羟基乙叉二膦酸镀铜废液的处理及Cu~(2+)的高附加值资源化回收

采用Na BH4还原法将羟基乙叉二膦酸(HEDP)镀铜废液中的Cu~(2+)制备成纳米铜粉,并采用聚丙烯酰胺(PAM)对还原反应后的废液进行絮凝处理。研究了n(Cu~(2+))∶n(Na BH4)、还原反应温度、还原反应时间及PAM添加量对废液中剩余Cu~(2+)质量浓度的影响,并对回收的纳米铜粉进行了XRD和TEM表征。实验结果表明:当n(Cu~(2+))∶n(Na BH4)=4∶6、还原反应温度为50℃、还原反应时间为2 h时,废液中剩余Cu~(2+)质量浓度降低至1.1 mg/L,Cu~(2+)还原率达99.99%;可获得粒径为20~45 nm的近球型、高纯度、由多晶组成的纳米铜粉;当PAM添加量为10 mg/L时,废液中剩余Cu~(2+)质量浓度降至0.35 mg/L以下,达到GB 21900—2008《电镀污染物排放标准》(小于0.5 mg/L)的要求。     

土壤中零价铁还原3-氯硝基苯的作用

利用零价铁在常温常压下对土壤中的3-氯硝基苯的还原,对反应物和产物随时间的变化及反应的各个影响因素进行了研究。实验结果表明,零价铁能够有效地将3-氯硝基苯还原为3-氯苯胺,反应过程中没有检测到脱氯产物。其反应速率随铁粉用量、反应体系含水量的增加以及反应温度的升高而升高,随土壤初始pH值的升高而降低。在土壤中3-氯硝基苯含量约为2.5×10^-6 mol/g,铁粉使用量为25 mg/g,反应体系中含水量为0.75 mL/g,pH值为6.8时,在恒温生化培养箱(25±1)℃反应5 h后,3-氯硝基苯的还原率达到92.75％。     

Assessing the long-term supply risks for mineral raw materials—a combined evaluation of past and future trends

This paper develops a method for identifying and assessing long-term supply risks for mineral raw materials. The method is based on a combined evaluation of past and future supply and demand trends. By analysing raw material boom and bust cycles over the past 50 years, we have quantified indicators and defined benchmarks for identifying critical market situations. By applying the method, risks for supply shortage may be identified at an early stage. In addition, a numerical evaluation model has been developed for better comparison between various mineral raw materials. Compared to other assessment methods this method uses specific benchmarks for each raw material to better assess supply risks. The method is embedded within a systematic and comprehensive analytical approach.     

TR-01稠油乳化降粘剂研究

针对河南油田井楼区块稠油,自制TR-01乳化降粘剂,通过实验研究了其降粘性能、稳定性,确定了降粘剂TR-01最佳浓度为0.3%、最佳油水比为70∶30。实验结果表明:TR-01乳化降粘剂对井楼区块油井的普遍适用性较强,具有较好的乳化降粘作用(降粘率达到99%以上),地层水对其降粘效果影响不大。其中的纳米成分能增加对污水中悬浮物的吸附能力和絮凝能力,对油田污水处理起到积极作用。     

苏里格气田试气队伍节能减排工作现状及改进建议

苏里格气田试气队伍因涉及数家企业单位,节能减排工作有其特殊性和复杂性。通过调查试气过程中的排污状况,分析了其节能减排工作中出现的几个问题,如计量粗放、管理薄弱、措施简单等,提出了健全管理制度,完善计量系统,鼓励技术研究,加强自主创新,创建统一平台,依靠丙方监管等措施,以促进其节能减排工作健康有序地发展。     

曙光油田节能减排现状调查及对策研究

曙光采油厂随着超稠油的不断开发,生产能耗也随之增加,通过开展节能减排及节能挖潜工作,全厂能耗增长状态得到了良好的控制,能耗总量由2005年的58.21×10~4t标煤下降到2008年的47.75×10~4t标煤;原油(气)液生产单位综合能耗为52.02 kg标煤/t,同期对比减少0.38 kg标煤/t;生产系统运行效率不断提高。文章详细介绍了曙光油田从机采系统、热注系统、集输系统等方面推广应用节能新技术、新产品,达到其投资和运行费用最少,经济性较好,对油田减排挖潜进行了探讨。     

社会减灾能力信任及水灾风险感知的区域对比——基于江西九江和宜春公众的调查

研究公众对社会减灾能力及灾害风险的认识,有助于从公众视角揭示风险潜在因素,不仅是进行风险沟通的必备环节,还可以为开展有效的减灾宣传教育、提高公众减灾意识提供决策依据。通过社会调查（221份样本）和统计分析方法,比较了江西九江、宜春公众对于社会减灾能力的信任及水灾风险感知。结果表明,公众对于社会减灾能力基本持信任态度,信任度高低排序为：灾害监测预报>政府应急>防灾工程>预警传播,其中宜春公众的信任度较高;公众对于水灾的风险感知较弱,尤其是宜春公众认为水灾发生、受灾的可能性很小;公众的信任与对区域减灾能力的了解无关,主要是受到受灾经历（受灾次数、灾情损失、灾后救援）的影响,即区域本底灾害风险的高低导致公众认知的差异,风险较高区域（九江）的公众具有更为明确的降低风险的行为倾向及意愿。     

Power generation with CO2 capture: Technology for CO2 purification

The goal of this paper is to find methodologies for removing a selection of impurities (H₂O, O₂, Ar, N₂, SO_x and NO_x) from CO₂ present in the flue gas of two oxy-combustion power plants fired with either natural gas (467 MW) or pulverized fuel (596 MW). The resulting purified stream, containing mainly CO₂, is assumed to be stored in an aquifer or utilized for enhanced oil recovery (EOR) purposes. Focus has been given to power cycle efficiency i.e.: work and heat requirements for the purification process, CO₂ purity and recovery factor (kg of CO₂ that is sent to storage per kg of CO₂ in the flue gas). Two different methodologies (here called Case I and Case II) for flue gas purification have been developed, both based on phase separation using simple flash units (Case I) or a distillation column (Case II). In both cases purified flue gas is liquefied and its pressure brought to 110 atm prior to storage.Case I: A simple flue gas separation takes place by means of two flash units integrated in the CO₂ compression process. Heat in the process is removed by evaporating the purified liquid CO₂ streams coming out from both flashes. Case I shows a good performance when dealing with flue gases with low concentration of impurities. CO₂ fraction after purification is over 96% with a CO₂ recovery factor of 96.2% for the NG-fired flue gas and 88.1% for the PF-fired flue gas. Impurities removal together with flue gas compression and liquefaction reduces power plant output of 4.8% for the NG-fired flue gas and 11.6% for the PF-fired flue gas. The total amount of work requirement per kg stored CO₂ is 453 kJ for the NG-fired flue gas and 586 kJ for the PF-fired flue gas.Case II: Impurities are removed from the flue gas in a distillation column. Two refrigeration loops (ethane and propane) have been used in order to partially liquefy the flue gas and for heat removal from a partial condenser. Case II can remove higher amounts of impurities than Case I. CO₂ purity prior to storage is over 99%; CO₂ recovery factor is somewhat lower than in Case I: 95.4% for the NG-fired flue gas and 86.9% for the PF-fired flue gas, reduction in the power plant output is similar to Case I.Due to the lower CO₂ recovery factor the total amount of work per kg stored CO₂ is somewhat higher for Case II: 457 kJ for the NG-fired flue gas and 603 kJ for the PF-fired flue gas.     

基于连通法的甲烷简化机理构筑研究

采用连通法,针对甲烷复杂反应机理,成功地进行了不同水平的机理简化研究。通过建立组分依赖关系的正规化Jacobian矩阵,精确地查明了燃烧组分之间的耦合关系,分别构造出仅包含重要化学路径的两个动力学简化模型,获得的简化机理分别包含227和138个反应,分别涉及39和26种组分。通过对层流预混火焰结构的模拟,所得简化机理和原详细反应动力学机理关于火焰结构的计算吻合很好,计算结果显示,两个简化机理具有较高的模拟精度。