湿式氨法工艺在火电厂脱硫领域的潜在优势及应用前景分析

通过与目前火电厂应用最广泛的脱硫方法石灰石／石膏法比较,提出了湿式氨法脱硫工艺在成本投入低、环境污染小及社会经济效益好三方面的潜在优势．并分析了该法在我国火电厂烟气脱硫领域的应用前景。     

含孤石土质边坡稳定性及破坏特征的数值分析*

为探究花岗岩风化形成的风化球孤石对边坡稳定性及破坏特征的影响,利用摄影测量和数字图像处理技术,对大量的孤石进行拍照及处理,建立大量具有各种形状的孤石模型,从所建立的孤石模型中选取具有不同形状参数的孤石,将其导入ABAQUS软件,建立含有孤石的边坡模型,进行有限元强度折减分析。结果表明:孤石的位置和大小会对边坡的安全系数产生规律性影响,而孤石的形状对边坡安全系数的影响表现出不确定性;孤石对边坡破坏特征产生影响,塑性应变区发展过程及位移场分布在孤石处与均质边坡相比均有较大变化。     

天然麦饭石负载TiO2的光催化性能研究

采用溶胶-凝胶法制备了二氧化钛负载于天然麦饭石表面热处理后得到复合光催化剂TiO2/麦饭石,并通过N2吸附-脱附、XRD及IR对其进行表征。探讨了以天然麦饭石为载体制备具有较高光催化活性的负载型TiO2/天然麦饭石复合物的各种影响因素:焙烧温度,加投量,pH值等。研究结果表明:200℃焙烧条件下TiO2/麦饭石复合物具有最大的光催化活性,达到了纯TiO2的光催化效果:对罗丹明B脱色率随着光催化剂增多而增大;对罗丹明B在pH值7～9时具有最大的降解率,开拓和优化TiO2光催化效能的新途径。     

模拟酸雨对石刻的腐蚀

采用pH值分别为5.6,4.5和3.0的人工模拟酸雨,在实验室条件下对具有相同成分的石材进行降雨侵蚀实验,测定了不同pH值下的腐蚀速率.同时,运用XRD和SEM分析酸雨腐蚀的规律.结果表明:酸雨侵蚀首先发生在颗粒间隙处;pH值愈低,腐蚀愈严重;酸雨腐蚀后,石材表面碳酸钙流失严重,其它成分相对富集在表面,而且改变了其原来的形貌.     

麦饭石对水溶液中铜离子的吸附作用研究

研究了麦饭石对水溶液中铜离子的吸附作用。其吸附率与粒度、用量、铜离子溶液、溶液的ｐＨ值和吸附时的温度等因素有关，比较了相同实验条件下麦饭石和活性炭的吸附能力，提出了工业应用的适宜条件。     

苏东坡治理河湖环境和赏石轶事

北宋大文豪苏东坡,曾先后任近十个州的地方官,为官清廉,勤政爱民,为百姓做好事。在徐州抗洪修堤、杭州治理西湖、颖州疏浚沟渠,受到百姓爱戴,堪称为古代一位水利专家。他还喜爱赏玩奇岩怪石,如砚石、仇池石、雪浪石等,也是古代一位赏石家。     

大巴山区早古生代地层和石煤中硒的化学活动性的初步研究

通过对大巴山区主要分布的早古生代地层中的碎屑岩，碳酸盐岩和石煤的原岩，风化岩，原生土壤的硒含量及其相关关系分析，及对南秦岭早古生代地层和石煤中硒的化学活动性进行了研究。结果表明：其岩石和石煤中的硒在地层环境下有较大的活动性，不同类型岩石中硒淋失率和硒的淋失量不同，富硒而淋失率低但淋失量高的下寒武统鲁家坪组和早志留世大贵坪组的炭质板岩和石煤的分布区土壤（主要为当地岩石的风化残积物）的含硒量可达10mg/kg，甚至更高，是大巴山的富硒带和硒中毒带，含硒低而且淋失率高的志留系砂岩和粉砂岩以及寒武系统砾屑灰岩分布区是大巴山区的低硒带。     

Yield and quality of charcoals from olive mill residues and its stone and pulp fractions: An enhanced comparative study

Pyrolysis is a promising way to upgrade large amounts of residues from olive oil processing into charcoal. Pyrolysis of the stone and pulp fractions needed to be investigated before conclusions could be drawn. We subjected the olive stone fraction, the pulp fraction, and a mixture of the two to dynamic pyrolysis and isothermal pyrolysis at 360°C. We characterized the charcoals resulting from isothermal pyrolysis at 360°C for different durations in terms of the fixed-carbon content (FCC), carbon content (CC), and high heating value (HHV). We found that charcoal yield from the pulp was higher than that from the stones, which were 38.1% and 32.9%, respectively, after pyrolysis for 360 min. This seemingly unexpected result was due to the high contents of ash (6.22%) and extractives (13%) in the pulp, which remained completely and partially undecomposed, respectively, in the charcoals and are accounted for when calculating yields. However, charcoals obtained from the stones were of higher quality than charcoals from the pulp, with lower ash content and higher FCC, CC, and HHV. In particular, the FCC, CC, and HHV after pyrolysis for 360 min were 73.2%, 74.4%, and 30.2 MJ/kg for the stones and only 61.8%, 63.2%, and 25.9 MJ/kg for the pulp, respectively. Depending on the required quality of the final charcoal, our results help decide whether to pyrolyse the entire olive residues or only one of the two fractions, more likely the stones.     

Evaluation of Overtopping Riprap Design Relationships

Rock riprap is one of the most widely used erosion control methods for protecting embankments, levees, spillways, and instream structures subjected to overtopping flow conditions. At least 21 stone‐sizing relationships exist to determine the median stone size of a protective riprap layer based on the results of 96 overtopping, laboratory experiments. Test parameters include median stone size, slope, unit discharge, coefficient of uniformity, and riprap layer thickness. A regression analysis was performed relating the observed median stone size to the predicted median stone size to each of the 21 relationships, yielding a coefficient of determination (R²) and percent error for the full spectrum of data. Zonal (partial spectrum of rock sizes) and complexity analyses were also conducted for each relationship. It was resolved that the Khan and Ahmad, and Chang relationships best aligned with the composite dataset. The predictive expressions by Olivier, Hartung and Scheuerlein, Knauss, Maynord, Abt and Johnson, and Siebel yield a noteworthy second tier of stone‐sizing relationships for overtopping conditions.     

包裹块石煤固氟燃料制备工艺研究

以石灰或烧制白云岩与粘土、低氟无烟煤粉作为包裹材料,通过正交试验方法,对陕西省紫阳县蒿坪镇高氟块状石煤进行了固氟效果研究。结果表明,影响包裹石煤固氟效果的主要因素是无烟煤粉和石灰,影响顺序是无烟煤粉>石灰>粘土。最佳制备工艺条件为石煤块∶无烟煤粉∶石灰∶粘土=70∶10∶10∶5,固氟率达91.9%。