垃圾焚烧飞灰熔融过程重金属的迁移特性实验

对垃圾焚烧飞灰的熔融处理过程中重金属的迁移特性进行了实验研究.在自行设计的实验台上研究熔融温度、时间、气氛、冷却方式等条件对几种重金属固化特性的影响.结果表明,熔融可以固化大部分重金属,同时飞灰中重金属在熔融过程中的固化特性因种类不同呈现显著差异,Cd、Pb属于易挥发金属,而Ni、Cr和Zn不易挥发;飞灰成分、温度、气氛和冷却方式对各种重金属的影响程度各不相同.     

粉煤灰对水中酸性品红的吸附研究

以粉煤灰为吸附剂,研究了粉煤灰对酸性品红的吸附效果。选取了粒径、投加量、温度、时间、转速、染料浓度6个因素进行单因素实验,研究了各个因素对粉煤灰的影响,研究表明,粉煤灰对酸性品红的吸附效果很好,最高去除率可达99.63%;并且从热力学和动力学两方面对粉煤灰吸附酸性品红的过程进行拟合,结果表明,粉煤灰对酸性品红吸附的热力学过程比较符合模型Langmuir EXT1,动力学过程比较符合准一级吸附动力学方程Box Lucas1。     

两种粉煤灰的烟气脱硫实验

采用粉煤灰(FA)和Ca(OH)2水合制得的高活性吸收剂作为二氧化硫的干法脱硫剂，重点研究了两种粉煤灰(电除尘灰和湿式水膜除尘灰)在同一配比、同一水合温度、同一水合时间下的脱硫效率，结果表明：电除尘灰比湿式水膜除尘灰脱硫效率高，并且电除尘的脱硫效率略微低于活性炭，同时介绍了粉煤灰的脱硫机理。     

粉煤灰资源的农业利用

本文根据粉煤灰农业利用的基础及国内外研究现状，阐述了粉煤灰农业利用现状，包括直接施用于农田、利用粉煤灰生产化肥、贮灰场覆土或不覆土造田和填坑造地等。并对粉煤灰农业利用的前景提出了一些看法。     

城市给水厂给水污泥用于烧制粉煤灰-粘土砖的试验

城市给水厂产生的净水污泥(以下简称给水污泥),已成为治理城市固体废弃物污染的紧迫任务,以给水污泥为研究对象,进行了含水率60％-80％的给水污泥-粉煤灰-粘土烧制砖的成型、性能检测等试验研究。结果表明：在给水污泥-粉煤灰-粘土砖中掺人30％-45％(体积比)给水污泥,烧制成品符合国家标准(GB／T 5101-98)要求。     

Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.     

不同活化条件下粉煤灰中锂的酸碱溶出特性

粉煤灰提取氧化铝作为其资源高值利用的重要途径之一引起广泛关注.由于粉煤灰中还含有一定丰度Li（锂）元素,在提取氧化铝的同时实现Li的协同提取对于进一步提高粉煤灰的资源利用效益意义重大.为认识粉煤灰中Li的溶出特性,分别考察了原粉煤灰、CaO煅烧活化粉煤灰和Na₂CO₃煅烧活化粉煤灰中Li在酸性溶液和碱性溶液中的溶出特性,并采用XRD（X-射线衍射）分析了粉煤灰浸取前后的物相变化,结合Li溶出率的变化,阐释了Li在不同浸出条件下溶出率差异的原因.结果表明:在相同浸出温度（100℃）下粉煤灰直接在酸性溶液和碱性溶液中的溶出率相对较低,分别仅为28%和36%;而经CaO和Na₂CO₃活化后粉煤灰中Li的溶出率显著提高,活化后粉煤灰中Li在酸性溶液中的溶出率可达到98%和86%,均高于碱性溶液中Li的溶出率（86%和67%）.XRD的分析结果进一步表明,部分Li可能赋存于非晶相或晶相表面,这部分Li易于被酸或碱直接浸出;部分Li可能镶嵌在莫来石、石英等晶相内部,不易被溶出,经CaO和Na₂CO₃助剂活化后,部分Li又重新嵌入到钙黄长石、霞石等新生成物相的晶格中,而这些物相更易于与酸反应,因而酸性溶液中Li的溶出率普遍高于碱性溶液中的结果.      

钢铁行业不同物料的二英生成分布及机理探讨

钢铁行业是我国二噁英的第一大排放源,但对不同钢铁生产过程二英的生成排放认识有所欠缺.本文系统探究了钢铁行业不同物料的二噁英生成能力和同系物分布特征.结果表明,烧结飞灰的二英生成能力最强,而烧结生料生成二噁英能力最弱.3种污泥(连铸、热轧、冷轧)和烧结生料的二英生成途径相似,4种飞灰(电炉、转炉、高炉一次、高炉二次)之间也有相似的二英生成途径,而烧结飞灰则与其他物料均不同.所有物料中,有毒2,3,7,8-PCDD同系物之间存在极强的相关性,且氯酚合成二噁英路径也被发现存在于钢铁生产过程中.     

改性粉煤灰在处理锑矿选矿废水中的应用

针对锑矿选矿废水中锑和丁基黄原酸钠严重超标的问题,用酸改性粉煤灰对其进行吸附处理.试验结果表明,当改性粉煤灰处理选矿废水的最佳质量体积比(g.mL-1)为1:100,pH值为3,静置时间为4h时,可以将选矿废水中的锑浓度从28.611mg.L-1降到0.05mg.L-1以下,去除率达99.8%以上;废水中的丁基黄原酸钠浓度可从0.373mg.L-1降到0.02mg.L-1以下,去除率达95.0%以上.处理废水后的改性粉煤灰用硫酸-硝酸浸提,浸出液中重金属离子浓度均低于国家浸出毒性标准,表明改性粉煤灰是一种很好的锑矿选矿废水处理剂.     

改性粉煤灰处理洗涤剂废水优化条件的实验研究

利用改性粉煤灰絮凝、高效吸附作用处理洗涤剂废水：通过实验考察改性粉煤灰对洗涤剂废水处理效果影响的一系列参数,由正交实验得到优化实验条件。10g改性粉煤灰处理废水的量为150mL,pH值为7,搅拌时间40min,搅拌温度为50℃。在最佳条件下测得废水的COD和LAS去除率分别为82．48％和67．06％。