断裂构造对斜坡应力场影响的数值模拟及成灾机理研究

断裂构造及活动强度对斜坡体的应力场分布具有重要的影响。采用基于强度折减法的有限元法,分别以正断层和逆断层与斜坡体的组合关系为例,剖析了断裂构造对斜坡体应力场的影响及成灾机理,揭示了含有断层的斜坡体塑性区的贯通过程。研究表明,包含断层的斜坡体在应力分布特征及斜坡变形破坏机理方面与无断层的斜坡体有较大差别:含断层的斜坡体在坡面和断层面附近的最大主应力迹线与坡面或断层面相平行,在天然状态下,塑性区同时出现在坡脚和断层面后方,随着折减系数的增大,塑性区分别从坡脚和断层面后方向坡体深部和上部发展,直至断层面前后两个塑性区相贯通,坡体发生破坏,并且对坡体变形破坏的影响程度以逆断层最强,其次为正断层,断层不活动时较弱。     

陆缘伸展区的地震激发机制

江苏所处的中国东部被当代横贯欧亚的北西西向环球螺旋形扭转断裂带（其东段即大别—舟山断裂）分割为南部的褶皱山带隆升区和北部的沉降区。软流圈从太平洋方向面楔入北部区，使该区岩石圈减薄，陆壳向海洋伸展、离裂，产生郯庐断裂等具有直扭性质的近南北向软流（及地幔）底辟，并伴随有多层水平拆离面，所见为高导低速的水平破裂带。绝大多数地震沿着其中埋深１５ｋｍ（±５ｋｍ）的第一水平破裂带发生，使北部区成面积性地震区。结合高压物性实验所得的岩石微破裂规律（…分割—错位—嵌合—再分割…）判断得知，水平破裂带中的膨胀增厚部分的流体处在超压状态而成为储能体，在陆壳伸展运动中会突然释放能量而诱发地震。因此，根据已有实际分析认为：强震和频震区的发展的必要条件是软流楔入和陆壳伸展，而其充分条件是储能体在软流冲击和增温效应下的爆裂或突然塌缩事件。据此可根据软流运动和岩石圈结构预测未来震中，建立中、长期预报甚至短临预报的监控系统     

The centers of gravity and dynamic types of body shape of terrestrial invertebrates

In the framework of dynamic morphology theory, the centers of gravity and geometric centers of projections have been determined for the bodies of more than 182 forms of invertebrates, and these data have been used to distinguish four types of dynamic body shapes. It has been demonstrated that specific dynamic types of body shape are characteristic of individual taxa. In addition, there are a group of “transformers,” which may assume any dynamic type of shape, and a group of invertebrates with one predominant dynamic type.     

Development of a Computationally Efficient Full Human Body Finite Element Model

Introduction: A simplified and computationally efficient human body finite element model is presented. The model complements the Global Human Body Models Consortium (GHBMC) detailed 50th percentile occupant (M50-O) by providing kinematic and kinetic data with a significantly reduced run time using the same body habitus.

Methods: The simplified occupant model (M50-OS) was developed using the same source geometry as the M50-O. Though some meshed components were preserved, the total element count was reduced by remeshing, homogenizing, or in some cases omitting structures that are explicitly contained in the M50-O. Bones are included as rigid bodies, with the exception of the ribs, which are deformable but were remeshed to a coarser element density than the M50-O. Material models for all deformable components were drawn from the biomechanics literature. Kinematic joints were implemented at major articulations (shoulder, elbow, wrist, hip, knee, and ankle) with moment vs. angle relationships from the literature included for the knee and ankle. The brain of the detailed model was inserted within the skull of the simplified model, and kinematics and strain patterns are compared.

Results: The M50-OS model has 11 contacts and 354,000 elements; in contrast, the M50-O model has 447 contacts and 2.2 million elements. The model can be repositioned without requiring simulation. Thirteen validation and robustness simulations were completed. This included denuded rib compression at 7 discrete sites, 5 rigid body impacts, and one sled simulation. Denuded tests showed a good match to the experimental data of force vs. deflection slopes. The frontal rigid chest impact simulation produced a peak force and deflection within the corridor of 4.63 kN and 31.2%, respectively. Similar results vs. experimental data (peak forces of 5.19 and 8.71 kN) were found for an abdominal bar impact and lateral sled test, respectively. A lateral plate impact at 12 m/s exhibited a peak of roughly 20 kN (due to stiff foam used around the shoulder) but a more biofidelic response immediately afterward, plateauing at 9 kN at 12 ms. Results from a frontal sled simulation showed that reaction forces and kinematic trends matched experimental results well. The robustness test demonstrated that peak femur loads were nearly identical to the M50-O model. Use of the detailed model brain within the simplified model demonstrated a paradigm for using the M50-OS to leverage aspects of the M50-O. Strain patterns for the 2 models showed consistent patterns but greater strains in the detailed model, with deviations thought to be the result of slightly different kinematics between models. The M50-OS with the deformable skull and brain exhibited a run time 4.75 faster than the M50-O on the same hardware.

Conclusions: The simplified GHBMC model is intended to complement rather than replace the detailed M50-O model. It exhibited, on average, a 35-fold reduction in run time for a set of rigid impacts. The model can be used in a modular fashion with the M50-O and more broadly can be used as a platform for parametric studies or studies focused on specific body regions.     

Assessment of potential dermal and inhalation exposure of workers to the insecticide imidacloprid using whole-body dosimetry in China

In China, although improvements to the pesticide registration process have beenmade in last thirty years, no occupational exposure data are required to obtain a commercial license for a pesticide product. Consequently, notably little research has been conducted to establish an exposure assessment procedure in China. The present study monitored the potential dermal operator exposure from knapsack electric sprayer wheat field application of imidacloprid in Liaocheng City, Shandong Province and in Xinxiang City, Henan Province, China, using whole-body dosimetry. The potential inhalation exposure was determined using a personal air pump and XAD-2 sample tubes. The analytical method was developed and validated, including such performance parameters as limits of detection and quantification, linear range, recovery and precision. The total potential dermal and inhalation exposures were 14.20, 16.80, 15.39 and 20.78 mL/hr, respectively, for the four operators in Liaocheng and Xinxiang, corresponding to 0.02% to 0.03% of the applied volume of spray solution. In all trials, the lower part (thigh, lower leg) of the body was the most contaminated, accounting for approximately 76% to 88% of the total exposure. The inhalation exposure was less than 1% of the total exposure. Such factors as the application pattern, crop type, spray equipment, operator experience and climatic conditions have been used to explain the exposure distribution over the different parts of the body. As indicated by the calculated Margin of Exposure, the typical wheat treatment scenarios when a backpack sprayer was used are considered to be safe in terms of imidacloprid exposure.     

Physiologically based pharmacokinetic modeling of perfluoroalkyl substances in the human body

Currently, there are limited data on the levels of perfluoroalkyl substances other than perfluorooctane sulfonic acid and perfluorooctanoic acid in the human body. Most of this information has been extracted from biological monitoring of plasma while the occurrence of perfluoroalkyl substances in other human tissues is rarely studied. The objective of the present study was to develop a physiologically based pharmacokinetic model to assess the concentration of perfluoroalkyl substances in human tissues, based on an existing model previously validated for perfluorooctane sulfonic acid and perfluorooctanoic acid. Experimental data on concentrations of perfluoroalkyl substances in human tissues from individuals in Tarragona County (Catalonia, Spain) were used to estimate the values of some distribution and elimination parameters needed for the simulation. No significant correlations were found between these parameters and the chain lengths. The model was finally validated for five perfluoroalkyl substances.     

Biodiesel production from vegetable oil and waste animal fats in a pilot plant

In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as catalyst and methanol was used as alcohol in the pretreatment reactions. After reducing the FFA level of the animal fats to less than 1%, the transesterification reaction was completed with alkaline catalyst. Due to low FFA content of corn oil, it was directly subjected to transesterification. Potassium hydroxide was used as catalyst and methanol was used as alcohol for transesterification reactions. The fuel properties of methyl esters produced in the biodiesel pilot plant were characterized and compared to EN 14214 and ASTM D6751 biodiesel standards. According to the results, ester yield values of animal fat methyl esters were slightly lower than that of the corn oil methyl ester (COME). The production cost of COME was higher than those of animal fat methyl esters due to being high cost biodiesel feedstock. The fuel properties of produced methyl esters were close to each other. Especially, the sulfur content and cold flow properties of the COME were lower than those of animal fat methyl esters. The measured fuel properties of all produced methyl esters met ASTM D6751 (S500) biodiesel fuel standards.     

The Upper and Lower Ecological Limits of Specific Metabolic Power of Different Organisms

It has been demonstrated that bioenergetic properties of plants (independence of productivity from size, proportionality between radial growth of woody plants and plant mass, etc.) and animals are not related to the presumed universal linear relationship between metabolic power and body mass to the power of 3/4. This relationship is not true for plants and endothermic animals. The observed bioenergetic characteristics of these organisms are explained by simple biological and physical laws, including the existence of the lower and upper limits of the specific metabolic power of living matter.