The TNO multi-energy method combined to mathematical programming and computational fluid dynamics for optimisation of gas detectors

Gas leakage is a matter of concern for several industries such as oil and gas, mining, food, and healthcare. When the industry considers gas detectors, the main questions are: How many gas detectors are required? Where is the best location to install them? To answer these questions Computational Fluid Dynamics (CFD) simulations and optimisation procedures are employed to calculate the plume location and plume volume to better position the gas detectors. We investigated how the optimisation cell size for the set covering problem can be calculated based on a given explosion overpressure threshold. Resorted by the multi-energy explosion model, we calculate the flammable cloud volume associated with a pre-defined overpressure value. The cloud volume is applied in the solution of the set covering problem and an optimal set for the gas detectors is obtained. The final gas detector network (number and location of the devices) is validated against CFD simulations for small releases. The results provide evidence that the optimal gas detector networks is able to detect gas leaks within a feasible time.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

水生态环境质量评价方法及在黄河流域的应用进展

开展水生态环境质量评价方法研究,建立合适的河流健康评价体系是解决河流健康问题的前提和实现河流健康管理的重要手段。黄河自上而下生态环境现状迥异,水生态环境脆弱,寻求一种或多种适合黄河流域水生态环境质量的评价方法具有重要意义。该文介绍了国内外水生态环境质量评价方法及在黄河流域的应用进展,总结了鱼类生物完整性指数(F-IBI)、底栖无脊椎动物完整指数(B-IBI)、着生藻类生物完整性指数(P-IBI)及水生态环境质量综合评价法的主要指标,以及黄河流域不同区域生物种类的评价指标,分析了各评价方法优缺点及应用范围,并根据目前研究基础评述了黄河流域水生态环境质量评价存在的问题,对黄河流域水生态环境质量评价方法、指示生物的选择及水生态环境质量综合评价法的研究等提出了具体建议。     

一种城市生态系统健康评价方法及其应用

将健康概念引入城市生态系统研究,从复合生态系统角度评价和辨析城市生态环境问题,为生态城市建设提供决策依据极具现实意义．基于城市复合生态系统健康内涵,提出用距离指数和协调指数表征系统发展水平和协调状况,构建整合距离指数和协调指数的城市生态系统健康评价模型,并设定了城市生态系统健康状态的评价标准,建立城市生态系统健康评价指标体系．对宁波的实例分析揭示了宁波城市生态系统健康特征和地域空间分布,表明模型能够很好地辨识城市生态系统的复合特征和地域空间特征,指示城市生态规划和建设的重点行动领域,为城市实施可持续发展战略提供决策依据．     

水生生物对三唑磷的物种敏感度分布研究

针对水环境中日益严重的有机磷农药污染问题,选择广泛使用的三唑磷作为研究对象,利用其对水生生态系统中不同营养层次生物物种的半数效应浓度(median effective concentration, EC₅₀),建立了基于对数-逻辑斯蒂分布的水生生物物种敏感度分布(species sensitivity distribution, SSD)模型,并采用概率图和吻合度检验方法对该模型进行了检验和评价.结果表明,水生生物对三唑磷的 SSD 服从对数-逻辑斯蒂分布,其参数为 α=-0.4788±0.2381,β=0.7546±0.1078.基于该 SSD 模型,获得三唑磷的 5% 危害浓度(hazardous concentration for 5% of the species, HC₅)值为 1.992×10^-3 mg/L,并推导出三唑磷的最大浓度基准值(criteria maximum concentration, CMC)值为 9.96×10^-4 mg/L.对 HC₅、CMC 与单一物种的安全浓度的比较研究指出,基于 SSD 方法制定环境质量标准更为严格,也更接近于真实的生态环境.另外,根据渤海莱州湾海域中三唑磷的监测数据,预测了其对物种的潜在影响比例(potentially affected fraction, PAF)为 0.36%,对该水域生态环境的影响处于较低风险水平.     

冬小麦生产力估算方法研究

本文在综述前人工作的基础上,对作物生产力的概念重新进行了阐述,提出作物生产力包括多层次的含义、各层次生产力代表不同的生产水平且限制因子不同,并对各层次生产力进行了定义。从大气-作物-土壤系统出发,探讨了冬小麦的生长发育及产量形成与各环境因子、能量投入之间的定量关系,采用动态模拟和统计分析相结合的方法,利用dBASEⅢ和BASIC语言,建立起了冬小麦生长发育及生产力形成的动态模拟软件,该软件可以根据不同需要对不同地区的冬小麦干物质累积、叶面积变化及土壤水分平衡进行计算,并可计算各层次的生产力。     

城市地区重建湿地的生态过程研究

研究了湿地重建过程中植物、土壤和水质的动态变化特征.湿地重建2 a后植物种类增加了11种,芦苇、菖蒲和香蒲3种植物的高度、生物量在第2个生长季明显高于第1个生长季节,植物生物量分别增加到原来的13、1.5和1.4倍.湿地种植区土壤有机质总体上是降低的,土壤全氮含量从1?500　mg/kg降低到850　mg/kg（p＜0.01）,土壤全磷在试验期间略有增加.对重建湿地12种水质指标分析表明,夏季湿地出口源水溶解氧高于进口源水,出口源水总氮、叶绿素a、藻类计数3种水质指标均低于进口源水,说明重建湿地水质在夏季出口源水优于进口源水,水质得到改善.研究表明,湿地植物群落重建成功,生物多样性增加,重建湿地在改善和保持源水水质方面发挥了一定的作用.     

复杂火工系统可靠性预计方法及软件研究

目的 解决在进行复杂系统的可靠性建模以及预计时,计算效率低、容易出错的问题。方法 开展基于GO(Goal Oriented)法的复杂火工系统可靠性预计方法研究。建立不同种类火工组件的可靠性模型和算法,结合火工系统的GO图模型,对系统的可靠性进行预计以及定量分析。依据建立的可靠性模型以及算法,开发一套火工系统可靠性建模以及预计的软件,运用该软件对典型座椅弹射火工系统的可靠性进行预计,并且将软件计算结果与蒙特卡洛仿真方法得到的结果进行比较。结果 软件计算结果与蒙特卡洛仿真方法所得结果的最大相对误差不超过0.004 8%。结论 基于GO法的复杂火工系统可靠性预计方法是合理可行的,而且运用GO法开发的软件可以提高可靠性预计的计算效率,同时也为后续的 GO 图分析计算提供了技术支持。     

锌冶炼区耕地土壤和农作物重金属污染状况及风险评价

对贵州省某典型锌冶炼区耕地土壤和主要谷类农作物(稻米、玉米和小麦)进行取样调查,测定了土壤和谷类农作物中重金属Pb、Cd、Zn和Cu的含量,采用单因子污染指数和综合污染指数法评价了土壤和作物籽粒中重金属的污染状况,并分别采用潜在生态风险指数(RI)和危险商(HQ)法评价了土壤重金属污染的潜在生态风险程度和作物中重金属对成人和儿童的健康风险.结果表明:(1)冶炼区耕地土壤受到了重金属不同程度的污染,污染程度排序:玉米地水稻田小麦地,且CdCuZnPb,内梅罗综合污染指数分析结果表明,玉米地污染程度为重污染,水稻田和小麦地为轻污染,且均以Cd对综合指数的贡献最大;(2)土壤Cd存在极强生态风险,4种重金属潜在生态危害大小顺序为:CdPbCuZn;生态风险指数(RI)研究结果表明,研究区处于轻微、中等、强的和很强的生态风险程度的采样点比例分别为1.41%、21.1%、35.2%和42.3%.(3)冶炼区农作物稻米中重金属Pb、Cd、Zn、Cu的平均含量分别为0.145、0.017、16.97和2.704 mg·kg~(-1);玉米中重金属Pb、Cd、Zn、Cu的平均含量分别为0.094、0.055、26.81和4.464 mg·kg~(-1);小麦中重金属Pb、Cd、Zn、Cu的平均含量分别为0.048、0.085、35.37和5.426 mg·kg~(-1).(4)研究区稻米、玉米和小麦均存在重金属超标现象,重金属污染程度为小麦最重,稻米和玉米的污染程度相当,稻米和玉米污染等级均为安全,小麦处于警戒线.(5)各重金属元素每日摄入量均低于美国环保署的参考暴露剂量,安全性较好,但食用该区域谷类农作物引起复合重金属污染对成人和儿童均存在健康风险.(6)耕地土壤重金属含量与谷类农作物可食部分重金属含量间无明显相关性.     

Empirical Trials of Plant Field Guides

We designed 3 image‐based field guides to tropical forest plant species in Ghana, Grenada, and Cameroon and tested them with 1095 local residents and 20 botanists in the United Kingdom. We compared users’ identification accuracy with different image formats, including drawings, specimen photos, living plant photos, and paintings. We compared users’ accuracy with the guides to their accuracy with only their prior knowledge of the flora. We asked respondents to score each format for usability, beauty, and how much they would pay for it. Prior knowledge of plant names was generally low (<22%). With a few exceptions, identification accuracy did not differ significantly among image formats. In Cameroon, users identifying sterile Cola species achieved 46–56% accuracy across formats; identification was most accurate with living plant photos. Botanists in the United Kingdom accurately identified 82–93% of the same Cameroonian species; identification was most accurate with specimens. In Grenada, users accurately identified 74–82% of plants; drawings yielded significantly less accurate identifications than paintings and photos of living plants. In Ghana, users accurately identified 85% of plants. Digital color photos of living plants ranked high for beauty, usability, and what users would pay. Black and white drawings ranked low. Our results show the potential and limitations of the use of field guides and nonspecialists to identify plants, for example, in conservation applications. We recommend authors of plant field guides use the cheapest or easiest illustration format because image type had limited bearing on accuracy; match the type of illustration to the most likely use of the guide for slight improvements in accuracy; avoid black and white formats unless the audience is experienced at interpreting illustrations or keeping costs low is imperative; discourage false‐positive identifications, which were common; and encourage users to ask an expert or use a herbarium for groups that are difficult to identify. Pruebas Empíricas de Guías de Campo de Plantas Hawthorne, Cable & Marshall