Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.     

环境空气SO2自动监测仪的维护

分析环境空气二氧化硫（SO2）自动监测仪故障产生原因,提出判断和处理故障的维修方法。     

CE-QUAL-W2模型应用探讨

通过二维纵向横向平均水动力学和水质模型(CE-QUAL-W2模型)对山仔水库进行水力学和水质的模拟,运用2006年4月至2006年5月的实际观测数据校正模型参数,并对山仔水库不同流量下的水质情况进行预测.模拟结果显示:温度分布在水库水体中存在空间和时间的异质性:水质重要组分如溶解氧,浮游生物量,总溶解固体,正磷酸盐,硝酸盐氮等的模拟值同观测值非常相近:调节水库的流量对改善水体水质情况有很大的作用.     

金属掺杂纳米TiO2薄膜的制备和抗菌性能研究

采用sol—gel法在载玻片表面制备了Ce,Cu,i．a,Ag掺杂的锐铁矿相TiO2薄膜,并通过SEM,XRD．FT—IR及UVVIS进行了表征,比较了薄膜的抗菌性能．UV—VIS研究表明,金属掺杂纳米TiO2薄膜在近紫外区吸光度有明显提高。抗菌实验表明掺Ag的TiO2薄膜抗菌效果最佳。     

Selective removal of 2,4-dichlorophenoxyacetic acid from water by molecularly-imprinted amino-functionalized silica gel sorbent

A molecularly-imprinted amino-functionalized sorbent for selective removal of 2,4-dichlorophenoxyacetic acid(2,4-D) was prepared by a surface imprinting technique in combination with a sol-gel process.The 2,4-D-imprinted amino-functionalized silica sorbent was characterized by FT-IR,nitrogen adsorption and static adsorption experiments.The selectivity of the sorbent was investigated by a batch competitive binding experiment using an aqueous 2,4-D and 2,4-dichlorophenol(2,4-DCP) mixture or using an aqueous 2...     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

纳米催化剂Pd/SnO_2的制备及催化还原硝酸盐反应的调控

采用热分解法制备了SnO2载体,并用浸渍法制备了Pd/SnO2催化剂.同时,采用X射线衍射仪(XRD)、透射电镜(TEM)、扫描电镜(SEM)及BET比表面积仪等对所制载体和催化剂材料进行了分析表征.结果表明,热分解法和浸渍法都能够获得纳米材料,SnO2及Pd/SnO2的粒径均在9～10nm左右,比表面积分别达到144.99m·2g-1和147.36m·2g-1.在以甲酸为还原剂的Pd/SnO2催化还原硝酸盐体系中,在Pd与SnO2负载比为2%～7%,反应温度为20～50℃和甲酸投加量4.0～24.0mmol·L-1的条件下,催化活性为0.70～9.48mg·min-·1g-1,且催化活性随着负载比、温度和甲酸投加量的增大而增大,随着pH的升高先升后降,最佳pH为3.反应温度升高及pH降低都能够提高Pd/SnO2的选择性.甲酸-Pd/SnO2催化还原硝酸盐体系中还原反应的调控策略为:反应温度宜控制在40～50℃内,这样可同时获得较高的催化活性和选择性,温度过高对催化活性和选择性影响很小,温度过低则会同时降低催化活性和选择性;控制pH为3时,可以获得最大的催化活性及较好的选择性,pH升高会降低Pd/SnO2的催化活性和选择性,pH降低会导致催化活性迅速降低,但对选择性影响不大;甲酸与硝酸盐的物质的量比宜大于4:1,此时可以有效地抑制pH的上升,同时获得较高的催化活性和选择性,甲酸与硝酸盐的物质的量比小于4:1时,会同时降低Pd/SnO2的催化活性和选择性.     

A comparative investigation of NdSrCu_(1-x) Co_x O_(4-δ) and Sm_(1.8) Ce_(0.2) Cu_(1-x) Co_x O_(4-δ) (x:0–0.4) for NO decomposition

A series of single-phase T-structured NdSrCu 1-x Co x O 4-δ with oxygen vacancies and T -structured Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ (x: 0–0.4) with oxygen excess were prepared using ultrasound-assisted citric acid complexing method, and characterized by means of techniques such as thermogravimetric analysis and NO temperature-programmed desorption (NO-TPD). The catalytic activities of these materials were evaluated for the decomposition of NO. It was found that the NdSrCu 1-x Co x O 4-δ catalysts were of oxygen vacancies whereas the Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ ones possessed excessive oxygen (i.e., over-stoichiometric oxygen); with a rise in Co doping level, the oxygen vacancy density of NdSrCu 1-x Co x O 4-δ decreased while the over-stoichiometric oxygen amount of Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ increased. The NO-TPD results revealed that NO could be activated much easier over the oxygen-deficient perovskite-like oxides than over the oxygen-excessive perovskite-like oxides, with the NdSrCuO 3.702 catalyst showing the best efficiency in activating NO molecules. Under the conditions of 1.0% NO/helium, 2800 hr -1 , and 600–900°C, the catalytic activity of NO decomposition followed the order of NdSrCuO 3.702 NdSrCu 0.8 Co 0.2 O 3.736 NdSrCu 0.6 Co 0.4 O 3.789 Sm 1.8 Ce 0.2 Cu 0.6 Co 0.4 O 4.187 Sm 1.8 Ce 0.2 Cu 0.8 Co 0.2 O 4.104 Sm 1.8 Ce 0.2 CuO 4.045 , in concord with the sequence of decreasing oxygen vacancy or oxygen excess density. Based on the results, we concluded that the higher oxygen vacancy density and the stronger Cu 3+ /Cu 2+ redox ability of NdSrCu 1-x Co x O 4-δ account for the easier activation of NO and consequently improve the catalytic activity of NO decomposition over the catalysts.     

Catalytic performance of Fe3O4-CoO/Al2O3 catalyst in ozonation of 2-(2,4-dichlorophenoxy)propionic acid, nitrobenzene and oxalic acid in water

Fe3O4-CoO/Al2O3 catalyst was prepared by incipient wetness impregnation using Fe(NO3) 3·9H2O and Co(NO3) 2·6H2O as the precursors,and its catalytic performance was investigated in ozonation of 2-(2,4-dichlorophenoxy) propionic acid(2,4-DP) ,nitrobenzene and oxalic acid.The experimental results indicated that Fe3O4-CoO/Al2O3 catalyst enabled an interesting improvement of ozonation eciency during the degradation of each organic pollutant,and the Fe3O4-CoO/Al2O3 catalytic ozonation system followed a radical-type mechanism.The kinetics of ozonation alone and Fe3O4-CoO/Al2O3 catalytic ozonation of three organic pollutants in aqueous solution were discussed under the mere consideration of direct ozone reaction and OH radical reaction to well investigate its performance.In the catalytic ozonation of 2,4-DP,the apparent reaction rate constants(k) were determined to be 1.456×10-2 min-1 for ozonation alone and 4.740×10-2 min-1 for O3/Fe3O4-CoO/Al2O3.And O3/Fe3O4-CoO/Al2O3 had a larger Rct(6.614×10-9) calculated by the relative method than O3 did(1.800×10-9) ,showing O3/Fe3O4-CoO/Al2O3 generated more hydroxyl radical.Similar results were also obtained in the catalytic ozonation of nitrobenzene and oxalic acid.The above results demonstrated that the catalytic performance of Fe3O4-CoO/Al2O3 in ozonation of studied organic substance was universal to a certain degree.     

Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3

The catalysts of iron-doped Mn-Ce/TiO 2(Fe-Mn-Ce/TiO 2) prepared by sol-gel method were investigated for low temperature selective catalytic reduction(SCR) of NO with NH 3.It was found that the NO conversion over Fe-Mn-Ce/TiO 2 was obviously improved after iron doping compared with that over Mn-Ce/TiO 2.Fe-Mn-Ce/TiO 2 with the molar ratio of Fe/Ti = 0.1 exhibited the highest activity.The results showed that 96.8% NO conversion was obtained over Fe(0.1)-Mn-Ce/TiO 2 at 180°C at a space velocity of 50,000 hr 1.Fe-Mn-Ce/TiO 2 exhibited much higher resistance to H 2 O and SO 2 than that of Mn-Ce/TiO 2.The properties of the catalysts were characterized using X-ray diffraction(XRD),N 2 adsorption,temperature programmed desorption(NH 3-TPD and NOx-TPD),and Xray photoelectron spectroscopy(XPS) techniques.BET,NH3-TPD and NOx-TPD results showed that the specific surface area and NH3 and NOx adsorption capacity of the catalysts increased with iron doping.It was known from XPS analysis that iron valence state on the surface of the catalysts were in Fe3+ state.The doping of iron enhanced the dispersion and oxidation state of Mn and Ce on the surface of the catalysts.The oxygen concentrations on the surface of the catalysts were found to increase after iron doping.Fe-Mn-Ce/TiO2 represented a promising catalyst for low temperature SCR of NO with NH3 in the presence of H2 O and SO2.