POTENTIALS FOR REUSE OF WASTEWATER IN NORTH CENTRAL TEXAS1

ABSTRACT There are several possible ways in which wastewater from municipalities may be reclaimed and reused so as to minimize the need for imported water in North Central Texas. The rationale for reuse is enhanced by the fact that new water quality requirements in the Trinity River system will necessitate a very high degree of treatment at municipal sewage plants, just for discharge to surface streams. The largest potential market for municipal effluent is the steam-electric power industry. Within the next decade the generating capacity for electric power in North Central Texas will have to be more than doubled to meet increasing demand. Adequate supplies of condenser cooling water for such expansion will be difficult to obtain and assure. New large power stations might advantageously be located adjacent to municipal wastewater treatment plants, to utilize effluent as make-up water for cooling towers. Experience elsewhere has shown that well-treated wastewater can be used for cooling tower make-up with a minimum of trouble, with a considerable saving in overall cost, and with conservation of pristine water for other uses.     

DESIGN OF DESALTING PLANTS FOR CONJUNCTIVE OPERATION1

ABSTRACT The selection of an evaporator design must reflect the balancing of captial cost (primarily in heat exchanger surface and vessels) against operating cost (primarily steam cost) to achieve minimum cost. In a conjunctive plant the tendency is to select a low-capital cost, high-operating cost plant. In addition, it is advantageous to use a high-capacity plant which needs to be operated much less of the time than a plant which is sized just at the needed rate. For example, in the study of a possible system to satisfy a future increase of 450 MGD in water supply to New York Qty, a plant of 750 MGD capacity was selected as optimum. This plant, of the advanced VTE-MSF process type, would have a performance ratio of 9 lb product/1000 Btu as compared to 10-13 normally used for base-loaded plants. Steam would be supplied by a multi-unit dual-purpose nuclear power plant. The most economical type of energy supply would be “interruptible”; the steam would be used by a low pressure turbine to generate electricity during periods of peak electrical demand but would be available to the desalting plant at other times. The low pressure turbine would be available as spinning reserve during desalting plant operation. It is estimated that the desalting plant would have a load factor of 27 per cent over its life.     

Current and Future Strategies for Water and Wastewater Management of Istanbul City

Istanbul has experienced rapid increases in population to more than 12 million people, which has created infrastructure problems of water supply and wastewater treatment and disposal. In this article, the achievements and approaches of the Istanbul Water and Sewerage Administration (ISKI) to solve the water shortage problem and to improve services are summarized. Istanbul had a very severe water shortage problem in 1994 because of ignorance of the implementation of the needed projects. After reviewing the reasons and causes of the problem, new priority criteria adopted after 1994 are given. Following the implementation of the projects determined according to the aforementioned criteria, water supplied has exceeded the water demand. The added capacity is equal to one to three times of the capacity built up to 1994 for water treatment, service reservoirs, pumping stations, transmission lines, and the water distribution network; water quality has been improved the meet local and international potable water standards. Unaccounted for water has been reduced from 60% to 27%. The percentage of treated wastewater has been increased from 10% to 90% in 8 years, resulting in drastic improvements and rehabilitation of the Golden Horn and coastal water quality. Through improved customer services, complaints were reduced from 33% in 1994 to 0.3%. Some of the main criteria and the approaches behind this success are summarized. Published online     

A Quantitative Safety Assessment Model For Transgenic Protein Products Produced In Agricultural Crops

Transgenic plants are now being used to develop pharmaceutical and industrial products in addition to their use in crop improvement. Using confinement requirements, these transgenic plants are grown and processed under conditions that prevent intermixing with commodity crops. Regulatory agencies in the United States have provided guidance of zero tolerance of these new industrial crops with commodity crops. While this is a worthy goal, it is theoretically unattainable. In spite of the best containment practices, there is a potential risk using any system of production due to unforeseen incidences including natural disasters or exposure to workers. The precautionary principle has been used for numerous regulated articles in addressing the potential risks of new products and technology based on a risk assessment in similar situations. We present here a risk assessment model that could be used as a start to develop an accepted model for the industry. The model is based on current risk models used for other regulated articles, but adapted for these types of products. This could be used to determine action levels in the event of an unintended exposure or to ensure that detection or confinement methods are adequate to avoid risks. As an example, aprotinin, a therapeutic protein now being produced in maize, was evaluated for potential risk to humans using this model.     

THERMAL GRADIENTS IN RIVERS AND RESERVOIRS DUE TO HEATED PLANT EFFLUENTS1

ABSTRACT The direction of heated effluents from large thermal power plants into streams and lakes has been a matter of public concern for some time, and the collection of prototype data related to the hydraulic aspects has taken on massive proportions. Unfortunately, most of the data are proprietary and not available for public analysis. The authors have endeavored to collect such data as are available to them for the initiation of steps toward generalization and the discussion of some of the more evident hydraulic considerations. The study is primarily concerned with rivers, including estuaries, with some interest in cooling ponds.     

西部大开发要加强生态环境保护和建设

在实施西部大开发进程中,对原本生态环境十分脆弱的现状必须予以重视,切实加强生态环境保护与建设。     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.     

Comparative Evaluation of Biomonitoring Techniques of Tropospheric Ozone

During a survey of tropospheric ozone pollution carried out using tobacco plants (Nicotiana tabacum L.) cv. Bel-W3, ozone- supersensitive, and cv. Bel-B, ozone-resistant, as bioindicators, the effectiveness of the traditional biomonitoring method, based on the use of adult plants, was compared with an innovative miniaturized kit of seedlings. The ratio of foliar and cotyledonar necrosis, respectively, was estimated as ozone injury rate. The miniaturized kit proved to be advantageous, since seedlings need only easy growth procedures and a large number of individuals can be placed in a small space, supplying good data amounts for statistical elaboration. Moreover, correlation studies among cotyledonar and foliar injury index and ozone levels monitored through physico-chemical measurements and results of analysis of variance tests highlighted the high sensitivity of the innovative methodology.     

Database for accidents and incidents in the fuel ethanol industry

The purpose of the present research is to collect information about accidents and incidents that have occurred at fuel ethanol facilities from 1998 to October 2014, and to keep complete unified records of them in a database. The developed database contains general information about the accident or incident, its sequence, mitigation measures, its causes and consequences for humans, environment and for the plant. Until now, this information is not available. The work consisted in gathering information from different documental sources and subsequent organization in a database. It complements the previous work made for biodiesel industry and fills the existing gap in the field of ethanol. Knowledge about this information enables us to manage plant risks, since the accidents that are more likely to occur and the main sources of risk can be easily identified. Also, it makes it possible to exchange information with interested third parties. Statistical analysis shows that accident frequency has an oscillatory behavior, rising in the last year. Fire is the most common type of accident, while equipment mechanical failure is the main cause of accident. Partial material loss has been identified as the most common consequence. Finally, some conclusions are obtained concerning to the importance of having an updated and complete accident and incident database.     

绿灯倒计时信号对驾驶行为的影响

为揭示绿灯倒计时信号对交叉口交通安全的影响,针对不同交通负荷与信号控制方式下的驾驶行为开展研究。选择大连市内的倒计时信号交叉口与非倒计时信号交叉口各2处,开展车辆行驶速度及不良驾驶行为调查。用数理统计方法,对比分析2类交叉口在平峰与高峰时段的车辆行驶速度特性,同时对比分析上述不同条件下闯黄灯及违规变道行为的发生数量。研究表明,绿灯倒计时信号在绿灯时间末期,会诱发一部分驾驶员加速行驶通过交叉口;绿灯倒计时信号在平峰时段对闯黄灯行为数量的影响较小,而对违规变道行为的数量有显著影响。