城市防震减灾能力评估研究

首先论述了目前国内外关于城市地震灾害风险评估的研究,分析了这些研究取得的成果和存在的不足。然后,提出了城市防震减灾能力的概念,采用人员伤亡,经济损失和震后恢复时间作为衡量城市防震减灾能力强弱的3个最基本的要素。围绕这3个基本要素,列举出影响城市防震减灾能力的6大因素,在此基础上,提出了城市防震减灾能力评价指标体系的具体内容。     

The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

碱片-离子色谱法测定硫酸盐化速率影响因素

采用碱片-离子色谱法测定空气的硫酸盐化速率,方法在硫酸盐质量浓度为1.00~20.0 mg/L范围内线性良好(r≥0.999 0);碱片剪碎或不剪碎对空白碱片中硫酸根离子质量浓度的测定无明显影响,且高低两种加标浓度的回收率均在80.0%~120%之间;对于碱片实际样品,碱片剪碎更有利于硫酸根离子的快速溶出;随浸泡时间的延长,碱片中溶出的硫酸根离子质量浓度呈上升趋势,7 h硫酸根离子基本溶出完全,从保证结果质量和节省时间的角度考虑,确定最佳浸泡时间为3.5 h,建议碱片全部采取剪碎处理。     

精细化工固定源废气采样时机的选择探讨

以某医药企业某产品生产过程为实例,综合各工段生产步骤、时间、废气产生情况及估算的污染物浓度等因素,绘制各污染因子排放规律图,从而确定各污染因子排放浓度(排放量)最大的1 h为最佳采样时机。     

昌吉州农田地膜污染现状及治理对策

通过对昌吉州农田地膜使用现状进行调查,阐述了地膜污染的危害,并提出了适期揭膜、残膜回收、推广新型生物膜等措施与防治对策。     

空气质量AQI实时发布的改进探讨

针对《环境空气质量指数(AQI)技术规定(试行)》(HJ 633-2012)中对空气质量AQI实时发布存在的欠缺,从增加颗粒物1 h浓度的AQI分级浓度限值及颗粒物24 h滑动平均值计算方法改进着手,解决PM2.5和PM10的24 h滑动平均值实时延迟、1 h平均值代替24 h滑动平均值偏高等问题。     

基于ACF-AMDF的气井环空液面回波特征提取方法

为了精确有效地提取声波法检测气井环空液位的回波周期,在分析环空中测试波的传播特征及基音周期检测的基础上,提出1种基于检测信号短时自相关函数(ACF)及平均幅度差函数(AMDF)的液面回波周期提取方法;利用自主搭建的室内模拟实验系统开展了不同初始环空压力下环空液位检测实验;对检测信号进行中心削波处理并计算ACF/AMDF,提取出液面回波周期并与理论计算值对比分析;同时分析了现场环空液位检测信号,提取其回波周期。研究结果表明:提出的新方法能有效地用于提取环空液面回波周期;室内实验中,该方法最大误差绝对值为1.54%;该方法能够有效抑制液面回波信号中的随机噪声及接箍反射波等,处理后的信号曲线在回波周期处峰值更加突出、集中,而在其他位置更加平滑,提高了对液面回波周期特征的辨识能力。     

基于TVR的腐蚀油气管道失效概率及安全寿命研究

为避免因腐蚀导致油气管道失效,针对因管道特性和腐蚀尺寸的不确定性使得管道剩余强度成为概率模型的特点,建立了腐蚀管道强度损失随机模型;借助可靠性理论,通过分析管道腐蚀进程的时变性特点,将管道系统由损伤积累和抗力衰减导致的剩余强度随机化;提出基于穿越率的腐蚀油气管道失效评定及安全寿命预测方法。研究结果表明:腐蚀速率和运行压力对管道失效概率及安全寿命影响显著,管道尺寸影响适中,而相关系数和拉伸强度影响较小;若腐蚀速率Va=0.2 mm/a,VL=10 mm/a或局部腐蚀缺陷半径达到管道壁厚的0.5倍时,建议作为重点风险段监测并检修。所建方法是对腐蚀油气管道运营监控和风险评估的有益补充。     

两株壬基酚和双酚A高效降解菌株的筛选和降解特性

以桂林市上窑污水处理厂污泥脱水车间剩余污泥、上窑堆肥厂的堆肥堆料和桂林雁山镇森林土壤为菌源进行驯化,分离纯化并筛选得到2株能分别以壬基酚(NP)和双酚A(BPA)为唯一碳源和能源生长的降解菌株N-1和B-1。通过对菌株的16S r DNA序列同源性分析,初步鉴定N-1和B-1菌分别为Cupriavidus(贪铜菌属)、Acinetobacter(不动杆菌属)。通过两菌株分别降解NP和BPA的单因素实验,确定了降解动力学以及时间、温度、p H值对降解过程的影响。研究结果表明,细菌N-1,B-1的最佳初始目标污染物质量浓度为5~10 mg/L,降解40 h,N-1去除率可达49.63%,B-1去除率可达62.34%。细菌N-1对NP的去除半衰期t1/2为41.44~48.02 h;B-1对BPA的去除半衰期t1/2为35.23~37.33 h。细菌N-1,B-1的最佳降解温度均为30℃,最佳p H值均在6.5~7.5之间,即两种细菌在中温、中性条件下对NP和BPA降解效果最佳。     

振荡辐射下PMMA 热解与着火过程研究

采用正弦波变化振荡的辐射热流,对热厚PMMA(聚甲基丙烯酸甲酯)的热解和着火过程进行研究,同时采用数值模拟,对实验结果进行验证和补充。结果表明,表面温度和深度温度随着时间而增加,温度由于周期性的辐射而发生振荡,而振荡幅度随着深度的增加而衰减;表面温度与深度温度振荡存在时间延迟;着火时间随着热流振荡周期的增大而减小,主要由于平均热流密度随着周期增大而增大。