平行磁场下电极材料对DBD降解亚甲基蓝的影响

采用介质阻挡放电等离子体技术,以镍,铁,钼,不锈钢4种材料作为电极,分别在有平行磁场和无平行磁场的条件下,考察了不同电极材料对亚甲基蓝降解率和能量利用率的影响.实验中发现电极材料的不同会影响亚甲基蓝的降解效果,其中镍电极在处理8min后亚甲基蓝降解率可达99%,降解效果最好,电极材料还会影响平行磁场对亚甲基蓝降解的促进效果,铁和镍电极的能量利用率相比无磁场时提高了约20%,而钼和不锈钢只有5%~10%.通过研究介质阻挡放电等离子体的产生机理和二次电子发射原理,发现这些差异是由电极材料的二次电子发射系数和磁导率的不同导致的,4种材料中铁的二次电子发射系数最大,电子雪崩过程中产生的高能电子更多,因此降解效果最好,铁和镍的磁导率最大,放电空间内的磁感应强度更高,因此平行磁场对亚甲基蓝降解率和能量利用率的提升更大.     

考虑尾矿材料参数空间变异性的尾矿坝稳定可靠度分析

为客观地评价尾矿坝稳定性,在随机场理论和极限平衡分析框架下,采用考虑参数空间变异性尾矿坝可靠度分析的非侵入式随机有限元法,通过Karhunen Loève级数展开方法离散尾矿材料参数（渗透系数、摩擦角等）随机场,利用Hermite随机多项式展开拟合尾矿坝安全系数与输入参数之间的隐式函数关系;再采用拉丁超立方抽样技术产生输入参数样本点求解多项式展开系数;最后,通过应用到一实际尾矿坝工程说明了该方法的有效性。结果表明,该方法可以真实地模拟尾矿材料的空间变异性对尾矿坝稳定性的影响,保证尾矿坝可靠度分析与确定性稳定分析互不耦合,与10 000次直接拉丁超立方抽样方法相比,该方法具有较高的计算精度和效率。     

埋地管道缺陷的自漏磁场计算方法研究

基于现有的埋地管道缺陷自漏磁场计算方法把缺陷处的磁荷假设为均匀分布,对于计算结果与实际检测存在较大误差的问题,通过采用ANSYS软件对管道缺陷进行有限元分析,根据材料力磁关系和磁荷理论,提出1种考虑磁荷实际分布的缺陷自漏磁场计算方法,并将该计算方法应用在某埋地管道磁记忆检测中。研究结果表明:该方法计算结果与实际值之间的峰值相对误差为6.9%,相对于现有方法16.4%的相对误差,准确度更高。研究结果有助于在管道磁记忆检测中,提高管道缺陷量化的准确性,对埋地管道缺陷非开挖识别与剩余寿命评价有重要意义。     

泽龙湖景观水污染治理及生态修复

为了去除泽龙湖微污染景观水中的氮、磷及有机物等污染成分,采用人工增氧和浮田型生态岛技术对泽龙湖景观水进行了生态修复。结果表明,人工增氧能很好地氧化水中有机物,生态岛水生植物可有效地吸收氮和磷,处理后湖水可达到《地面水环境质量标准》(GB 3838—2002)中的Ⅳ类标准。     

基于稳态与非稳态的喷吹管内流场的对比研究

针对等孔径喷吹管,利用CFD软件对其内流场进行数值模拟,得到不同入口流量条件下的流场分布特性。对喷吹管进行非稳态流场模拟,并与稳态模拟结果分析比较,模拟结果误差控制在1%以内,验证了将喷吹管非稳态内流场简化为稳态流场分析具有一定的可行性。沿着喷吹管气流流动方向,喷嘴出口流量分布不均匀,整体有增大的趋势;沿喷吹管轴向气流渐趋均匀,即越靠近端面,喷吹偏心角越小,甚至为0。     

水稻田非点源污染原位试验研究

为了研究野外水稻田的非点源污染,本试验采取一种新的原位观测方法:即在不改变水稻田原有出流特征前提下,在水稻生长季采集田面水水位和降雨信息,通过水位变化曲线计算水稻田每日的蒸散发和渗漏损失量,再根据水量平衡关系计算径流量.观测期间定期采集田面水测定总氮(TN)、总磷(TP)浓度,根据径流量和浓度估算非点源污染流出负荷量.试验选取北京市海淀区上庄镇某村水稻田试验田块,通过1年的试验观测得到在生长季内的37场降雨中共有9场降雨产生了出流.另外,还有2次人工排水和1次农田回归流形成了非点源污染.经计算试验区水稻田每个生长季TN输出系数为8.8 kg·hm-2,TP输出系数为0.47 kg·hm-2.该观测方法针对具有多出水口且最低田埂高度动态变化的野外水稻田的非点源污染观测具有较强的可操作性.     

对县级环境监测站计量认证工作的建议

结合陕西省县级监测站在《计量认证》工作中存在的实际情况,从人员少素质低、实验室硬软件差、机构设置不合理等几个方面,对照新、旧《计量认证》评审准则的区别与要求,有针对性的提出从加强县级监测站自身业务能力建设与学习、新的《检验检测机构资质认定评审准则》的学习、质量体系文件的编写及质量体系的建立、质量体系的试运行、现场评审等五个方面的工作,总结了关于做好《计量认证》工作的一些经验,并提出了好的建议和意见,这为县级环境监测站进一步搞好《计量认证》工作提供了参考和借鉴.     

Integrating Temporal Inequality into Conservation Planning to Improve Practice Design and Efficacy

In contrast to spatial inequality, there are currently no methods for leveraging information on temporal inequality to improve conservation efficacy. The objective of this study was to use Lorenz curves to quantify temporal inequality in surface runoff and tile drainage, identify controls on nutrient loading in these flowpaths, and develop design flows for structural conservation practices. Surface runoff (n = 94 site‐years) and tile drainage (n = 90 site‐years) were monitored on 40 fields in Ohio. Results showed, on average, 80% of nitrate‐nitrogen, soluble reactive phosphorus (P), and total P loads occurred between 7 and 12 days per year in surface runoff and between 32 and 58 days per year in tile drainage. Similar temporal inequality between discharge and load provided evidence that loading was transport‐limited and highlighted the critical role hydrologic connectivity plays in nutrient delivery from tile‐drained fields. Design flow criterion for sizing structural practices based on load reduction goals was developed by combining Lorenz curves and flow duration curves. Comparing temporal inequality between fields and the Maumee River, the largest tributary to the western Lake Erie Basin, revealed challenges associated with achieving watershed load reduction goals with field‐scale conservation. In‐field (i.e., improved nutrient and water management), edge‐of‐field (i.e., structural practices), and instream practices will all be required to meet nutrient reduction goals from tile‐drained watersheds.     

Assessment of Physical Load at Work Sites: A Finnish–German Concept

The aim of this article is to introduce a set of work physiology methods for the assessment of physical load at the work site and to consider (a) their relevance for different types of muscular work, and (b) their feasibility for occupational health and safety practitioners. The results of an ergonomic intervention study for the reduction of workload associated with various manual materials handling tasks were used for the evaluation of the feasibility and sensitivity of the measurements of heart rate, the Edholm and OWAS methods, and the ratings of overall and local perceived exertion. The methods proved feasible, although time consuming, and their sensitivity for the quantification of small changes in physical workload was limited. Despite these shortcomings, these methods can be used by occupational health and safety practitioners when their strategy and data collection techniques are developed further. In conclusion, there are relevant and feasible methods fora reliable work-site assessment of cardiorespiratory and postural load related to the activation of large muscle masses. On the other hand, field methods for the quantification of local static workload and repetitive type of workload with small muscle masses are scarce.     

微直流电场对大肠杆菌生长代谢活性的作用

对大肠杆菌（Escherichia coli,DH5α）培养液在连续培养时分别通入不同强度的直流电场,研究了其在持续直流电刺激下的生长曲线、pH曲线、ATP酶活性、胞内总蛋白含量、细胞膜通透性以及细菌微观形态变化.结果表明,适宜的直流电能够促进大肠杆菌增殖;大肠杆菌的ATP酶活在25 mA电流作用下在对数生长前期、对数...