河湾路基侵蚀机理与防治措施

着重对河湾路基侵蚀机理进行了理论分析与试验研究。通过对弯道环流的形成，发展特性以及凹岸路基边坡泥沙运动规律及对路基侵蚀试验成果进行分析，发现凹岸路基的侵蚀主要是由河湾水流对路基边坡的淘刷以及路基的崩塌而引起，并提出了各种抵抗河湾路基侵蚀的防治措施。     

高温下钢及组合钢节点有限元建模及基于构件的分析方法(英文)

欧洲规范EC3 Part 1-1第5章[1]允许工程师使用一些先进的有限元分析软件来分析和设计钢结构,如线弹性、刚塑性以及二阶弹塑性整体分析。这3种极不相同的分析方法,能够用于简支、半连续以及连续节点模型中[2]。节点模型根据刚度的不同,可分为铰接、半刚性和刚性模型;按照强度的不同,可分为铰接、部分强度和全强度模型。尽管大多数的工程问题仅仅要求进行线弹性分析,但仍有一些特殊结构可能要求采用高级分析以降低施工成本,例如底层无支撑钢框架结构。在这种结构中,采用半连续节点(具有半刚度和部分强度特性)进行框架分析,会显著增强结构抵抗名义水平荷载、风荷载、整体缺陷、地震作用时的抗侧刚度和强度,因此在控制的水平荷载下计算的横向侧移可能在EC3允许的范围内。在基于性能的抗火设计中,结构抗火工程师可能想利用钢节点潜在的刚度和强度,尤其是有端板节点的钢结构,这是一种最常见的钢结构施工形式。端板可以是部分深度的,或者是延伸端板,涵盖了名义铰接、半刚性和完全刚性节点模型。本文给出了端板节点高温性能研究的一系列数值分析结果;应用基于构件的方法,建立了这些节点在高温下的力学反应计算公式,以及梁腹板剪应力分量、连接处的拉应力和压应力区域的力学模型。基于构件的方法能够考虑钢节点的热约束效应。对已有钢端板节点试验进行了有限元模拟和基于构件的分析表明,2种方法的分析结果与试验结果的偏差都是可接受的,包括热约束效应。     

服装商店火灾的实体灭火试验研究

为研究服装商店火灾蔓延和燃烧的特性及其对消防部队灭火作战的影响,按照真实的场景布置并进行了两次通风条件不同的服装商店火灾的实体灭火试验.试验结果显示由于服装商店内可燃物较多,燃烧耗氧量大,火灾的蔓延和强度受通风状况的影响较大.在供氧充足的情况下,服装商店火灾的蔓延发展可以分为引燃阶段、缓慢发展阶段和快速发展阶段三个阶段.当火灾发展到快速发展阶段的时候,火场的温度和烟气浓度很高,能见度低,灭火困难,导致灭火时间长,消防用水量大.     

Field investigation of pavement rehabilitation utilizing cold in-place recycling

Despite the widespread field and laboratory research works there are still a lot of unknown aspects about the cold in-place recycling. This paper presents the outcomes of a five year evaluation of a major highway in Iran which had been rehabilitated by cold in-place recycling. Before starting the rehabilitation process, a comprehensive field survey was performed. During the pavement surveying, type, severity and reason of distresses were investigated and PCI parameter was calculated. Furthermore, both destructive and nondestructive tests were carried out to evaluate the pavement condition and estimate the remaining life. On the basis of these investigations studied highway was divided to six design sections. Based on technical analysis four sections were recycled whereas two other sections were rehabilitated with the conventional cold milling and overlay method. Afterwards, the pavement performance was monitored during the next 5 years. After about six months of monitoring, structural failures were detected in about 10% of recycled areas. Based on field surveying, low compaction and load bearing of subgrade materials and lack of high quality unbound pavement layers accompanied by some shortcomings in recycled layer resulted in undesirable results in these areas. Based on obtained results and performed analysis a practical flowchart was presented which could be used as a project selection guideline.