印染废水集中处理工程的实例分析

针对印染企业集中园区产生的综合废水复杂多变,必要选择合式的处理工艺,因此,以某印染企业集中园区的污水处理厂为例,采用厌氧＋好氧＋物化组合工艺,并对废水的脱色和可生化性的改善进行了试验研究,通过类比调查,优化工程设计参数;经工程实践证明,综合印染废水经该工艺处理后,能达到一级排放标准.     

Effect of selected organic and inorganic snow and cloud components on the photochemical generation of nitrite by nitrate irradiation

The effect of selected organic and inorganic compounds, present in snow and cloudwater was studied. Photolysis of solutions of nitrate to nitrite was carried out in the laboratory using a UVB light source. The photolysis and other reactions were then modelled. It is shown that formate, formaldehyde, methanesulphonate, and chloride to a lesser extent, can increase the initial formation rate of nitrite. The effect, particularly significant for formate and formaldehyde, is unlikely to be caused by scavenging of hydroxyl radicals. The experimental data obtained in this work suggest that possible causes are the reduction of nitrogen dioxide and nitrate by radical species formed on photooxidation of the organic compounds. Hydroxyl scavenging by organic and inorganic compounds would not affect the initial formation rate of nitrite, but would protect it from oxidation, therefore, increasing the concentration values reached at long irradiation times. The described processes can be relevant to cloudwater and the quasi-liquid layer on the surface of ice and snow, considering that in the polar regions irradiated snow layers are important sources of nitrous acid to the atmosphere. Formate and (at a lesser extent) formaldehyde are the compounds that play the major role in the described processes of nitrite/nitrous acid photoformation by initial rate enhancement and hydroxyl scavenging.     

Integrated catalytic wet air oxidation and aerobic biological treatment in a municipal WWTP of a high-strength o-cresol wastewater

This study examines the feasibility of coupling a Catalytic Wet Air Oxidation (CWAO), with activated carbon (AC) as catalyst, and an aerobic biological treatment to treat a high-strength o-cresol wastewater. Two goals are pursued: (a) To determine the effect of the main AC/CWAO intermediates on the activated sludge of a municipal WasteWater Treatment Plant (WWTP) and (b) To demonstrate the feasibility of coupling the AC/CWAO effluent as a part of the influent of a municipal WWTP. In a previous study, a high-strength o-cresol wastewater was treated by AC/CWAO aiming to establish the distribution of intermediates and the biodegradability enhancement. In this work, the biodegradability, toxicity and inhibition of the most relevant intermediates detected in the AC/CWAO effluent were determined by respirometry. Also, the results of a pilot scale municipal WWTP study for an integrated AC/CWAO-aerobic biological treatment of this effluent are presented. The biodegradation parameters (i.e. maximum oxygen uptake rate and oxygen consumption) of main AC/CWAO intermediates allowed the classification of the intermediates into readily biodegradable, inert or toxic/inhibitory compounds. This detailed study, allowed to understand the biodegradability enhancement exhibited by an AC/CWAO effluent and to achieve a successful strategy for coupling the AC/CWAO step with an aerobic biological treatment for a high-strength o-cresol wastewater. Using 30%, as COD, of AC/CWAO effluent in the inlet to the pilot scale WWTP, the integrated AC/CWAO-biological treatment achieved a 98% of total COD removal and, particularly, a 91% of AC/CWAO effluent COD removal without any undesirable effect on the biomass.     

Dioxin formation in pulp and paper mills of India

Samples of effluents, sludge, pulp, final products (paper) and soil were collected from the identified pulp and paper mills in India. The samples were analysed for 2,3,7,8-tetrachloro-dibenzo-p-dioxin (2,3,7,8-TCDD) and other dioxin congeners and precursors. Pulp and paper mills using chlorine for the bleaching process showed the presence of 2,3,7,8-TCDD in effluent samples. In the effluent and pulp samples from mills where chlorine dioxide was used as a bleaching agent, the 2,3,7,8-TCDD congener ranged from below the detection limit 0.05 to 0.12 ngL⁻¹/ngg⁻¹. The relative standard deviation of reproducibility and the percent recovery of 2,3,7,8-TCDD were 2.07 and 82.4% in pulp and 2.8 and 92% in effluent, respectively. The 1,3,6,8-TCDD was the only other major dioxin congener found in the treated and untreated effluent and sludge samples. However, dichlorobenzene, trichlorophenyl, and hexachlorobiphenyl were detected in all samples. The formation of dioxins can be minimised by replacing chlorine with chlorine dioxide in bleaching processes in pulp and paper mills.     

预处理后的活性污泥对锌吸附的研究

剩余活性污泥处理是当今的热点问题,从活性污泥资源化的角度出发,将活性污泥加工成为锌离子的生物吸附剂,比较了8种方法预处理后的活性污泥对锌的吸附效果,分析了这8种方法对污泥吸附能力的影响机理.对经过NaOH和H2O2处理的污泥的吸附特性和影响因素进行了研究,结果表明该吸附过程符合Psemio-seconal Order吸附动力学模型及Freunomch吸附等温模型,低pH不利于吸附,适当提高温度可以增强吸附效果,增加污泥吸附剂浓度可以增加金属离子去除率,但是单位质量吸附剂吸附金属离子的量减小.用红外光谱对比的手段对吸附机理进行了探讨,结果表明污泥颗粒表面一些含氮氧的基团对zn.'的络合作用是主要的吸附机理.该研究在污泥资源化和废水中锌离子的去除方面有重要意义.     

废水产氢产酸/同型产乙酸耦合产酸条件优化

为了更好地发挥产氢产酸/同型产乙酸耦合系统在废水厌氧发酵生产乙酸方面的优势,有必要寻找一种简单有效的方法以获得该系统产酸的优化条件.利用经过加热处理并活化的厌氧污泥作种泥,以模拟废水中的葡萄糖为底物,针对发酵时间、底物浓度、种泥浓度、初始pH进行4因素10水平均匀设计实验,得到了乙酸生产指标与产酸条件之间关系的回归方程;也得到了以高乙酸产量为主要目标导向同时兼顾高乙酸产率和高乙酸生产强度目标的优化条件;优化条件实验乙酸浓度比均匀设计中最高乙酸浓度提高20%左右.研究表明,将均匀设计应用于废水产氢产酸/同型产乙酸耦合产酸条件优化,可以避免盲目性,迅速获得满意结果.     

碱熔融法合成NaA和NaX型粉煤灰沸石的品质表征

以粉煤灰为原料采用碱熔融法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构、性能和应用指标进行了详细表征.经x射线衍射和IR光谱分析,表明合成产物是无杂晶生成的NaA和NaX型沸石相;在扫描电镜观察下,产物分别具有NaA和NaX型沸石的立方体和八面体晶体骨架结构.DTA分析表明了合成产物中沸石水的存在,且产物热稳定性较好.通过对比,粉煤灰合成的NaA和NaX型沸石的比表面积达到了相应商品沸石的66.9%和83.6%;孔容为41.1%和70.2%;阳离子交换容量(CEC,cation exchange capacity)为82.93%和84.31%.通过比较化学组成表明,大规模应用合成产物不会对环境造成危害.     

锌精炼铅塔燃烧系统烟气温度模糊控制研究

针对锌精馏铅塔动态过程中的非线性、非最小相位特征、不稳定性、时滞和负荷干扰,基于模糊控制策略下给出了锌精馏铅塔燃烧系统新的控制方法.运用模糊控制系统对锌精馏铅塔的烟气温度进行仿真研究和实时控制结果表明,该研究所设计的模糊控制器能够克服许多干扰因素,产生了良好的控制效果.     

污水厂污泥一体化竖式强化渗滤浓缩自然干化与消化研究

针对目前国内污泥处理处置存在的问题,为实现污泥浓缩消化一体化,开发了污泥一体化强化渗滤浓缩自然干化与消化新工艺反应器,并进行了城市水厂污泥处理试验.结果表明,在有机负荷为0.8 kg VSS/(m3·d)、平均水力停留时间为8.3 d、污泥停留时间为120 d的条件下,污泥有机物去除率可达到44.4%,排泥含水率达到79.1%,污泥消化与浓缩过程起到了相互促进的作用.渗滤液须抽回至污水处理厂处理.     

Electrochemical determination of anaerobic microbial decay coefficients

The biokinetics of attached and suspended bacteria are an essential component of activated sludge models, anaerobic digestion models and biofilm models. These parameters are often assumed or “confirmed” based on the goodness-of-fit of the bioprocess models. Using a microbial fuel cell with a baffled reactor chamber, the attached- and mixed-growth microbial decay coefficients were evaluated under anaerobic conditions. The capability for real-time voltage recording allows easy and accurate measurement of the anaerobic microbial decay coefficients (b_L, lysis-regrowth approach), which were determined to be 0.11 ± 0.01 and 0.15 ± 0.01 d⁻¹ for attached (to anode) and mixed (present in the anode chamber) growth microorganisms, respectively. The corresponding half-saturation constants using glucose as a substrate were 204 ± 10 and 123 ± 1 mg COD l⁻¹. Hence, like an oxygen uptake rate-based approach to measure the microbial kinetics under aerobic conditions, the electrochemical recording provides an attractive method to measure anaerobic microbial decay coefficients.