草酸作用下海洋疏浚物中Cr的释放动力学研究

采用恒温振荡实验装置,系统研究了有机酸草酸降解海洋疏浚物中重金属Cr的动力学过程。结果表明,恒温振荡6 h后,浓度为0.05~0.4 mol/L的草酸可使Cr的释放百分率达到24%~44%。Cr的释放总体上可分为快速反应和慢速反应2个阶段,0~2 h为快反应阶段,解吸速率快,2~6 h后为慢反应阶段。草酸对Cr的释放动力学数据可用双常数方程很好的拟合,说明在草酸的存在下,疏浚物颗粒表面对Cr的释放可能更多表现出能量的不均匀性。温度升高时Cr的解吸量增加,反应速度加快,根据阿累尼乌斯公式估算出的活化能为26.53 kJ/mol。     

矿用聚氨酯注浆材料阻燃及加固性能研究

为获得压缩强度和阻燃性能兼顾的聚氨酯注浆材料,通过L9(34)正交试验,研究Mg(OH)2含量、甲基膦酸二甲酯(DMMP)含量、异氰酸酯指数、辛酸亚锡含量对聚氨酯注浆材料的阻燃性能及压缩性能的影响。获得这种聚氨酯注浆材料的最佳制备条件。对比分析最佳制备条件试样及不加阻燃剂试样的热稳定性。结果表明:DMMP含量和Mg(OH)2含量对平均燃烧时间影响显著;Mg(OH)2还有补强加固作用,对压缩强度影响最为显著,其次为异氰酸酯指数。在Mg(OH)2,DMMP,辛酸亚锡质量分数分别为16%,24%和0.4%,异氰酸酯指数为1.10时,聚氨酯注浆材料兼顾阻燃性能和压缩性能,平均燃烧时间为13.9 s,压缩强度为19 MPa,其热稳定性明显优于不添加阻燃剂样品。     

阻挡放电联合金属氧化物催化降解H2S的研究

采用介质阻挡放电联合金属氧化物催化降解气态H2S,考察了单组分及复合金属氧化物催化剂、催化剂与低温等离子体结合方式对H2S及副产物O3去除性能的影响,分析了等离子体联合Mn复合金属氧化物催化降解H2S机理。结果表明,金属负载量相同条件下,电压低于22kV时,Mn复合金属氧化物对H2S的催化活性高于单组分Mn金属氧化物,催化活性及对O3的分解能力从大到小依次为:Ag+Mn、Cu+Mn、Fe+Mn、Mn。当电压为18 kV时,Ag+Mn、Cu+Mn、Fe+Mn复合催化剂分别比单组分Mn催化剂对H2S的去除效率提高了近10%、6%、4%。等离子体后催化区域中Mn催化剂催化氧化H2S的效率明显低于等离子体催化区域。Mn催化剂在等离子体后催化区域中能有效催化分解O3。随着电压的升高,Mn金属氧化物在等离子体后催化区域对H2S催化作用逐渐增强。在电压22 kV时,等离子体联合后催化比单独等离子体作用时,H2S去除效率提高了近11%。     

浮顶储罐导电片间隙放电危险性研究

储罐在实际运行中,受浮盘的上下移动、机械应力、老化、油污、金属腐蚀等因素的影响,很难确保导电片与罐壁紧密贴合,容易形成微小间隙,在这种情况下遭受雷击易产生间隙放电,出现打火现象.为了分析导电片与储罐罐壁导电片产生间隙放电的危险性,根据Townsend气体放电理论计算了导电片和储罐罐壁间的击穿电压,采用1.2/50μs冲击电压波开展了导电片间隙放电实验,分析了导电片击穿电压与空气间隙距离的关系.结果证明:当导电片和罐壁贴合不良时,导电片和罐壁之间极易产生火花放电;当空气间隙d=0.1cm时,平均空气击穿电压仅为5280V;随着间隙的增大,空气击穿电压也随之增大;导电片间隙放电实验数据与Townsend气体放电理论值吻合.最后,根据以上结论,针对浮顶储罐导电片间隙放电的危险性,提出了改进措施.     

基于不同强度等级混凝土的动力学特性研究

基于TAW-2000D电液伺服岩石三轴仪和直径75 mm的霍普金森压杆试验装置,得到了C25,C35和C45混凝土在静、动载荷作用下的应力-应变曲线,探讨了混凝土强度等级、动态峰值强度、峰值应变和应变率之间的变化规律。结果表明:混凝土准静态应力-应变曲线和动态应力-应变曲线在形态上存在明显差异,动态应力-应变曲线的峰值点随应变率的增大向右上方移动,线弹性阶段各曲线斜率变化不明显;动态峰值应力、动态弹性模量和峰值应变均存在不同程度的率相关性,并且混凝土材料的应变率敏感性随其强度等级的提高而增强;混凝土C45的各力学指标对应变率的敏感性最强,C35次之,C25的应变率敏感性最弱;推导了应变率与强度等级和冲击速率之间的经验公式,三者之间存在非线性变化规律。     

矿井瓦斯控爆技术及材料研究进展

瓦斯爆炸灾害防治一直是我国煤矿安全研究的热点、难点。通过对国内外相关文献总结分析,从瓦斯抑爆装置、抑爆介质及抑爆机理3个方面综述了目前国内外矿井瓦斯抑爆技术及抑爆材料的研究现状,提出了未来的发展方向。研究结果表明:瓦斯抑爆技术的有效性和可靠性主要取决于抑爆介质的物理化学性质、控爆空间几何参数、爆炸特性参数和抑爆系统中爆炸探测方式等因素;结合瓦斯爆炸链式反应理论和探测技术的发展,研究应更多地关注抑爆过程的微观特性,揭示其详细的抑爆作用机理,为探寻新型高效、绿色抑爆材料提供更有力的理论支持。     

Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

水分调节材料对牛粪堆肥氨气挥发的影响

利用通风式堆肥发酵方式研究了牛粪堆制过程中氨气的挥发特征和锯末、稻壳、稻草等不同水分调节材料对氨气挥发的影响。结果表明,牛粪堆制过程中主要在前期,尤其是在最初的2周内释放氨气;堆肥期间挥发的氨态氮约为牛粪总含氮量的17%～50%。不同水分调节材料都可以在一定程度上抑制氨气的挥发,但锯末抑制氨气挥发效果最好,其次是稻壳,稻草抑制氨气挥发的效果较小。因此,为了减少氮素损失,应采取适当措施抑制氨挥发或回收挥发的氨气。     

长江口疏浚土掩埋对两种贝类存活的影响

疏浚土处置产生的土丘状浮泥,会掩埋原有底质,底栖生物被掩埋后或死亡,或垂直向迁移重新获得生存机会,而使底栖生物群落得以重建.为评价疏浚土掩埋对底栖生物存活的潜在影响,采用长江口深水航道工程疏浚土模拟掩埋尖紫蛤(Sanguinolaria acuta)、文蛤(Meretrix meretrix),观测两种贝类对不同埋深的反应及其存活情况.结果表明,文蛤和尖紫蛤被掩埋后均表现出垂向迁移行为,文蛤比尖紫蛤表现出了更强的垂向迁移能力,当掩埋深度为8cm时,可100%迁移至疏浚土表层,获得存活机会,而尖紫蛤仅50%左右个体的进出水管伸出疏浚土表层;疏浚土掩埋深度与尖紫蛤死亡率之间有极其显著正相关关系(R2=0.967,P=0.007<0.01),并求得4d-LC50为6.9cm,95%置信区间5.2~8.6cm.试验所设置掩埋深度与文蛤死亡率之间没有表现出显著相关关系,难以通过统计方法获得文蛤的4d-LC50;借鉴毒理学中推定LOEC(最低有影响深度)的方法,推定文蛤的LOED为10cm.研究表明,疏浚土处置后的沉积厚度对底栖动物种群的存亡具有决定性作用,而底栖动物在被掩埋后表现出的垂向迁移能力大小也可影响自身种群及处置区整个底栖动物群落的最终重建几率,并且积极的管理策略对底栖群落重建意义重大.表4图1参22     

Diatom Thalassiosira weissflogii in oligotrophic versus eutrophic culture: models and ultrastructure

Populations of marine diatom Thalassiosira weissflogii were grown in continuous cultures enriched with f/2 medium. One of the two contrasting cultures (‘eutrophic’) received 5.6 times more nutrients than the other (‘oligotrophic’). Two mathematical models are analyzed to estimate eutrophication differences. The second model based on the Michaelis–Menten uptake and Droop growth shows that cells in the eutrophic culture should have about 56% higher content of silica which is the limiting nutrient. Diatom samples were prepared for the transmission electron microscopy after cells have been kept in chemostats for 37 days. The structure of diatom cells was investigated and a comparison is made between cells grown in oligotrophic and eutrophic conditions. In eutrophic culture, dividing cells were encountered more frequently while cell concentration was approximately equal in both chemostats. The central vacuole of cells in eutrophic culture accumulated dispersed and compact material from amorphous to spherical shape. In some cells the large central vacuole had fibrilar and peppered dense materials in addition to translucent granules, vesicules and multivesicular bodies. In the cytoplasm we found increased number of multivesicular bodies, dense and lucent granules some of which enclose membrane particles and lucent vesicules. Dense material depositions observed in the vacuole are also seen in the cytoplasm associated with organelles, mitochondria and plasmalemma. Cells have well-developed, active and slightly increased number of dictyosomes (5–6). Some dictyosomes with dense secretory material in the cistern are apparently engaged in a granule formation process. Functional significance of dense material in the central vacuole, which has not been observed in cells grown in oligotrophic condition, is discussed.