烟塔排烟电厂大气影响预测分析

在系统分析我国烟塔排烟电厂大气影响评价及其相关研究成果的基础上,指出应关注的几个问题,并结合烟塔排烟电厂的负荷变化特点提出了解决问题的基本思路及需要重点研究的专题。     

Experimental investigation on the phase change material-based modular heat exchanger for thermal management of a building

A phase change material (PCM)-based flat plate modular heat exchanger for free cooling application, suitable for the diurnal temperature variation that prevails during the summer months of Bangalore city, India is designed and experimentally investigated. The flow and other parameters selected in the present study are meant to suit the accelerated charging of the PCM in the modular heat exchanger during the early morning hours, and to provide cool energy to the room during the daytime, by circulating the ambient air through the heat exchanger at a lower velocity. It is observed from the charging experiments that the decrease in the inlet air temperature has more influence in reducing the solidification time than the increase in the inlet air velocity. The heat exchanger designed in the present investigation is capable of maintaining the room temperature around 30°C for a longer duration of 8 hr when the heat load is 0.5 kW. It is suggested to design the modular heat exchanger with a surface area proportionate to the present heat exchanger size when the room heat load increases beyond 0.5 kW, in order to maintain a minimum comfortable temperature of 30°C in the room.     

A novel objective function for optimal DG allocation in distribution systems using meta-heuristic algorithms

Meta heuristic algorithms have been introduced as a powerful method to solve the nonlinear optimization problems. These algorithms have been employed in many complex engineering problems due to their high capability in finding the solutions and reaching the optimal results within a short period of time. Optimization of distributed generation units in distribution systems, which have profoundly impacted on the system losses and voltage profile, is one of these nonlinear problems. In this study, a novel objective function was proposed for optimization procedure by meta-heuristic algorithms. The related objective function consists of the total cost of distributed generation units, cost of the purchased natural gas, cost of distribution system power losses, and penalty for greenhouse gas emissions. The electrical, cooling, and heating loads were considered in this study. In the distribution system, the waste and fuel cell were used to supply the required heating and cooling loads. The meta-heuristic algorithms including Particle Swarm Optimization (PSO), Genetic Algorithm (GA), and Imperialist Competitive Algorithm (ICA) were employed to find the optimal location and size of distributed generation units in a distribution system. A detailed performance analysis was done on 13 bus radial distribution system. The performances of three algorithms were compared with each other and results showed that the PSO was the fastest; and had the best solution and optimum results. Furthermore, the PSO reached the optimum solution in a fewer number of iterations than the GA and ICA algorithms.     

Contribution of additives Cu to its accumulation in pig feces： study in Beijing and Fuxin of China

Massive amounts of pig manure are produced by intensive pig farm in China, and the composition of pig manure has changed much due to the use of feed additives. However, little is known about the exact Cu （copper） feed as additives or present as contaminants in pig feed and the residues in feces. One hundred and thirty-seven feeds and one hundred and forty-two fecal samples from 48 pig farms were collected in Beijing and Fuxin cities in 1999 and 2005, respectively. The concentrations of Cu were in the range of 6.86-395.19 mg/kg in the feed samples, and the mean values were in the order of weaner〉 grower-finisher〉 sow＇s feeds. The high concentrations over EU recommendations implied that excessive levels of Cu are fed on many pig farms in Beijing and Fuxin. Cu was also present in high concentrations in feces, and concentrations were highly variable. Cu concentrations in the feces from grower-finisher and weaner pigs were significantly greater than feces of sows. The super-intensive and small-scale farms had higher levels of Cu in feces than the middle farms. Cu concentrations in pig feces were approximately 5-times greater than in pig feeds. Feed management in grower-finisher pigs on super-intensive and small-scale pig farms is needed to reduce high Cu concentrations in feces and risks to soil contamination while feces are land-applied.     

Application of multiwalled carbon nanotubes treated by potassium permanganate for determination of trace cadmium prior to flame atomic absorption spectrometry

In this study we investigated the enrichment ability of oxidized multiwalled carbon nanotubes (MWCNTs) and established a new method for the determination of trace cadmium in environment with flame atomic absorption spectrometry.The MWCNTs were oxidized by potassium permanganate under appropriate conditions before use as preconcentration packing.Parameters influencing the recoveries of target analytes were optimized.Under optimal conditions,the target analyte exhibited a good linearity (R~2=0.9992) over the concentration range 0.5-50 ng/ml.The detection limit and precision of the proposed method were 0.15 ng/ml and 2.06%, respectively.The proposed method was applied to the determination of cadmium in real-world environmental samples and the recoveries were in the range of 91.3%-108.0%.All these experimental results indicated that this new procedure could be applied to the determination of trace cadmium in environmental waters.     

基于模糊规则的社会力模型改进研究

针对社会力模型人员作用范围系数进行优化,基于模糊规则改进模型中人员作用范围,使其成为受到疏散速度、疏散人员间距共同影响的动态参数,使模型中人员可通过自身模糊经验判断实际速度、人员交互距离状态来确定心理期望作用范围。仿真结果符合真实疏散特性,证明了人员作用范围系数受人员运动状态的动态影响,并提供参考模糊规则制定原则。     

车用发动机热平衡研究进展与展望

以发动机热量分配、热负荷及冷却系统智能控制为切入点,综述了车用发动机热平衡研究的现状,并探讨了进一步的发展方向。指出针对我国特殊的高原环境,进行极端工作环境下热量分配变化规律的研究、发动机热平衡模拟试验技术研究、开展高原环境柴油机冷却系统智能控制研究,以最优化匹配散热需求是未来发动机热平衡研究的方向。     

桃花江核电厂冷却塔对近场流动影响的风洞试验研究

采用雷诺数自准准则作为动力相似的判据,对冷却塔等建筑物及周围复杂地形进行风洞模拟.风洞实验采用1:1500的缩比模型,通过模拟实验,研究桃花江核电厂厂址冷却塔等建筑物及山体对厂址近场流场、放射性核素迁移扩散的影响,获得厂址近场大气扩散特征.实验表明:山体(建筑物)的存在引起流场的空气动力学畸变,越过山体(建筑物)各测点...     

迪那2气田液化气无水冷却工艺研究

迪那2气田液化气生产设计采用空冷加水冷工艺,存在能耗大和水冷器易腐蚀结垢等安全隐患。利用HYSYS软件对迪那2气田轻烃回收工艺进行分析,并增设液化气后冷器,利用脱乙烷塔气相对液化气进行冷却,通过醇烃液分离压力、后冷器及空冷器冷却能力等参数的模拟计算和优化,将醇烃液三相分离器压力由常规的2.5MPa提高至5MPa,取消醇烃液导热油加热和液化气水冷,降低了装置能耗,年节水1.44×104m3,节电1.45×105 kW.h,杜绝了水冷器腐蚀穿孔的安全隐患,最终提出了醇烃液高压分离+空冷器+后冷器的液化气无水冷却工艺。     

基于PLC的冷却系统自整定模糊控制研究

在机载产品地面试验过程中需要为其提供相应的冷却环境,可在受试产品发生改变时,制冷设备在传统控制算法下往往无法维持较为理想的控制结果,需要重新人工整定控制参数。为解决此问题,研究了基于PLC的冷却系统自整定模糊控制方法,该方法可在PLC内编写系统参数累加辨识程序,从而计算得到系统的模型参数以及初始控制参数,再通过模糊控制器对该参数进行实时整定。试验表明该控制方法可以对系统参数进行自动辨识,辨识结果能够反映模拟负载的功率变化趋势,控制结果无明显超调及稳态误差。将该方法应用于液冷机组,可以在被冷却对象发生较大变化时重新辨识控制器参数,免去人工进行参数调试的工序,加强了设备的通用性,获得良好的控制结果。