上海崇明东滩人工湿地冬春季水鸟的生境因子分析

为了解围垦后不同土地利用方式对水鸟的影响,于2011年11月~2012年5月对上海市崇明东滩湿地公园、北八滧鱼塘、98大堤内抛荒鱼塘、以及捕鱼港互花米草控制示范区的芦苇塘4类人工湿地开展水鸟调查,在冬季共统计到水鸟20 050只,隶属于5目9科34种,春季共统计到水鸟5 080只,隶属于6目7科47种。方差分析表明,冬、春季4类人工湿地水鸟种类、密度、多样性均有显著差异。运用相关分析对水鸟种类、密度、物种多样性、均匀性指数等群落特征及调查样方内明水面面积、平均水位、人为干扰、裸露浅滩面积、植被面积等环境因子进行水鸟生境因子选择分析,结果表明,冬季水鸟种类、多样性与明水面面积呈极显著正相关,水鸟种类与植被面积呈极显著负相关;春季种类、密度、多样性都与裸露浅滩面积呈极显著正相关。崇明东滩人工湿地在水鸟保育中起到了重要的作用,根据不同水鸟对生境因子的要求,冬季应保持较大的明水面面积和一定的水深,为雁鸭类建立合适的栖息地。春季应保持一定的裸露浅滩面积,为鸻鹬类提供良好的避难所。因此,水位调控成为崇明东滩人工湿地自然保育的重要手段     

成都市河流生态健康评价

研究以成都市域内河流为研究对象,通过采样分析得到水质、生境状况、浮游藻类、底栖动物等相关指标,利用综合指标体系法,评价成都市域内河流生态系统健康状况,并结合成都市人口、土地利用、地区生产总值等因素分析人类活动与河流生态健康的关系。结果表明:成都市河流浮游藻类以硅藻和绿藻为主,部分中下游采样点出现以蓝藻为主的情况;底栖动物以指示有机污染的颤蚓科出现的频率最高,约48%的采样点以颤蚓科为优势种;约74%的河流生态健康状况为"差"或"很差",河流生态健康状况整体呈现中上游优于下游、城市周边优于市区的特征;人口密度、人类活动用地比例与河流中氨氮呈显著正相关,人类活动会显著影响河流生态系统健康。     

Factor input structure,environmental policies,and the export quality upgrade: a perspective of heterogeneity

In the analysis of how environmental regulation affects the comparative advantage of trade, existing literature ignores industry’s inherent heterogeneity, which draws remarkably different conclusions. In view of this, the paper analyzed the mechanism of environmental regulation on the export quality of different industries from the perspective of factor input structure heterogeneity. Based on the panel data of China’s manufacturing industry, the paper used the system generalized method of moments method to examine the heterogeneity influence of environmental regulation on manufacturing export quality. The study found that, first, environmental regulation affected the export quality upgrade of the manufacturing sector through offset effect and compensation effect, and the direction of the impact would mainly depend on the industry’s factor input structure. Second, for industries with larger fixed-asset investment (FAI) ratio in the factor input structure, the current environmental regulation policy was not conducive to the export quality upgrading of the industries. However, there was a significant U-shaped dynamic relationship between them. As environmental regulations became stricter, when regulatory stringency went beyond the inflection point, the policy would promote the upgrading of export quality. But for industries with smaller proportion of FAI, environmental regulation exerted a favorable impact on the export quality upgrade, following a J-shaped marginal growth curve. Third, for industries with different factor input structure, their export quality had been effectively upgraded as expected by factors like human capital investment, independent R&D, technology introduction, and foreign direct investment; but raising per capita capital stock and expanding enterprise size did not produce significant direct impact on export quality upgrade. These conclusions remained robust after using different measurement methods and replacing with other variables. Therefore, this paper suggests that governments should take industry heterogeneity into consideration and formulate differentiated hierarchical environmental policies. Besides, they should strengthen the enforcement of the current environmental regulation policies. By doing so, enterprises are forced to improve their technology and product quality so that they can better cope with rising compliance costs, eliminate backward industries, and resolve excess capacity. In this way, the economic structure would be transformed and upgraded from the supply side.     

Towards an ecologically meaningful classification of the flow biotope for river inventory, rehabilitation, design and appraisal purposes

Recent research into the physical and ecological status of rivers has focused upon rapid field-based assessments of mesoscale habitat features in order to satisfy international regulatory requirements for habitat inventory and appraisal. Despite the low cost and time efficient nature of rapid field surveys, the robustness of such techniques remains uncertain. This paper uses data from over 4000 surveyed UK river reaches in the UK River Habitat Survey (RHS) database in order to seek linkages between surface flow conditions (flow biotopes), local channel morphology (physical biotopes) and biologically distinct vegetative and minerogenic habitat units (functional habitats). Attempts to identify one-to-one connections between surface flow types, units of channel morphology and functional habitats oversimplify a complex and dynamic hydraulic environment. Instead, a nested hierarchy of reach-scale physical and ecological habitat structures exists, characterised by transferable assemblages of habitat units. Five flow biotopes show strong correlations with functional habitats, and differing combinations of three of these account for over 60% of the distribution for all functional habitats. On this basis, a classification of environments for ecological purposes is proposed. Principal components analysis and agglomerative hierarchical clustering analysis are employed to objectively validate the proposed classification. Flow biotope assemblages may also represent reach-scale channel morphologies (step-pool, riffle-pool and glide-pool), although functional habitats exhibit differing 'preferences' for rougher or more tranquil environments within these. While the data and analysis are specific to the UK RHS, the methods and findings have wider application in situations, where rapid field appraisal methods and associated databases are deployed in water resource inventory and river rehabilitation design.     

Assessing the Effectiveness of a Constructed Arctic Stream Using Multiple Biological Attributes

Objective assessment of habitat compensation is a central yet challenging issue for restoration ecologists. In 1997, a 3.4-km stream channel, designed to divert water around an open pit diamond mine, was excavated in the Barrenlands region of the Canadian Arctic to create productive stream habitat. We evaluated the initial success of this compensation program by comparing multiple biological attributes of the constructed stream during its first three years to those of natural reference streams in the area. The riparian zone of the constructed stream was largely devoid of vegetation throughout the period, in contrast to the densely vegetated zones of reference streams. The constructed stream also contained lower amounts of woody debris, coarse particulate organic matter (CPOM), and epilithon; had lower coverage by macrophytes and bryophytes; and processed leaf litter at a lower rate than reference streams. Species richness and densities of macroinvertebrates were consistently lower in the constructed stream compared to natural streams. This contributed to differences in macroinvertebrate assemblage structure throughout the period, although assemblages showed some convergence by year 3. The effectiveness of the constructed stream to emulate natural streams varied somewhat depending on the biological attribute being evaluated. Assessments based on individual attributes showed that minimal to moderate levels of similarity between the constructed stream and natural streams were achieved. A collective assessment of all biological and ecosystem attributes suggested that the constructed stream was not a good surrogate for natural streams during these first years. Additional time would be required before many characteristics of the constructed stream would resemble those of reference streams. Because initial efforts to improve fish habitat in the constructed stream focused on physical structures (e.g., weirs, vanes, rock, groins), ecological factors limiting fish growth were not considered and likely constrained success. We suggest that a greater focus on organic characteristics and vegetation within the stream and its riparian zone could have accelerated compensation. The addition of woody debris and CPOM, combined with planting of shrubs and herbs along the stream, should provide a source of allochthonous matter for the biotic community while large cobble and boulders should improve the physical stability of stream system, protecting its organic components.     

Identifying Linkages Between Land Use,Geomorphology, and Aquatic Habitat in a Mixed-Use Watershed

The potential impacts of land use on large woody debris (LWD) were examined in Sourdough Creek Watershed, a rapidly growing area encompassing Bozeman, Montana, USA. We identified six land classes within a 250 m buffer extending on either side of Sourdough Creek and assessed aquatic habitat and geomorphologic variables within each class. All LWD pieces were counted, and we examined 14 other variables, including undercut bank, sinuosity, and substrate composition. LWD numbers were generally low and ranged from 0 to 8.2 pieces per 50 m of stream. Linear regression showed that LWD increased with distance from headwaters, riparian forest width, and sinuosity in four of the six land classes. Statistically significant differences between land classes for many aquatic habitat and geomorphologic variables indicated the impacts of different land uses on stream structure. We also found that practices such as active wood removal played a key role in LWD abundance. This finding suggests that managers should prioritize public education and outreach concerning the importance of in-stream wood, especially in mixed-use watersheds where wood is removed for either aesthetic reasons or to prevent stream flooding.     

Integrating Large Wood Jams into Hydraulic Models: Evaluating a Porous Plate Modeling Method

Large wood (LW) jams are key riverine habitat features that affect hydraulic processes and aquatic habitat. The hydraulic influence of LW jams is poorly understood due to the complexity of fluid dynamics around irregular, porous structures. Here we validated a method for two‐dimensional hydraulic modeling of porous LW jams using the open‐source modeling software Delft3D‐FLOW. We sampled 19 LW jams at three reaches across the Columbia River Basin in the United States. We used computer‐generated porous plates to represent LW jams in the modeling software and calibrated our modeling method by comparing model outputs to measured depths and velocities at validation points. We found that modeling outputs are error‐prone when LW jams are not represented. By representing LW jams as porous plates we reduced average velocity root mean square error (RMSE) values (i.e., improved model accuracy) by 42.8% and reduced average depth RMSE values by 5.2%. These differences impacted habitat suitability index modeling. We found a 15.1% increase in weighted useable area for juvenile steelhead at one test site when LW jams were simulated vs. when they were ignored. We investigated patterns in average RMSE improvements with varying jam size, bankfull obstruction, porosity, and structure type, and river complexity. We also identified research gaps related to field estimation of LW jam porosity and porous structure modeling methods.     

Prioritizing Agricultural Lands for Conservation Buffer Placement Using Multiple Criteria1

Qiu, Zeyuan, 2010. Prioritizing Agricultural Lands for Conservation Buffer Placement Using Multiple Criteria. Journal of the American Water Resources Association (JAWRA) 1-13. DOI: 10.1111/j.1752-1688.2010.00466.x Abstract: Although conservation buffers are multifunctional, the current conservation buffer planning strategies tend to use a single criterion, most frequently a hydrological or soil condition indicator, to guide conservation buffer placement. This study presents a watershed planning approach that prioritizes agricultural lands for conservation buffers based on multiple selection criteria and applies the approach to Raritan Basin in central New Jersey. The multiple selection criteria include soil erodibility, hydrological sensitivity, wildlife habitat, and impervious surface rate. These criteria capture the conservation buffers’ benefits in reducing soil erosion, controlling runoff generation, enhancing wildlife habitat, and mitigating stormwater impacts, respectively. An expert panel was used to identify and define the section criteria, review the measured values of those criteria, and develop the classification scales that assign the class score to each criterion. The prioritization is based on the summation of the criteria class scores. About one-third of agricultural lands are prioritized for conservation buffers in Raritan Basin. The total program cost of converting those prioritized agricultural lands to conservation buffers in Raritan Basin is estimated to be between $54.8 and 102.9 million depending on the composition of installed conservation buffer practices.     

冬季不同生境下菹草的水质净化效果研究

在室外通过人工构建静态模拟生态系统,研究冬季不同底质、水深、水质条件下,菹草对水体营养盐的吸收净化效果。结果表明,在不同水深或水质污染程度的相应组实验中,添加土壤改良剂的各组实验的TN、TP、NO3--N、高锰酸盐指数去除率均高于相应的未添加组,而NH4+-N去除情况相反;添加土壤改良剂有助于菹草对水体营养盐的综合去除,菹草在水深较深且营养盐负荷较高的水体中对营养盐的去除效果更好;水深35cm比水深25cm更适宜菹草的生长;菹草在实验设计的水质条件下能正常生长和对水质进行高效净化,适合在冬季运用于一般河道的水体修复。     

Biodiversity Conservation in Swedish Forests: Ways Forward for a 30-Year-Old Multi-Scaled Approach

A multi-scaled model for biodiversity conservation in forests was introduced in Sweden 30 years ago, which makes it a pioneer example of an integrated ecosystem approach. Trees are set aside for biodiversity purposes at multiple scale levels varying from individual trees to areas of thousands of hectares, with landowner responsibility at the lowest level and with increasing state involvement at higher levels. Ecological theory supports the multi-scaled approach, and retention efforts at every harvest occasion stimulate landowners’ interest in conservation. We argue that the model has large advantages but that in a future with intensified forestry and global warming, development based on more progressive thinking is necessary to maintain and increase biodiversity. Suggestions for the future include joint planning for several forest owners, consideration of cost-effectiveness, accepting opportunistic work models, adjusting retention levels to stand and landscape composition, introduction of temporary reserves, creation of “receiver habitats” for species escaping climate change, and protection of young forests.