基于悬臂梁力学模型分析高边坡危岩体的稳定性——以四川省三清村高边坡W1危岩体为例

四川省苍溪县三清村高边坡的稳定性对当地居民的人身安全构成了威胁,需要对高边坡进行稳定性分析和评价。本文针对三清村高边坡自来水厂段W1危岩体,采用悬臂梁力学模型对其稳定性进行了定量计算及分析,结果表明:将计算所得的W1危岩体截面的最大剪切应力与截面允许的最大剪切应力进行对比,可以判断W1危岩体在自然条件下处于稳定状态,在暴雨和地震条件下处于不稳定状态,该结果与野外的宏观判断结论基本一致。     

降雨条件下某堆积体饱和-非饱和渗流及稳定性分析

降雨是诱发滑坡的主要因素之一。本文以西南地区某堆积体为例,基于非饱和土力学理论,考虑降雨入渗的影响,利用有限元方法,对持续强降雨条件下该堆积体的饱和-非饱和渗流场动态变化、变形破坏机理及稳定性进行了数值模拟和计算,结果表明:降雨入渗使坡体非饱和区土体的基质吸力减小,是导致堆积体稳定性降低的主要因素;随着降雨的持续,堆积体塑性区的范围及贯通距离增加,稳定系数逐渐降低,使整体失稳滑移的危险增大。     

基于强度折减法的港珠澳大桥沉管隧道干坞工程高边坡稳定性分析

在列举和分析比较当前岩土工程领域边坡稳定性分析的各种主要方法的基础上,概述了强度折减法的基本原理、主要特点和优势,并以港珠澳大桥沉管隧道干坞大型临时工程拟建场地的岩质高边坡为实例,应用强度折减法基于FLAC3D软件对该边坡的稳定性进行了计算和分析,确定了边界条件和强度参数,计算了该边坡的安全系数,结果表明自然工况下边坡处于稳定状态,底部开挖以后边坡趋于欠稳定状态,同时指出了边坡的关键变形部位,可为后续的设计和施工提供参考。     

深水河大桥桥墩边坡稳定性分析

深水河大桥桥墩边坡地处广乐高速深水河大桥段,其稳定性直接关系着桥墩桩基工程能否顺利施工和整段广乐高速的工程进度。本文采用定性分析和定量计算的方法对深水河大桥桥墩边坡稳定性进行了分析,定性分析主要是通过赤平投影法作图初步分析边坡局部可能出现的组合滑面破坏模式,再取典型的楔形体进行破坏模式分析,定量计算主要是采用Bishop法分别计算该边坡在不同工况下的稳定系数,从而对该边坡的整体稳定性进行评价,以便提出相应的治理措施。     

模糊评判在岩质边坡稳定性评价中的应用

在工程实践中,影响岩质边坡稳定性的因素众多,不同因素的影响程度不相同,具有不确定性,因此选择合适的方法对岩质边坡稳定性进行评价尤为关键。本文采用模糊综合评判方法对岩质边坡进行稳定性评价,首先阐明了如何建立模糊评判体系以及权重和隶属度的确定方法,然后以某岩质边坡为实例,采用模糊评判方法对其稳定性进行了评价,结果表明模糊评判的结果与实际情况较为吻合,说明该方法真实、有效,具有一定的借鉴意义。     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

以高岭土为原料合成高稳定性介孔分子筛

以廉价的高岭土和硅酸钠为硅源,用水热法合成了介孔分子筛。采用X射线粉末衍射、Fourier变换红外光谱、热分析、N2物理吸附、扫描电子显微镜和透射电子显微镜埘样品进行了表征,同时研究了样品的热稳定性和水热稳定性。结果表明：长程有序的介孔分子筛平均孔径约为2．75nm：经900℃焙烧3h或100℃水热处理6d,样品的介孔结构不被破坏,说明样品具有高的热稳定性和水热稳定性。     

焦化废水对蚕豆和大麦毒性的影响

以COD作为主要参照指标,研究了焦化废水在符合GB 13456-92<钢铁工业水污染物排放标准>焦化一级、二级排放标准限值要求时,对蚕豆和大麦幼根生长、根尖细胞遗传毒性的影响.结果表明:在实验周期内,焦化废水对蚕豆幼根根长、根重和有丝分裂指数的影响不大;对大麦幼根根重无明显影响,而对大麦根长和有丝分裂指数有促进作用.焦...     

路面径流水环境下交通承载力分析

为了对路面径流水容许污染总量控制下的交通承载力问题进行探讨,利用神经网络具有的非线性映射能力和遗传算法具有的全局随机搜索能力,结合公路路面径流水质检测数据,提出了一种基于遗传神经网络进行公路交通环境承载力反计算的分析方法,应用该方法可根据路面径流水质污染数据反演出路段交通量大小,并可据此进行交通量与路而径流水质污染的关...     

陶粒CANON反应器的接种启动与运行

通过CANON接种污泥,以人工配制无机高氨氮废水为对象,研究以陶粒为填料的CANON反应器启动与运行情况,结果表明:①陶粒可以作为CANON反应器合适填料,温度通过水浴控制在30℃±1℃,HRT为9 h、pH控制在7.00~8.08之间,经过60 d成功启动了CANON反应器,TN的去除负荷达到0.79 kg·(m3·d)-1;②在温度30℃时,陶粒CANON反应器中临界DO范围在1.12~1.69 mg·L-1之间,CANON反应器中短程硝化和厌氧氨氧化性能可维持稳定,高于此范围时,会出现CANON反应器中短程硝化不稳定现象;③在温度25℃,控制DO在1.01~1.54 mg·L-1之间时,尽管NO-3-N变化值与TN变化值的比值(δNO-3-N/δTN)略微偏离理论值0.127,为0.150~0.204,但CANON反应器脱氮性能趋于稳定,TN去除率最高为75.56%,TN的去除负荷最高达到0.97 kg·(m3·d)-1,这意味着CANON工艺的适宜温度范围至少可以降低至25℃.