Toluene removal characteristics by a superimposed wire-plate dielectric barrier discharge plasma reactor

A superimposed wire-plate dielectric barrier discharge reactor was used to remove toluene in this study. The effects of oxygen content, gas flow rate, gas initial concentration and with/without catalyst on toluene decomposition were investigated. It was found that an optimal toluene removal was achieved when the oxygen content was about 5%. Under this condition, the highest toluene removal efficiency of 80.8% was achieved when the gas concentration was 80 mg/m^3. The toluene removal efficiency decreased with the increase of the gas flow rate and the initial concentration of toluene. In addition, the ozone concentration decreased with the increase of the initial concentration of toluene. It suggested that combining DBD （dielectric barrier discharge） with Co3O4/Al2O3/foam nickel catalyst in-situ could improve the toluene removal efficiency and suppress ozone formation. Products analysis showed that the main products were CO and CO2 when oxygen was more than 5%.     

乌梁素海冰盖中微塑料的分布特征及其与盐度、叶绿素a的响应关系

目前关于淡水湖泊冰盖中微塑料的分布特征研究还鲜见报道.为阐明乌梁素海冰盖中微塑料的赋存特征以及其与冰盖盐度、叶绿素a浓度之间的响应关系,通过野外采样、显微镜观察、傅里叶红外光谱测定和相关性分析等方法,对冰封期乌梁素海冰盖中微塑料的丰度、颜色、形状和种类进行鉴定,通过相关性分析探求微塑料在冰盖中的分布特征及其与盐度、叶绿...     

Application of dynamic risk analysis in offshore drilling processes

Process safety is the common global language used to communicate the strategies of hazard identification, risk assessment and safety management. Process safety is identified as an integral part of process development and focuses on preventing and mitigating major process accidents such as fires, explosions, and toxic releases in process industries. Accident probability estimation is the most vital step to all quantitative risk assessment methods. Drilling process for oil is a hazardous operation and hence safety is one of the major concerns and is often measured in terms of risk. Dynamic risk assessment method is meant to reassess risk in terms of updating initial failure probabilities of events and safety barriers, as new information are made available during a specific operation. In this study, a Bayesian network model is developed to represent a well kick scenario. The concept of dynamic environment is incorporated by feeding the real-time failure probability values (observed at different time intervals) of safety barriers to the Bayesian network in order to obtain the corresponding time-dependent variations in kick consequences. This study reveals the importance of real-time monitoring of safety barrier performances and quantitatively shows the effect of deterioration of barrier performance on kick consequence probabilities. The Macondo blowout incident is used to demonstrate how early warnings in barrier probability variations could have been observed and adequately managed to prevent escalation to severe consequences.     

锂电池检测的安全标准及安全防护研究

为评估并提高锂电池在使用、储存和运输过程中的安全,本文归纳总结了国内外锂电池安全检测的相关标准,对标准中测试项目异同作了重点分析和对比,并讨论了锂电池的安全风险及风险分级情况。同时,鉴于锂电池检测过程中可能出现的起火、爆炸等危险,探讨了电池检测过程的安全防护技术,并从样品区和试验区两方面提出了安全防护要求和建议。     

AHP与GA-SVM耦合模型在滑坡预警中的应用*

为了减少滑坡造成的损失,提高滑坡预测的准确性,通过搭建灾害模拟平台获得滑坡的实验数据,在获得多组模拟实验数据后,分析各变量的特性。首先,通过层次分析(Analytic Hierarchy Process,AHP)算法,对滑坡进行危险度划分;然后,通过支持向量机(Support Vector Machine,SVM)建立模型,遗传算法(Genetic Algorithm,GA)再优化SVM参数,提出1种层次分析法与GA-SVM相耦合的模型。研究结果表明:AHP方法划分后的数据,通过GA与SVM结合建立的模型精度较好,实验预测结果与实际结果较为吻合,与单一SVM相比,精度更高,结果更好,更加适用于多变量的复杂非线性滑坡预警。     

基于模糊推理的FRAM事故定量分析方法研究

为有效克服FRAM事故分析中无法进行定量分析的缺陷,提出结合模糊推理技术的Fuzzy FRAM模型。此改进模型基于FRAM识别系统运行状态;依据功能输出要素的时间/精度属性利用Matlab构建2阶模糊推理系统量化功能输出质量;根据通用性能条件(CPC)及功能输入耦合端口构建功能评价体系,针对评价体系中存在的不确定性信息融合及建模问题,采用模糊证据推理技术,通过模糊信度结构建立、数据处理、信息融合测度后获得功能的风险指数;以既有铁路危险品运输事故为例,验证方法的可行性。结果表明:Fuzzy FRAM模型的评估结果较为精确,是FRAM分析方法的有效补充。     

中国南海高温高压井钻完井损失工时事件统计分析

为研究我国南海高温高压井钻完井、测试损失工时事件规律,对2009—2018年中国南海高温高压探井钻井日志进行分析,汇总501起海上高温高压井钻完井损失工时事件,并将其划分为复杂情况及事故停工、自然停工、修理停工3大类进行研究。结果表明:复杂情况及事故停工事件数与年份无明显关联,但与地质资料准确度关系密切,修理停工事件数随年份呈现震荡下降趋势;复杂情况及事故停工总损失工时最多,其中卡钻损失工时占比最高;修理停工总损失工时最少,其中钻井设备故障损失工时占比最高;灾难天气、洋流或地质活动是造成损失工时最多的原因,不安全行为是单起事件平均损失工时最多的原因,设备老化是修理停工最主要原因。研究结果可为后续高温高压井钻完井非生产时间成本估计模型提供数据基础。     

维修时间不确定性下配电网灾后维修队安排的鲁棒恢复研究*

为最小化灾后配电网损失量,准确描述完整维修队工作时间（分为路途时间与具体维修时间）,依据台风路径对维修队所需路途时间进行分类,并利用期望概率描述具体维修时间的不确定性。建立2阶段分布式鲁棒优化模型,采用CCG算法分析国内某地区配电网算例发现:考虑维修时间不确定性可以有效减少配电网损失量。     

基于第二次全国污染源普查质量保证的思考及体系建设初探

通过对清查数据的结果分析,确定第二次全国污染源入户普查的对象,基于企业填报、现场入户、资料收集审核、数据核查等具体工作的实施与开展,思考和归总普查工作中影响数据质量的现实问题和难点,初步构建污染源普查质量保证体系,以期为全国污染源普查数据质量保证提供有益参考。     

非金属管道微小泄漏动力学数值模拟和试验对比

为了探索非金属输送管道泄漏规律,从数值模拟和试验两个角度,对液体PE管道发生泄漏前后管道内流体与泄漏口的流动状态进行了对比分析,为判定管道泄漏提供了依据。运用FLUENT软件针对PE液体管道泄漏,在不同孔径、不同压力下,构建管道泄漏模型分别进行仿真,分析不同泄漏情景下压力梯度的分布规律。同时在近似相同条件下进行PE管道两点泄漏模拟试验。结果显示:数值模拟与试验结果基本一致,泄漏孔处压力、流速均与管内初始压力成正相关;初始压力和孔径的增大,会导致管内压力下降速度上升,但最终会趋于稳定值。