. This study’s package structure can use silicon substrate material and fill copper material to increase thermal conduction. An air-conditioning system bypass cooling approach is also used. This study aims to help to increase LED thermal cooling, long life, reliability, and reduce the optic lumen decay phenomenon in the future. Results are based on different power ratings that can be used to redefine LED classifications.     

影响滤简分析质量的主要因素和改进方法

介绍了影响滤简称量恒重的原因,指出空气湿度、冷却时间和烘干时间等对滤简称量恒重都有影响。提出使用标准空白滤筒、在平衡室中冷却、称量滤筒、并采用专用滤简盒和刚玉滤筒采样减小系统误差。     

季节性温差变化对非控温PN-Anammox工艺稳定脱氮的影响

采用具有自回流的分区式部分亚硝化(PN)和厌氧氨氧化(Anammox)耦合工艺,利用季节性温度的变化,研究了逐步降温对耦合工艺整体脱氮效能及各区域氮素转化能力的影响.结果表明,当温度由35℃降低到25℃时,因厌氧区Anammox的氮去除速率由18 kg·m~(-3)·d~(-1)下降到9 kg·m~(-3)·d~(-1),导致耦合工艺的整体氮去除速率大幅度下降,由1 kg·m~(-3)·d~(-1)下降到0.5 kg·m~(-3)·d~(-1).当温度降低到20℃时,联合工艺的脱氮速率下降趋势趋于缓慢,但好氧区的NO~-_2-N生成速率开始明显下降,由0.9 kg·m~(-3)·d~(-1)下降到0.2 kg·m~(-3)·d~(-1).同时,亚硝化菌(AOB)的优势生长被打破,硝化菌(NOB)开始大量增长,出水NO~-_3-N浓度迅速增大.运用Arrhenius公式对联合工艺总氮去除速率及各个区域氮转化速率与温度的关系进行非线性拟合,发现厌氧区Anammox的氮去除速率的温度特征系数比好氧区NO~-_2生成速率的温度特征系数大,表明温度对PN-Anammox工艺的Anammox的效能影响更大.