常压立式储油罐地震应力的有限元计算

采用有限元方法 ,考虑在静载和动载共同作用下 ,对常压立式拱顶储油罐的地震应力进行了计算分析 ,给出了轴向应力的分布状态 ;并与相关抗震设计规范中的验算公式得出的结果进行了比较。结果表明 :由于地震的动力作用 ,储油罐的受力状态不是均匀分布 ,出现了峰值和谷值 ,而这些应力峰值大于工业设备抗震鉴定标准和石油化工设备抗震鉴定标准中公式的计算应力值 ,这应引起足够的注意。     

玉兰油细胞的发育及其与器官结构发育的关系

利用石蜡切片法及半薄切片法对玉兰茎、叶、花和种子中油细胞的发育进行了研究,结果表明：在所研究的各器官中油细胞以相同的方式发生。油细胞原始细胞因其细胞质染色较深、细胞核大明显及液泡化程度低而易与周围组织细胞分辨,以后,原始细胞逐渐液泡化,最终形成一个中央大液泡,其细胞质及细胞核呈一薄层,当油细胞成熟时,其细胞质和细胞核解体,而大液泡充满整个油细胞腔,成为储油的囊,在一些油细胞中,可观察到怀形构造,但     

一种高压油管焊接质量评价方法

阐述了高压油管疲劳破坏的原理及危害,建立高压油管焊接质量评价力学模型,通过有限元分析技术对其许用位移输入进行计算,并结合应变测量技术,利用电动振动台,对高压油管焊接处的疲劳特性进行了试验验证。结果表明,此高压油管焊接质量评价方法是可行的,有限元分析技术和应变测量技术的结合使用,保证了试验的安全性和结果准确性,此外,利用电动振动台进行疲劳耐久试验,操作方便简单,成本相对较低,具有通用性。     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

高效石油烃降解菌的筛选及其对原油污染土壤的修复

从陕北原油污染土壤中筛选出7株高效石油烃降解菌,其中黄杆菌属CC-2、不动细菌属SC-5、假单胞菌属SC-6表现出较强的石油烃降解能力。通过单因素试验和正交试验考察总石油烃(TPH)降解效果的影响因素,得出各因素对TPH降解率影响程度的大小次序为:溶液p H降解温度降解菌接种量摇床转速,且在降解菌接种量为7%(φ)、溶液p H为7、降解温度为30℃、摇床转速为150 r/min的最适处理条件下,菌株SC-6的TPH降解率可达61.23%。原油污染土壤生物修复实验结果表明:高效石油烃降解菌的投加有利于土壤TPH降解率和酶活性的提高;"菌株SC-6+营养剂"组修复处理42 d后的TPH降解率可达57.59%。     

Optimization of extraction of oil and biodiesel from Thespesia populnea seed oil by alkali catalyst in India

Thespesia populnea oil was new source of biodiesel. Crude Thespesia populnea oil was used as feedstock for biodiesel production by alkali-catalyzed methanolysis. The reaction in the presence of NaOH as catalyst was carried out to investigate the optimum conditions and to study the effects of variables on the reaction. A methanol to oil ratio of 6:1, sodium methoxide catalyst concentration of 1.5%, mixing intensity of 250 rpm and reaction temperature of 60°C offered the best Thespesia populnea seed oil methyl esters (biodiesel) yield (92.6%). The methyl ester content under these optimum conditions was 92.6% w/w, and all of the measured properties of the Thespesia populnea biodiesel (TPME) met the international standards ASTM D 6751-02. The results reveal that all of the reaction variables in this study had positive effects on the reaction. The results of the present study indicated that TPME could be a potential alternative to petrodiesel     

Production of soybean ethanol-based biodiesel using CaO heterogeneous catalysts promoted by Zn,K and Mg

This article focuses on the optimization of the production of fatty acid ethyl esters from soybean oil using CaO-based heterogeneous catalysts. Three different catalytic promoters were evaluated: Magnesium, zinc, and potassium. The reaction has evaluated the promoter content (promoter to calcium molar ratio), catalyst load, alcohol to oil molar ratio, and temperature. Response surface methodology (RSM) was used to evaluate the influence of each variable on the yield of biodiesel. The addition of K₂O or MgO in the catalyst has enhanced the yield in fatty acid ethyl esters, while the use of ZnO as a promoter was not successful.     

The effect of industry activities on public support for ‘fracking’

Research suggests that previous, current, and prospective extractive industry activities influence perceptions of new development. Studies that have drawn this conclusion, however, have usually focused on specific projects in specific communities. Here, these factors are examined on an aggregate, national scale. Combining geospatial data on extractive industry activities and survey data from a nationally representative sample (N = 1061), the influence of extractive industry activities on support for fracking is studied. While limited evidence is found for the impact of proximity to oil and gas wells or production on support for fracking, employment levels in the natural resources and mining sector in the respondent’s county and residence in an area experiencing active oil and gas development significantly increase support for fracking. The results highlight the role of spatial and community factors in shaping support for energy development.     

生活垃圾催化热解液体产物特性

为探索生活垃圾催化热解液体产物特性变化规律,选取Na2CO3、CaO、Fe2O33种催化剂,利用固定床实验、红外分析(FT-IR)进行生活垃圾热解液体产物产率和组分特性研究.结果表明,热解终温600℃无催化剂时,生活垃圾热解液产率为39.80 wt％,添加3种催化剂后热解液产率均降低;生活垃圾分别添加1％的Na2CO3和CaO后,热解油氧含量由22.49％分别降低到20.12％和18.53％,低位热值由30.30 MJ/kg分别提高到33.79和32.74 MJ/kg;无催化剂时热解油成分为脂肪类、含氧化合物及少量芳香类混合物,加催化剂后热解油中芳香类物质峰面积比例显著增加,而含氧化合物峰面积比例降低,羟基类及羧酸类含氧化合物峰面积比例明显减少,其他含氧物峰面积比例却增加;CaO催化效果较明显,生活垃圾添加1％的CaO热解油中芳香类物质峰面积比例从4.36％增加到29.46％,含氧化合物峰面积比例由49.42％降低到23.12％,其中羟基类和羧酸类化合物峰面积比例分别由34.03％和10.65％降低到0.00％和3.34％,其他含氧化合物峰面积比例由4.73％增加到19.77％.     

嗜油菌NY3对蜡质油污泥无害化处理

蜡质油污泥(WOS)成分复杂,含大量老化原油、蜡质油、沥青质及其他化学药剂,属危险性固体废弃物,大量排放已成为石化企业可持续发展的障碍.研究利用铜绿假单胞菌NY3处理高浓度WOS的条件,结果表明,WOS∶木屑(m/m)(d =0.30 mm) 7∶1并结合热熔分散为最佳油污泥预处理条件;液相降解体系含油量为24.5 g/L时,6d内,油泥中C20以下的正构烷烃完全被去除,C21～C34和C35～C38大分子量正构烷烃去除率分别在91％ ～99％和78％ ～ 89％之间.添加鼠李糖脂能明显提高长链烃和多环芳烃的降解率.6d内210 mg/L鼠李糖脂使C29 ～ C38的降解率提高17.27％ ～36.65％,芘、菲分别提高13.67％和16.12％.添加葡萄糖和Fe2+的条件下,NY3菌可将油污泥转化成为糖蛋白,产量达28 g/L.