Environmental assessment of supercritical water oxidation of sewage sludge

Environmental aspects of using supercritical water oxidation (SCWO) to treat sewage sludge were studied using a life cycle assessment (LCA) methodology. The system studied is the first commercial scale SCWO plant for sewage sludge in the world, treating sludge from the municipal wastewater treatment facility in Harlingen, TX, USA. The environmental impacts were evaluated using three specific environmental attributes: global warming potential (GWP), photo-oxidant creation potential (POCP) and resource depletion; as well as two single point indicators: EPS2000 and EcoIndicator99. The LCA results show that for the described process, gas-fired preheating of the sludge is the major contributor to environmental impacts, and emissions from generating electricity for pumping and for oxygen production are also important. Overall, SCWO processing of undigested sewage sludge is an environmentally attractive technology, particularly when heat is recovered from the process. Energy-conserving measures and recovery of excess oxygen from the SCWO process should be considered for improving the sustainability potential.     

客户关系生命周期管理及其策略

客户关系生命周期理论的提出对服务经济时代的企业产生了巨大的影响,该理论在强调了客户关系存在周期性的同时,也提出了对客户关系应当进行阶段性管理;阐述了客户关系生命周期理论,并在此基础上提出了客户关系动态发展模型,旨在帮助管理人员更清楚地认识到客户关系的长期价值和对客户关系的各个阶段进行良好的管理.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

How farmers develop local ecological knowledge for on-farm tree management: The perspectives of some farming communities of Ghana

Scientific insights into what it means to manage on-farm trees by local farmers, is an essential step towards documenting local ecological knowledge for sustainable landscape management. A study was therefore conducted in the Kumawu Forest District in the Ashanti Region of Ghana to assess how farmers conceptualise on-farm tree management and develop local knowledge for it. Using a case study approach, data were collected through informal interviews and focus group discussions with 120 farmers drawn from 15 communities who were involved in the management of three cropping systems; cocoa, maize and cassava-cocoyam-plantain mix. It was observed that the farmers regard on-farm tree management as a continuous process which occurs in three phases of the farming cycle; land preparation, crop cultivation and fallow management. For each of the three phases, farmers are guided by specific principles that ensure enough light penetration in-between tree crowns in the land preparation phase, suitable spacing between trees and crops in the crop cultivation phase and adequate tree regeneration in the fallow phase. The decisions made during the selection of tree species, spacing of trees adjudged suitable for any particular cropping system and recruitment of saplings prior to the fallow phase of farming constitute tree management. Farmers develop tree management knowledge by studying the physical characteristics of species, matching them to ecological functions they could perform and how they are likely to respond to treatments meant to control or enhance their development. Species are then subjected to trial and recommended or otherwise.     

Bibliometric analysis of simulated driving research from 1997 to 2016

Objective: The objective of this study was to explore the evolution footprints of simulated driving research in the past 20 years through rigorous and systematic bibliometric analysis, to provide insights regarding when and where the research was performed and by whom and how the mainstream content evolved over the years.

Methods: The analysis began with data retrieval in Web of Science with defined search terms related to simulated driving. BibExcel and CiteSpace were employed to conduct the performance analysis and co-citation network analysis; that is, probe of the performance of institutes, journals, authors, and research hotspots.

Results: A total of 3,766 documents were filtered out and presented an exponential growth from 1997 to 2016. The United States contributed the most publications as well as international collaborations followed by Germany and China. In addition, several universities in The Netherlands and the United States dominated the list of contributing institutes. The leading journals were in transportation and ergonomics. The leading researchers were also recognized among the 8,721 contributing authors, such as J. D. Lee, D. L. Fisher, J. H. Kim, and K. A. Brookhuis. Finally, the co-citation analysis illuminated the evolution of simulated driving research that covered the following topics roughly in chronological order: task-induced stress, drivers with neurological disorders, alertness and sleepiness while driving, trust toward driving assistance systems, driver distraction, the effect of drug use, the validity of simulators, and automated driving.

Conclusions: This article employed bibliometric tools to probe the contributing countries, institutes, journals, authors, and mainstream hotspots of simulated driving research in the past 20 years. A systematic bibliometric analysis of this field will help researchers realize the panorama of global simulated driving and establish future research directions.     

Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives

The continuously increasing solid waste generation worldwide calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, life cycle assessment (LCA) is a tool, which can contribute to answer that call. But how, where and to which extent has it been applied to solid waste management systems (SWMSs) until now, and which lessons can be learnt from the findings of these LCA applications? To address these questions, we performed a critical review of 222 published LCA studies of SWMS. We first analysed the geographic distribution and found that the published studies have primarily been concentrated in Europe with little application in developing countries. In terms of technological coverage, they have largely overlooked application of LCA to waste prevention activities and to relevant waste types apart from household waste, e.g. construction and demolition waste. Waste management practitioners are thus encouraged to abridge these gaps in future applications of LCA. In addition to this contextual analysis, we also evaluated the findings of selected studies of good quality and found that there is little agreement in the conclusions among them. The strong dependence of each SWMS on local conditions, such as waste composition or energy system, prevents a meaningful generalisation of the LCA results as we find it in the waste hierarchy. We therefore recommend stakeholders in solid waste management to regard LCA as a tool, which, by its ability of capturing the local specific conditions in the modelling of environmental impacts and benefits of a SWMS, allows identifying critical problems and proposing improvement options adapted to the local specificities.     

Review of LCA studies of solid waste management systems – Part II: Methodological guidance for a better practice

Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of the provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs.     

喀斯特常绿与落叶阔叶混交林过去50年来的碳循环模拟

通过对Forest-DNDC模型的植被和土壤参数本地化校准,以气象插值数据为输入,模拟了贵州省普定县高原型喀斯特次生常绿与落叶阔叶混交林1965~2014年的土壤、植被和生态系统碳循环特征。结果表明,与冷模拟和实测值相比,参数本地化校准后的模型能更准确地模拟春、秋、冬3个季节的土壤呼吸动态,而模拟的夏季土壤呼吸偏小;但统计检验指出,参数修订后的Forest-DNDC模型能够较好地模拟喀斯特森林土壤呼吸,降低了模拟误差,可用于喀斯特常绿与落叶阔叶混交林碳动态的模拟。进一步分析发现,1965~2014年喀斯特森林的碳通量除模拟早期的前3~4年急剧增加之外,随后总初级生产力(GPP)保持相对稳定,植物呼吸(Rplant)和生态系统呼吸(R_(ecosystem))随着森林发育而增加,土壤呼吸(R_(soil))减少,植被净初级生产力(NPP)呈迅速减小趋势;净生态系统碳交换量(NEE)亦较迅速下降,在2013年达到最低值-0.17 t C/ha,喀斯特森林由碳汇变为弱碳源。相关分析表明,年均温度和年降水对喀斯特常绿与落叶阔叶混交林的GPP和R_(soil)没有显著影响,但却显著影响NPP、R_(plant)、R_(ecosystem)和NEE。     

阿哈水库叶绿素a时空分布特征及其与藻类、环境因子的关系

为了解阿哈水库叶绿素a(Chl-a)时空分布特征及其与藻类、环境因子的关系,于2012年枯水期至2013年平水期、丰水期对藻类与理化指标进行分层采样.结果表明Chl-a季节变化明显,与藻类生物量季节变化较为一致,而与丰度差别较大,平水期发生甲藻水华,浓度最高(91μg·L~(-1)),枯水期与丰水期相对较低,分别为8μg·L~(-1)与16μg·L~(-1).枯水期与丰水期水体表层Chl-a浓度略高于中、底层,表层光照、溶解氧相对充足,利于藻类生长;平水期表层Chl-a浓度远高于中、底层,易在表层聚集的甲藻水华是主要原因.大坝Chl-a浓度高于库中,这可能是大坝位于金钟河入库口,营养盐高于库中的缘故.相关性分析得出Chl-a与甲藻门呈极显著正相关(R=0.798,P0.01);Chl-a与TP、DO、pH呈极显著正相关(R=0.762,P0.01;R=0.792,P0.01;R=0.658,P0.01),与TN显著正相关(R=0.388,P0.05)与N/P、NO_3~--N显著负相关(R=-0.37,P0.05;R=-0.435,P0.05).逐步回归分析得出DO、TP、N/P为影响阿哈水库Chl-a分布的主要因子.此外热分层以及水温对Chl-a的影响也不容忽视.     

基于生命周期评价的城市固体废弃物处理模式研究进展

通过回顾2003-2010年国内外不同城市固体废弃物管理体系生命周期评价结果,列举比较了不同固体废弃物处理模式下的全球变暖潜力、酸化潜力和净能源效用等影响评价因子的大小,得出城市固体废弃物处理模式环境影响等级:填埋的环境影响潜值最大,焚烧的环境影响潜值小于填埋,而结合堆肥后环境影响潜值降低;此外,将固体废弃物资源化引入到处理模式后,特别是垃圾源头分类回收后,环境影响潜值大大降低。结合我国城市固体废弃物处理现状,提出单一的处理模式应转变为综合处理模式,多种生活垃圾处理方式适当的有机结合,因地制宜地开展固体废弃物资源化管理,以及餐厨垃圾源头分类收集处理等建议,为政府能有效利用城市固体废弃物处理设施的能力提供参考。