The impact of the electricity tariff reform on renewable energies and energy efficiency investments: The case of the Italian residential market

This article investigates the impact that the electricity tariff reform is likely to have on investments in renewable energies (i.e., photovoltaics) and the adoption of energy efficiency measures (i.e., installation of heat pumps and efficient home appliances) in the residential market in Italy. The study develops detailed cost comparisons and simulations considering two different investment scenarios (before and after the reform) to conclude that the reform will: (i) have a negative impact on investments in photovoltaic systems; (ii) favor the adoption of energy efficiency measures, such as efficient home appliances.     

Microbial fuel cells: Advances in electrode modifications for improvement of system performance

There is an increasing trend to conduct the researches related to Microbial Fuel Cells (MFCs) in the recent years. Limited power output has been the major obstacle for the practical application and upscaling of MFCs. Attempts have been made on electrode modifications such as anode treatments, cathode modifications with catalysts and bio cathodes developments to produce varying degrees of improved output current depending upon the types of modifications. Power density and Coulombic efficiency have been considered as the important parameters to analyze the system performances. This paper overviews on the advances made in MFCs’ researches focusing on different types of electrodes modifications along with the involved methodology. Furthermore, the system performances of different modified MFCs are compared in terms of the power density and the Coulombic efficiency.     

Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

发酵类抗生素废水处理工艺及运行效果

介绍了内蒙古某抗生素废水处理厂的处理工艺流程、处理单元类型及其详细设计参数,通过对该污水处理厂半年内运行效果的调研,分析评价该污水处理系统的处理效果及出水指标;该水厂工艺流程对COD、TOC、氨氮、总氮、总磷、BOD和急性毒性的平均去除率分别为96.52%、95.83%、50.24%、55.20%、62.05%、98.52%和99.14%,COD、氨氮、总氮、总磷出水水质分别为477、438、556.7和7.69 mg/L,达到排放到城区下水道要求,园区内所有废水汇集到园区污水处理厂进行集中深度处理达标后排放水体。通过对该水厂工艺的介绍和水质分析,为我国抗生素生产企业面临的废水处理工艺类型选择及工程改造升级提供一定参考。     

Chlorinated solvents in a petrochemical wastewater treatment plant: an assessment of their removal using self-organising maps

The self-organising map approach was used to assess the efficiency of chlorinated solvent removal from petrochemical wastewater in a refinery wastewater treatment plant. Chlorinated solvents and inorganic anions (11 variables) were determined in 72 wastewater samples, collected from three different purification streams. The classification of variables identified technical solvents, brine from oil desalting and runoff sulphates as pollution sources in the refinery, affecting the quality of wastewater treatment plant influent. The classification of samples revealed the formation of five clusters: the first three clusters contained samples collected from the drainage water, process water and oiled rainwater treatment streams. The fourth cluster consisted mainly of samples collected after biological treatment, and the fifth one of samples collected after an unusual event. SOM analysis showed that the biological treatment step significantly reduced concentrations of chlorinated solvents in wastewater.     

芘高效降解菌ZQ_5的培养条件及无机元素对其降解效率的影响

以从我国最大的石油污水灌区之一——沈抚灌区污染土壤分离到的以芘为惟一碳源、能源生长的高效降解菌株ZQ5为实验材料,通过对菌株ZQ5培养条件的优化,以及采用摇瓶振荡培养方法测定菌株ZQ5对不同浓度芘的降解率,表明：菌株ZQ5在30℃振荡培养16 d后对150 mg/L芘的降解率为90.31%。通过模拟稻田施用N、P和K肥等的土壤环境,探索了无机营养元素对降解菌ZQ5降解能力的影响,发现土壤中混合加入N、P和K无机营养元素的降解率能达到82%以上,比单加某种营养元素对降解菌ZQ5的降解效果好。本研究结果可以指导稻田PAHs的原位生物修复。     

人工湿地构筑根孔作用下土壤物质分布状况

嘉兴市石臼漾湿地应用人工构筑根孔技术,以玉米秸秆和油菜秸秆按比例混合埋植于土壤亚表层,作为湿地的基质/填料。在湿地运行一年半后,按照正交设计表,以埋植秸秆的种类(S)、填埋的土壤层次(L)、距离秸秆外环的远近(D)和秸秆周围土壤的表观颜色(C)作为实验因素,对秸秆周围养分物质浓度、土壤酶活性以及铁含量进行采样分析。实验结果显示:玉米秸秆和油菜秸秆腐烂较充分,分别形成较发达的粗根孔和细根孔;根孔周围土壤呈中度还原状态;粗根孔具有较强的优先流效应,其周围土壤具有较高的养分物质含量和较低的Fe2+/Fe3+比。粗根孔周围土壤具有较高的磷酸酶活性,而细根孔周围具有较高的β-葡糖苷酶活性和脲酶活性。综合比较,人工湿地构建初期,径级较大秸秆腐烂后形成的粗根孔发挥着更高的水分传导效率和更强的物质截留效应。     

几种腐殖填料生物滤池COD去除效能比较研究

分别采用腐殖垃圾、泥炭、煤炭等腐殖填料及河沙构筑生物滤池,处理模拟废水,比较研究其COD去除效能及降解特征,为工艺填料改性提供理论依据。几种填料的扫描电镜分析图显示腐殖垃圾及泥炭以团聚体三维空间结构为主;煤炭与河沙表面粗糙程度较小,且主要由颗粒状物质构成。稀释平板涂布法分离出各生物滤池中发挥主要作用的微生物共3种,各系统菌落数量有差异,但种类相同。3种腐殖填料生物滤池在进水有机物浓度为500 mg/L及1000 mg/L时均有较理想的有机物去除效率。3种腐殖填料生物滤池中泥炭构筑的腐殖填料生物滤池有机物比降解速率最小,因而微生物比增长速率最小,微生物增长和自身氧化最易趋向于动态平衡,对应的饱和水力渗透系数最大,滤池最不易发生堵塞,最有利于腐殖填料生物滤池长期稳定运行,证明泥炭是一种优良的生物介质。     

基于Monte-Carlo方法的静电除尘器除尘效率

针对经典除尘效率未考虑诸多随机因素影响的问题,提出了基于Monte-Carlo方法的效率分析模型,并通过实验数据验证其可靠性。通过该模型分析了粒径大小、电场气流速度、电晕电压、两极间距、粒子浓度等因素对收尘效率的影响规律,结果表明:基于Monte-Carlo方法的仿真结果精度更高,能有效预测静电除尘器的收尘效率,对于改进静电除尘器设计具有一定的理论意义和实用价值。     

二级絮凝-活性炭处理实验室无机废水的效果

采用两级絮凝-活性炭吸附法处理实验室无机废水,研究了该方法对重金属、硫化物、挥发酚、苯胺和浊度等的处理效果。结果表明,在絮凝温度、搅拌、曝气及污水pH值调节范围一定的情况下,硫酸亚铁(FeSO4.7H2O)与聚合氯化铝(PAC)结合的二级絮凝方法能有效地降低污水中的重金属和硫化物等污染物。二级絮凝处理中,使用聚合氯化铝(PAC)对一级絮凝中去除效果不好的Cr6+的去除效果显著,去除率达到90%以上;活性炭对苯胺和硫化物的去除效果最佳,去除率都在90%以上。同时,该方法还有效降低了废水的浊度和色度。因此,是一种快速、低成本和工艺简单的处理实验室废水的有效途径。