基于静止卫星GOCI传感器的大气污染过程AOD监测

针对北京及周边地区2017年11月2~8日的一次污染过程,利用韩国静止卫星COMs1GOCI数据,对北京地区进行AOD监测.AOD反演采用时间序列迭代算法,根据地表反射率随时间慢变而大气气溶胶随时间快变的理论,采取最小值拟合的方式,获取气溶胶光学厚度数据.反演结果与地基AERONET监测结果具有很好的一致性,两者的相关系数R²大于0.89.AOD监测结果表明,GOCI传感器1次/h的监测频率,可以很好地展现北京地区大气污染过程的开始,发展及消散过程,可以展示出一天之内AOD的变化,为大气污染监测以及气候变化研究提供依据.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

Investigating the bacterial community and amoebae population in rural domestic wastewater reclamation for irrigation

Reclamation of domestic wastewater for agricultural irrigation is viewed as a sustainable option to create an alternative water source and address water scarcity. Free-living amoebae(FLA), which are amphizoic protozoa, are widely distributed in various environmental sources. The FLA could cause considerable environmental and health risks. However, little information is available on the risk of these protozoa. In this study, we evaluated the feasibility using rural domestic wastewater for agricultural irrigation, and analyzed dynamic changes of the microbial community structure and FLA populations in raw and treated wastewater, as well as the phyllosphere and rhizosphere of lettuce production sites that were irrigated with different water sources. The bacterial community dynamics were analyzed by terminal restriction fragment length polymorphism(T-RFLP). The bacterial community structures in the influent were similar to that in the effluent, while in some cases relative abundances varied significantly. The populations of Acanthamoeba spp. and Hartmannella vermiformis in the anaerobically treated wastewater were significantly higher than in the raw wastewater. The vegetables could harbor diverse amoebae, and the abundances of Acanthamoeba spp. and H. vermiformis in the rhizosphere were significantly higher than in the phyllosphere. Accordingly, our studies show insight into the distribution and dissemination of amoebae in wastewater treatment and irrigation practices.     

电絮凝净化含聚污水影响因素研究

目的为保障油田正常安全生产,促进油田含聚污水的循环利用。方法采用电絮凝技术单因素研究方法开展净化含聚污水的静态实验研究,探讨外加电流密度、极板间距、初始pH及聚合物浓度等因素对净化效果的影响规律。结果当初始pH为7.0,电流密度为4.0 m A/m2,极板间距为1.0 cm,电解16 min时,综合处理效果最佳。此时,含油量与浊度去除率分别为98.85%,99.93%,处理每克油平均消耗为0.0494 g的Al,处理每立方米含聚污水的能耗为0.2895 k Wh。污水中的聚合物浓度越小,净化效果越好。结论中性处理,极板间距为1.0 cm,外加电流密度为4.0 m A/m2,通电16 min是最佳处理条件。     

高温条件下高速碰撞试验技术研究

目的建立高温条件下结构的高速碰撞试验技术。方法基于理论和试验方法,研究影响试样加热/保温、碰靶速度和姿态的关键因素,利用次口径发射技术和电炉技术实现试样的加热、保温和加速。采用间接方法测试试样碰靶时的温度,联合应用次口径发射技术和靶体,控制试样的碰靶姿态,并利用高速摄影技术对其进行测试。通过薄壁圆柱筒的高温高速碰靶验证高温试验技术的有效性。结果建立了加热、加速和姿态控制一体化的高温高速碰撞试验技术,获得了不同尺寸薄壁圆柱筒不同姿态碰靶时的高温冲击动力学响应。正碰时,撞击端镦粗,尾端收缩,尾端的凹陷大于碰撞端的变形;侧碰时,圆筒呈马鞍状;角碰时的变形为楔形。随着圆筒的强度和刚度的降低,圆筒的变形增加,整体发生坍塌,出现大量的皱褶。结论建立的试验技术切实有效,可以用于高温条件下结构高速碰撞效应的研究。     

水稻土中五氯酚的降解转化动态及其对微生物群落的影响

采用室内培养实验,研究厌氧条件下水稻土中五氯酚(Pentachlorophenol,PCP)的还原转化与微生物群落组成变化。结果表明,室内培养实验条件下,PCP在水稻土样品中降解比较迅速,在反应17 d时,实验添加的PCP能够完全被还原转化。高通量测序结果显示PCP的添加明显改变了水稻土壤的微生物群落结构,其微生物多样性显著下降,在PCP降解完之后逐渐恢复。原始土壤以及添加PCP的土壤样品中其优势微生物主要分布在变形菌门(Proteobacteria)。PCP添加刺激了水稻土中伯克氏菌科(Burkholderiaceae)、丛毛单胞菌科(Comamonadaceae)、地杆菌科(Geobacteraceae)、红环菌科(Rhodocyclaceae)和假单胞菌科(Pseudomonadaceae)等脱氯相关的微生物菌群繁殖,成为PCP降解过程中的优势菌群,有利于PCP还原降解。本研究结果可为水稻土中有机氯农药污染物的微生物降解脱毒提供理论依据。     

半定量分析在电镀废水监测中的应用

以国家标准分析方法为依据 ,结合企业实际 ,具体阐述了六价铬、铜、镍的半定量分析方法 ,该方法具有测试准、投入少、易掌握、速度快等特点 ,对电镀废水处理设施的调试测定以及企业日常监测管理具有实际指导意义     

石墨炉原子吸收光谱法测定海河下游水中痕量镉

原子吸收光谱法直接测定高盐水中痕量镉时，有很大背景吸收和误差。本文采用络合—萃取技术使共存元素与待测元素分离，既消除了基体干扰，又达到了富集作用，使测定结果准确可靠。     

水质中高浓度挥发酚的预测

提出一种以溴水预测法确定高浓度挥发酚稀释倍数 ,为高浓度水样提供了一种科学准确的操作分析方法。简单快速 ,并能确保高浓度挥发酚水样分析的可靠性与成功性 ,具有很大的应用和推广价值     

奎屯市区城市废水排污系统网络化的探讨

根据奎屯市区城市废水的排放量大、排污口多、污染物浓度高以及排污下水管道污水处理设施的建成现状等特点，提出了以污水处理厂为治理中心，市区排污管道网络化的改造设想、存在问题及对策。