生物燃气制气供气装置选型计算

根据生物质热解及其干燥所需能量计算,选择一种生物质燃气制气供气装置作为生物燃油生产过程中用于生物质干燥和热载体加热的能量来源,对降低生物燃油规模化生产能耗和生产成本具有重要的研究实践价值和经济意义.     

最小点火能的影响因素及计算误差分析研究

对可燃气体 (液体蒸气 )、可燃粉尘的最小点火能测试中的影响因素进行了分析总结 ,并结合实验分析了求得最小点火能精确值所需要的环境条件和设备设施条件———敏感条件 ;分析了敏感条件下运用常规测试方法和常规计算公式中存在较大误差的原因 ,进而提出了相对准确合理的测试方法及计算公式———直接积分法及拟合近似积分法 ,从而大大降低了误差度 ,获得了比较符合实际的数据。     

Application of tracer ratio and inverse dispersion methods with boat-based plume measurements to estimate ammonia emissions from seabird colonies

Ammonia emissions from two contrasting seabird colonies in Scotland were measured, based on the determination of atmospheric concentrations downwind of the colonies. Atmospheric concentrations of ammonia (NH₃) across the downwind plume were compared with the inverse application of a Gaussian dispersion model (ID) to calculate the modelled NH₃ emission that would generate the measured cross-wind-integrated plume concentration. In parallel, a tracer gas (sulphur hexafluoride, SF₆) was released from the colonies with air samples taken to allow determination of SF₆ concentrations. On the basis of the known emission rate of SF₆, the magnitude of ammonia emissions was estimated by the cross-wind-integrated tracer ratio (TR) of NH₃/SF₆ concentrations. Coupled with data on annual bird attendance, the measurements indicate annual emissions from the Isle of May and the Bass Rock of 18 and 132 tonnes NH₃-N year^–1, respectively. The measured NH₃ emissions were compared with estimates of seabird nitrogen excretion to estimate the proportion of excreted N that is volatilised as NH₃ (F_Nr). The emission estimates of the two methods compared favourably, giving 4 and 6 kg NH₃-N h^–1 (F_Nr = 15%) for the Isle of May for the ID and TR methods, respectively, and 21 and 25 kg NH₃-N h^–1 (F_Nr = 50%) for the Bass Rock for the ID and TR methods, respectively. The results provide the first measurement-based estimates to allow regional up scaling of ammonia emissions from seabirds.     

近断层地震动考虑能量损伤效应的非弹性强度需求

由于靠近断层处地震地面运动中速度脉冲作用的存在,导致传统的基于瞬时加速度反应谱的抗震设计,不能有效考虑由此带来的巨大能量耗散和位移需求。笔者采用代表性的脉冲型实际近场地震记录和人工模拟三角函数地震动时程,在分析累积输入地震动耗能和结构位移间关系基础上,提出了等效速度比的表达式;给出了近场地震动的等效变形需求表达式;提出了等价延性系数的概念,来考虑由于地震动能量耗散对结构的强度需求;经非线性时程分析方法对其稳定性进行了验证比较,有利于增强结构的安全性。     

能源安全工程研究体系探讨

随着矿物能源开采消耗量的急剧增加,煤炭开采安全、能源开采和消耗引起的生态环境改变及破坏、世界石油市场油价波动对经济增长的不利影响、水电等可再生能源所占比重较低等,构成了制约可持续发展的能源安全问题。能源安全工程研究体系由区域能源开发消费安全、合理能源结构和消费布局、能源安全战略及相关法律法规等研究内容组成。通过分层次研究和循环促进,开展能源安全战略、能源安全技术、能源生态关系、能源安全经济的系统研究,为科学解决能源安全问题、实现国家或区域社会经济的可持续发展,提供了理论支持和科技保障。     

关于我国能源安全稳定供应的思考

简要介绍了中国的能源供求现状,指出中国能源的两大特征:①煤炭消费为主;②人均消费低、能源利用率低。笔者强调,中国能源对外依存增大,已成为能源输入国;提出逐步调整以煤为主的能源结构,实现能源替代,构建优质化、多元化的能源结构的策略;着重从5个方面进行调整———重点解决石油供不应求的能源结构性矛盾、加强煤炭资源的清洁和优质开发利用、发展以利用洁净煤技术为基础的电力工业、提高核电的比例、加强新能源和可再生能源的开发利用,确保我国能源的安全稳定供应和可持续发展。     

A concept for simultaneous wasteland reclamation, fuel production, and socio-economic development in degraded areas in India: Need, potential and perspectives of Jatropha plantations

The concept of substituting bio‐diesel produced from plantations on eroded soils for conventional diesel fuel has gained wide‐spread attention in India. In recent months, the Indian central Government as well as some state governments have expressed their support for bringing marginal lands, which cannot be used for food production, under cultivation for this purpose. Jatropha curcas is a well established plant in India. It produces oil‐rich seeds, is known to thrive on eroded lands, and to require only limited amounts of water, nutrients and capital inputs. This plant offers the option both to cultivate wastelands and to produce vegetable oil suitable for conversion to bio‐diesel. More versatile than hydrogen and new propulsion systems such as fuel cell technology, bio‐diesel can be used in today's vehicle fleets worldwide and may also offer a viable path to sustainable transportation, i.e., lower greenhouse gas emissions and enhanced mobility, even in remote areas. Mitigation of global warming and the creation of new regional employment opportunities can be important cornerstones of any forward looking transportation system for emerging economies.     

Indicators for sustainable energy development in Lithuania

This article summarizes some of the results from the application of the indicators for sustainable energy development (ISED) tool for analyzing Lithuania's energy sector, in terms of trends, setting energy policy goals and monitoring progress towards these goals. This experience illustrates the potential applicability of the ISED methodology for energy policy development in economies in transition, using Lithuania as an example. The article presents a summary of the results achieved and conclusions arrived at from the analysis of six priority areas in the context of the research project coordinated by the International Atomic Energy Agency, and provides recommendations for the development of sustainable energy policy using the ISED approach.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Societal implications of sustainable energy action plans: from energy modelling to stakeholder learning

This article investigates the potential impact of sustainable energy action plans (SEAPs) on local development through a two-step methodology involving participatory planning and quantitative analysis. The first phase relies on a participatory system mapping (PSM) approach and generates a causal structure at the basis of the urban model. In the second phase, we transform the qualitative map into a system dynamic model which evaluates the effect of the SEAP on social, economic and environmental indicators. This methodology was applied to the case of Cascina Municipality (Italy). Through scenario analysis, we show that some indirect feedback can harm the achievement of the 20% emission reduction target. This process allows the local authority and stakeholders to evaluate the impact of emission reduction policies on CO₂ emissions and local development, thereby generating collective learning on the systemic implications of the plan. We show that this method can enhance the ambition of emission mitigation efforts by small towns.