以电子环保标志为载体构建机动车污染控制物联网体系

以南京为例,探讨以电子环保标志为载体,以射频识别技术构建机动车污染控制物联网体系,通过绿色智能交通系统、公交优先通行系统、高污染车限行执法系统、不同排放标准车辆的通行控制系统、机动车环保远程核查系统、交通污染智能监测在线调控系统、机动车污染联防联控系统、职能部门信息共享系统的建立,达到控制机动车污染、改善交通拥堵、提高...     

电子废弃物理化性质研究

通过实验研究了印刷线路板和覆铜板厚度、热值及含水率等理化性质,并对其中的金、铜等贵金属含量进行了测定.结果显示,PCB和CCL的厚度分别是0.108 cm和0.054cm;PCB和CCL的高位定容弹筒发热量分别为8 310 J/g和9 320 J/g; PCB和CCL的含水率分别为接近1.3％和接近0.8％;PCB和C...     

道路车辆电工电子设备高加速应力筛选和稽核

成熟的汽车企业已经将高加速环境应力筛选和稽核引入装车电工电子设备的研发、试产和批量供货的管理中,其需求已进入国内检测市场。在讨论了高加速寿命试验(HALT)基础上,介绍并讨论高加速应力筛选(HASS)和稽核(HASA)的各项要素和实验室要求。     

危险废物鉴别监测现状、问题及建议研究

危险废物鉴别技术是危险废物监管中重要的技术支撑。现有的危险废物鉴别技术在危险废物监管中发挥了巨大的作用,但在实际鉴别工作中,还存在一些不足。对危险废物鉴别工作现状进行了具体阐述,同时指出了危险废物名录灵活性不够、危废鉴别标准项目待梳理、鉴别时间周期长、采样数大等存在的问题,并针对性提出解决问题的工作建议。     

电子部件失效模式试验与仿真研究

目的研究焊点在热应力下的等效应力和等效蠕性应变。方法通过测定某子弹电子部件的工作极限温度、破坏极限温度,利用阶梯变化的温度来验证电子部件的极限适应温度,找出电子部件的主要失效模式。通过有限元仿真来模拟热载荷作用下焊点的应力应变行为。结果应用Garofalo模型仿真得出的蠕变效应与实际试验结果基本相近。结论通过仿真方法与试验结果相对比,证明使用Garofalo模型来研究电子部件焊点的蠕变效应是可行的。     

Distribution characteristics and source identification of polychlorinated dibenzo-p-dioxin and dibenzofurans, and dioxin-like polychlorinated biphenyls in the waters from River Kanzaki, running through Osaka urban area, Japan

This is the first to elucidate the distribution and sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs),and dioxin-like polychlorinated biphenyls in the waters from Kanzaki River,which is one of the most heavily polluted rivers in Japan.The World Health Organization (WHO)-toxic equivalent quantities (TEQs) in waters from the mainstream exceeded the Japanese environmental standard (1.0 pg-TEQ/L).The PCDD/PCDFs were dominated by highly chlorinated DFs,which predominantly contributed to the WHO-TEQs,suggesting that the main causes would be the incineration-related wastes.To find the sources,the dioxin congener concentrations in water and sediment samples from its tributary small waterways were determined.Abnormally high WHO-TEQs were detected in a water (50 pg-TEQ/L) and a sediment sample (41,000 ng-TEQ/kg dry weight) near the industrial solid waste incinerators (ISWIs).The PCDD/PCDF characteristics agreed well with those of the incinerator-related wastes as seen in the mainstream.These facts indicate that the dioxin pollution in the mainstream could be largely related to the industrial wastes from the ISWIs.Here,a TEQ apportionment method was used to understand the contribution of the pyrogenic sources to the WHO-TEQs.The average contribution ratios of the pyrogenic sources to WHO-TEQs were more than 80% for river waters from the mainstream,indicating that the elevated WHO-TEQs in the mainstream had been largely caused by the ISWIs.     

Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements

This article analyses the current and future end-of-life management of electronic displays (flat screen televisions and monitors), and identifies and discusses possible ecodesign recommendations to improve it. Based on an investigation of the treatment of displays in two typical European recycling plants, key aspects and criticalities of the recycling methods (sorting, dismantling and pre-processing) are identified. Disaggregated data concerning on-site measurements of the time needed to manually dismantle different displays are presented. The article also discusses the potential evolution of end-of-life scenarios for electronic displays and suggests possible recommendations for recyclers, producers and policy-makers to promote resource efficiency in the recycling of such waste products. Data on time for dismantling the displays can be used to build measurers for voluntary and mandatory policies, to stimulate design innovations for products improvement, and to assess possible alternative treatments of the waste during the pre-processing at the recycling plants. Some quantitative product measures (based on the time thresholds for dismantling some key components) are also discussed, including an assessment of their economic viability. These measures can potentially be enforced through mandatory and voluntary European product policies, and could also be extended to other product groups.     

电子行业VOCs的源头控制与末端治理技术探讨

电子行业是我国国民经济的支柱产业,也是近年来VOCs污染防治的重点行业,通过对电子行业的VOCs产生环节的分析,探讨了电子行业VOCs的源头控制与末端治理技术。     

超声萃取GC/MS法测定电子电气产品中12种邻苯二甲酸酯的含量

建立了超声萃取GC/MS法测定电子电气产品中12种邻苯二甲酸酯类增塑剂的方法。结果表明:该方法简单快速,灵敏度高,相对标准偏差小于10%,加标回收率为86%~109%;样品处理过程中采用化学毒性小的乙酸乙酯作为萃取溶剂,绿色环保。经过对多批次的各种电子电气产品中12种邻苯二甲酸酯分析测定,均得到满意结果。     

破胶固化工艺处理钻井废物的应用研究

针对川渝地区钻井液的特点,确定川渝地区钻井废物无害化处理的工艺技术——破胶固化处理工艺。文章选取2006--2009年间实例展开论述,通过现场试验和监测技术相结合,总结出从废水处理、废物无害化处理、固体浸出液监测、停检点确认、余池处理等方面的过程管理办法。无害化治理工程效果显著,具有重要的指导性和实用性。