ASM1改进模型简介及应用

Twostepmantis模型是在ASM1模型基础上发展而成,它可对碳氧化、传统硝化反硝化、同时硝化反硝化过程、好氧反硝化进行模拟。应用Twostepmantis模型,对一序批式活性污泥法(SBR)实验进行模拟预测,结果表明,模型确实可以很有效解释大部分实验数据。     

起重机结构疲劳剩余寿命评估方法研究

针对机械结构的主要破坏形式——疲劳破坏,以桥式起重机焊接箱形主梁为研究对象,根据断裂力学Paris-Erdogan方程,结合Miner疲劳损伤累积理论,应用实验所得数据,推导出疲劳剩余寿命公式。采集不同类型,不同额定起重量起重机一段时间内相应起重量的工作次数数据,以模拟出危险点处相应的载荷谱。以VC++为开发平台,研制完成桥式起重机疲劳剩余寿命评估软件。该软件可模拟实现普通、铸造桥式起重机的疲劳剩余寿命估算,并与实验结果进行比较,表明具有较高的吻合性和实用性。     

Approaches to Evaluate Water Quality Model Parameter Uncertainty for Adaptive TMDL Implementation1

Abstract: The National Research Council recommended Adaptive Total Maximum Daily Load implementation with the recognition that the predictive uncertainty of water quality models can be high. Quantifying predictive uncertainty provides important information for model selection and decision‐making. We review five methods that have been used with water quality models to evaluate model parameter and predictive uncertainty. These methods (1) Regionalized Sensitivity Analysis, (2) Generalized Likelihood Uncertainty Estimation, (3) Bayesian Monte Carlo, (4) Importance Sampling, and (5) Markov Chain Monte Carlo (MCMC) are based on similar concepts; their development over time was facilitated by the increasing availability of fast, cheap computers. Using a Streeter‐Phelps model as an example we show that, applied consistently, these methods give compatible results. Thus, all of these methods can, in principle, provide useful sets of parameter values that can be used to evaluate model predictive uncertainty, though, in practice, some are quickly limited by the “curse of dimensionality” or may have difficulty evaluating irregularly shaped parameter spaces. Adaptive implementation invites model updating, as new data become available reflecting water‐body responses to pollutant load reductions, and a Bayesian approach using MCMC is particularly handy for that task.     

SIMULTANEOUS EQUATION SYSTEMS: A CONSISTENT ESTIMATOR FOR UNKNOWN PARAMETERS IN CONFINED AQUIFERS1

ABSTRACT: This paper presents criteria for establishing the identification status of the inverse problem for confined aquifer flow. Three linear estimation methods (ordinary least squares, two-stage least squares, and three-stage least squares) and one nonlinear method (maximum likelihood) are used to estimate the matrices of parameters embedded in the partial differential equation characterizing confined flow. Computational experience indicates several advantages of maximum likelihood over the linear methods.     

PARAMETER ESTIMATION FOR TPLN DISTRIBUTION FOR FLOOD FREQUENCY ANALYSIS1

ABSTRACT: The principle of maximum entropy (POME) was used to derive an alternative method for parameter estimation for the three parameter lognormal (TPLN) distribution. Six sets of annual peak discharge data were used to evaluate this method and compare it with the methods of moments and maximum likelihood estimation.     

CONTEMPORANEOUS AUTOREGRESSIVE-MOVING AVERAGE (CARMA) MODELING IN WATER RESOURCES1

ABSTRACT: The Contemporaneous Autoregressive-Moving Average (CARMA) model is a simple and efficient model that can be used to fit many multivariate hydrological time series. For certain types of multistation river flow systems, the CARMA model is naturally obtained when the physical restrictions of the system or the characteristics of the data are taken in consideration during the formulation of the model. It is shown how the CARMA model can optimally be used to handle multiple time series where the number of observations in each series may be different. Adequate model building techniques, as well as computational and statistical efficient algorithms to estimate the parameters of the model, are given. The methodologies and applications of the CARMA model are illustrated with three examples. It is also shown how the full multivariate ARMA model may lead to losses in efficient of the estimators when the CARMA model is adequate.     

SUPPLEMENTATION OF MISSING VALUES IN WATER QUALITY DATA1

ABSTRACT The problem of estimating missing values in water quality data using linear interpolation and harmonic analysis is studied to see which one of these two methods yields better estimates for the missing values. The data used in this study consisted of midnight values of dissolved oxygen from the Ohio River collected over a period of one year at Stratton station. Various hypothetical cases of missing data are considered and the two methods of supplementing missing values are evaluated using statistical tests. The results indicate that when the percentage of missed data points exceeded ten percent of the total number in the original sample, harmonic analysis usually yielded better estimates for both the regularly and irregularly missed cases. For data that exhibit cyclic variation, examples of which are dissolved oxygen concentration and water temperature, harmonic analysis as a data generation technique appears to be superior to linear interpolation.     

A PRECIPITATION ESTIMATION TECHNIQUE FOR DEVELOPING ISOHYETS IN AN ARID AREA USING VEGETATION AND TOPOGRAPHIC PARAMETERS1

A technique is presented for developing an isohyet map for the Hualapai Valley, a closed hydrologic basin of about 315 square miles in the northwestern Great Basin in Nevada. In this basin there is practically no climatic data, and in the northwest Great Basin there are too few stations for determination of rainfall on a detailed basis. Using a vegetational typing to represent a range in elevation and precipitation, an initial mean annual rainfall is determined for selected points on a grid pattern. This rainfall is then modified by using topographic parameters of slope, orientation, exposure, and rainfall shadow effect. The resulting point determinations of mean annual rainfall are then smoothed using a trend surface analysis, and an isohyetal map is drawn from the smoothed points. The technique provides an estimated accuracy of one inch of mean annual precipitation and one mile of resolution on isohyets.     

LEGAL CHALLENGE OF THE UNGAGED WATERSHED1

The lack of uniform techniques for estimating design discharges in ungaged areas is a source of growing concern in the courts now faced with challenges to floodplain boundaries and culvert design for highway crossings. This paper summarizes a court case in which calculations of the design discharge and the hydraulic backwater effects of a major highway culvert were contested by the plaintiff. Emphasis in the paper is placed on the variation in computed flows and the interpretation of the court in the face of diverse hydrologic methods for the ungaged watershed. The results of a preliminary evaluation of ungaged watershed methods applicable to Pennsylvania are also reported in terms of standard error and bias.     

ANALYZING URBANIZATION IMPACTS ON PENNSYLVANIA FLOOD PEAKS1

ABSTRACT: The impact of man made change on the hydrology of developing watersheds is frequently measured in terms of the ratio: flood peak after development to flood peak before development over a range of return periods. However, the analysis of urbanization effects on flood frequency presents a vexing problem because of a general lack of flood data in urban areas and also because of nonstationarity in the development process. Clearly, the flood peak ratio depends on the impervious fraction and percent of basin sewered and these factors have been taken into account in recent urban flood peak models. In genral, these models are developed either by: (1) split sample analysis of available annual flood data, or (2) by computer simulation using mathematical watershed models capable of representing man made changes. The present paper discusses the results of work in progress to characterize the impact of urbanization on small developing watersheds in Pennsylvania.