二维平流扩散模型下的集合卡尔曼滤波模拟同化研究

为提高环境数值预报水平,构建了一个针对污染物扩散的模拟数据同化系统。采用集合卡尔曼滤波方法对二维平流扩散模型的状态变量进行了实时校正,实现污染物浓度的实时模拟预报,完成了敏感性实验中集合数目变化、观测方差变化和同化窗口长度变化研究。比较考察观测点位置与污染源距离不同时的预报效果,探讨了优化条件下的同化策略,提出一种根据距离远近动态调节卡尔曼增益权重的方法。在集合数目较小时,可降低计算代价,得到优化的同化效果。     

Determination of organochlorine and organophosphate pesticide residues in fruits,vegetables and sediments

Abstract

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean‐up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean‐up for sediment extract was carried out on a10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL.

The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'‐DDT and endosulfan sulphate, which was 0.01 mg/kg.

The detection limit for oganochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 μg/kg and for organophosphate pesticides less than 10 μg/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Diffusion mechanism of lindane into wood charcoal

Abstract

The wood charcoal treated by 1N HNO₃ (WCT) was used to remove toxic chlorinated pesticide lindane (y‐HCH) residue from water by the sorption process. Using a simple first order reversible kinetics constants and half time equations, the film and pore diffusion coefficients were determined. Film diffusion was found to be rate limiting step in sorbing lindane by WCT. This was further authenticated by kinetics studies at different initial sorbate concentrations, different sorbent sizes, and different agitation speeds besides interruption test. A pore diffusion model was used to fit the data of kinetics in continuously mixed batch reactors (CMBR), and the tortuosity, external resistance, and surface diffusion effects on lindane sorption by WCT were noticed. The tortuosity values of 15 to 28 were obtained for WCT‐lindane system.     

Impacts of Upstream Building Width and Upwind Building Arrangements on Airflow and Pollutant Dispersion in a Street Canyon

A two-dimensional numerical model for evaluating the wind flow and pollutant dispersion within a street canyon was first developed using the FLUENT code, which was then validated against a wind tunnel experiment. Then, the effects of the upstream building width and upwind building arrangement on the airflow and pollutant dispersion inside an isolated street canyon were investigated numerically. The numerical results revealed that: (1) the in-canyon vortex center shifts downwards as the upstream building width increases; (2) the recirculation zone covers the entire upstream building roof for the cases when W/H = 0.5, 1.0, 1.5, and 2.0 (W is the upstream building width and H is the building height), whereas the flow reattaches the upstream building roof for the cases when W/H = 2.5 and 3.0; (3) when the upstream building width is shorter than the critical width W_C (= 2H), an increase in the upstream building width leads to an increase in the pollution level on the leeward wall of the canyon and a decrease in the roof-level concentrations at the upstream building; (4) when the upstream building width is longer than the critical width, the roof-level concentrations at the upstream building are negligibly small and the pollution level on the leeward wall of the canyon is almost unaffected by a further increase in the upstream building width; (5) when the buildings are placed upwind of the canyon, the flow attaches the upstream building roof and, therefore, almost none of the pollutants are distributed on the upstream building roof; and (6) the pollution levels inside the canyon and on the downstream building roof increase significantly with the number of upwind buildings.     

Potential and Shortcomings of Numerical Weather Prediction Models in Providing Meteorological Data for Urban Air Pollution Forecasting

The last decade progress in numericalweather prediction (NWP) modelling and studies of urbanatmospheric processes for providing meteorological data forurban air pollution forecasting is analysed on examples ofseveral European meteorological centres. Modern nested NWP models are utilising land-use databasesdown to 1 km resolution or finer, and are approaching thenecessary horizontal and vertical resolution suitable forcity scale. The recent scientific developments in the fieldof urban atmospheric physics and the growing availabilityof high-resolution urban surface characteristics datapromise further improvements of the capability of NWPmodels for this aim. A strategy to improve NWP data forthe urban air pollution forecasting is suggested.     

煤体注水湿润半径预测的神经网络模型

合理的注水半径一直是煤体注水防尘技术中难以确定的参数。笔者基于对影响煤体注水半径因素的分析和神经网络理论的原理之上 ,设计网络模型为 3层 ,输入层为 7个节点 ,应用BP网络算法 ,建立了煤体注水湿润半径的预测模型 ,并对其参数进行了讨论。然后 ,用平顶山矿务局和水城矿务局 13个矿 19个回采工作面的统计资料对BP网络进行自适应学习 ,并取η =0 .9,α =0 .82 ,控制网络总误差E≤ 10 6。经过 2 12 34次迭代后 ,网络趋于稳定。用训练好的网络对平顶山矿务局的某矿的 3层煤的注水湿润半径进行预测 ,预测结果与实测值很接近。其误差分别为 0 .5 %,0 .6 %和 0 .7%。     

烟气扩散的CFD数值模拟

运用商业CFD软件Fluent模拟计算小尺寸下的简单烟气扩散规律.将结果用正态分布假设下的高斯烟羽模型验证.证明该软件模拟烟气扩散问题的可行性.     

南山铁矿风场及扩散规律风洞模拟研究

以风洞模拟方式研究中性层结条件下南山铁矿凹山采场地域边界层风场特征,并以示踪气体扩散摸拟方法给出该地域大气扩散参数的实验结果。     

带防腐层在役压力容器表面磁粉探伤灵敏度的试验研究

采用人工裂纹试样的方法 ,模拟压力容器涂刷油漆防腐层的状况进行磁粉探伤 ,得出了油漆防腐层厚度与裂纹检出灵敏度的定量关系 ;结合CVDA《压力容器缺陷评定》规范 ,探讨了试验方法对一般在役压力容器带有油漆的情况下 ,进行磁粉探伤检验的可行性。研究表明 :采用交流磁化法进行探伤 ,当漆层厚度大约小于2 5 0 μm时 ,灵敏度影响较小 ,同时亦表明不宜使用直流磁化方法。该结论对承受低应力工况条件下的压力容器安全质量检验和评估 ,具有重要参考价值     

最大剪切模量对土动力参数及地震反应的影响

最大剪切模量是影响土的动剪切模量比、阻尼比和土层地震反应的最重要参数之一。通常采用室内应变法来确定最大剪切模量，给出土的动剪切模量比和阻尼比，而采用现场剪切波速法求得的结果则很少见。研究了剪切波速法和应变法所确定的最大剪切模量对土动剪切模量比、阻尼比和土层地震反应的影响，推导了两种方法所确定的动剪切模量比和阻尼比之间的关系式。结果表明：最大动剪切模量对土的动剪切模量比、阻尼比和土层地震反应的影响很显著。